Theoretical spectroscopic studies of InI and InI+

Relativistic configuration interaction calculations are carried out to study the electronic structure and spectroscopic properties of InI and InI⁺. Potential energy curves of the ground and a number of low‐lying states are constructed. Spectroscopic parameters of the bound states of both species are computed and compared with the experimental and other theoretical data. Effects of spin‐orbit coupling on the spectroscopic properties are studied. Because of the presence of the heavy atoms the effect is large. The spin‐orbit splitting of the ground state (X²Π) of InI⁺ is more than 8350 cm^?1. As a result of the strong spin‐orbit interaction between X²Π and A²Σ⁺ of InI⁺, the potential energy curve of A²Σ becomes repulsive. Radiative lifetimes for the spin‐forbidden transitions such as A³Π?X¹Σ and B³Π₁ ?X¹Σ of InI and spin‐allowed transitions such as B²Σ⁺?A²Σ⁺, C²Π?A²Σ⁺, and B²Σ⁺?X²Π are calculated. Vertical and adiabatic ionization energies of InI and the electric dipole moments of both the neutral and ionic species are estimated. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Interactions between GaO4Al12(OH)24(H2O)12(7+) and cellulosic materials

The adsorption qualities of GaO(4)Al(12)(OH)(24)(H(2)O)(12)(7+), a polycation with ε-Keggin structure, and its stability in contact with anionic cellulosic materials, was investigated under different concentration and ionic strength conditions. The cellulosic materials employed were two different fully bleached fibre materials, carboxyl methyl cellulose (CMC), and a spin-coated cellulose model surface. As analytical techniques, pH-measurements, potentiometric titrations, ICP-OES, QCM-D, equilibrium calculations and Extended X-ray Absorption Fine Structure (EXAFS) were used. The adsorption is substantial and the addition of GaO(4)Al(12)(OH)(24)(H(2)O)(12)(7+) to a fibre suspension results in a rapid decrease in pH, followed by a small and slow increase in pH. This behaviour can be explained as due to a rapid and strong (log β>2) equilibrium adsorption of intact GaO(4)Al(12)(OH)(24)(H(2)O)(12)(7+) ions, followed by a slow, and minor, 3-8%, decomposition into different monomers. Alternative layer by layer adsorption of this ion, and CMC, on a spin-coated cellulose model surface constitutes further evidence for the strong interactions between the anionic cellulose materials and GaO(4)Al(12)(OH)(24)(H(2)O)(12)(7+). It is shown that the adsorption observed could not be described as due to an unspecific Donnan adsorption behaviour, neither of GaO(4)Al(12)(OH)(24)(H(2)O)(12)(7+) nor Ga and Al monomers, and specific surface complex formation is therefore discussed and applied. The (≡COO)(7)GaO(4)Al(12)(OH)(24)(H(2)O)(12) species found to explain the pH- and metal adsorption data should be considered strictly as a stoichiometric entity.     

Induced Biofilm Cultivation Enhances Riboflavin Production by an Intertidally Derived <Emphasis Type="Italic">Candida famata</Emphasis>

The aim of the investigation was to ascertain if surface attachment of Candida famata and aeration enhanced riboflavin production. A newly designed polymethylmethacrylate (PMMA) conico-cylindrical flask (CCF) holding eight equidistantly spaced rectangular strips mounted radially on a circular disk allowed comparison of riboflavin production between CCFs with hydrophobic surface (PMMA-CCF), hydrophilic glass surface (GS-CCF), and 500-ml Erlenmeyer flask (EF). Riboflavin production (mg/l) increased from 12.79 to 289.96, from 54.44 to 238.14, and from 36.98 to 158.71 in the GS-CCF, EF, and PMMA-CCF, respectively, when C. famata was grown as biofilm-induced cultures in contrast to traditional planktonic culture. Production was correlated with biofilm formation and planktonic growth was suppressed in cultivations that allowed higher biofilm formation. Enhanced aeration increased riboflavin production in hydrophilic vessels. Temporal pattern of biofilm progression based on two-channel fluorescence detection of extracellular polymeric substances and whole cells in a confocal laser scanning microscope followed by application of PHLIP and ImageJ volume viewer software demonstrated early maturity of a well-developed, stable biofilm on glass in contrast to PMMA surface. A strong correlation between hydrophilic reactor surface, aeration, biofilm formation, and riboflavin production was established in C. famata. Biofilm culture is a new-found means to improve riboflavin production by C. famata.     

Graphene oxide-based supramolecular hydrogels for making nanohybrid systems with Au nanoparticles

In the presence of a small amount of a proteinous amino acid (arginine/tryptophan/histidine) or a nucleoside (adenosine/guanosine/cytidine), graphene oxide (GO) forms supramolecular stable hydrogels. These hydrogels have been characterized by field-emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) analysis, Raman spectroscopy, and rheology. The morphology of the hydrogel reveals the presence of nanofibers and nanosheets. This suggests the supramolecular aggregation of GO in the presence of an amino acid/nucleoside. Rheological studies of arginine containing a GO-based hydrogel show a very high G' value (6.058 × 10(4) Pa), indicating the rigid, solid-like behavior of this gel. One of these hydrogels (GO-tryptophan) has been successfully utilized for the in situ synthesis and stabilization of Au nanoparticles (Au NPs) within the hydrogel matrix without the presence of any other external reducing and stabilizing agents to make Au NPs containing the GO-based nanohybrid material. The Au NPs containing the hybrid hydrogel has been characterized by using UV/vis spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). In this study, gold salt (Au(3+)) has been bioreduced by the tryptophan within the hydrogel. This is a facile "green chemical" method of preparing the GO-based nanohybrid material within the hydrogel matrix. The significance of this method is the in situ reduction of gold salt within the gel phase, and this helps to decorate the nascently formed Au NPs almost homogeneously and uniformly on the surface of the GO nanosheets within the gel matrix.     

Development of 1‐Hydroxy‐2(1H)‐quinolone‐Based Photoacid Generators and Photoresponsive Polymer Surfaces

A new class of carboxylate and sulfonate esters of 1‐hydroxy‐2(1H)‐quinolone has been demonstrated as nonionic photoacid generators (PAGs). Irradiation of carboxylates and sulfonates of 1‐hydroxy‐2(1H)‐quinolone by UV light (λ≥310 nm) resulted in homolysis of weak N? O bond leading to efficient generation of carboxylic and sulfonic acids, respectively. The mechanism for the homolytic N? O bond cleavage was supported by time‐dependent DFT calculations. Photoresponsive 1‐(p‐styrenesulfonyloxy)‐2‐quinolone–methyl methacrylate (SSQL‐MMA) and 1‐(p‐styrenesulfonyloxy)‐2‐quinolone–lauryl acrylate (SSQL‐LA) copolymers were synthesized from PAG monomer 1‐(p‐styrenesulfonyloxy)‐2‐quinolone, and subsequently controlled surface wettability was demonstrated for the above‐mentioned photoresponsive polymers.     

Photophysical studies of oxicam group of NSAIDs: piroxicam,meloxicam and tenoxicam

Oxicam group of non steroidal anti-inflammatory drugs has been chosen as a prototype molecular group that shows diverse biological functions and dynamic structural features. Photophysical studies of three drugs from this group viz., piroxicam, meloxicam and tenoxicam have been carried out in different solvents with varying polarity, H-bond character and viscosity. The spectral responses of different prototropic forms of these drugs towards varying solvent parameters have been studied, with the aim to characterize their interaction in biomimetic environment non-invasively. The nature of the lowest transition has been identified. The extinction coefficient, quantum yield and viscosity dependence on the nature of the solvents, all indicate the extreme sensitivity of these drugs to their microenvironment.     

Synchronization in coupled Ikeda delay systems

In this work, we demonstrate the use of a Field Programmable Gate Array (FPGA) as a physical platform for realizing chaotic delay differential equations (DDE). Moreover, using our platform, we also experimentally study the synchronization between two time delayed systems. We illustrate two different experimental approaches – one is hardware co-simulation (using a Digilent Atlys with a Xilinx Spartan-6 FPGA) and the other is analog output (using a Terasic DE2-115 with an Altera Cyclone IV E FPGA).     

Optimal exercise of jointly held real options: A Nash bargaining approach with value diversion

This paper provides a two-stage decision framework in which two or more parties exercise a jointly held real option. We show that a single party’s timing decision is always socially efficient if it precedes bargaining on the terms of sharing. However, if the sharing rule is agreed before the exercise timing decision is made, then socially optimal timing is attained only if there is a cash payment element in the division of surplus. If the party that chooses the exercise timing can divert value from the project, then the first-best outcome may not be possible at all and the second-best outcome may be implemented using a contract that is generally not optimal in the former cases. Our framework contributes to the understanding of a range of empirical regularities in corporate and entrepreneurial finance.     

Pd(0)-catalyzed couplings using bromide and chloride derivatives of Baylis-Hillman adducts with triarylbismuths as atom-efficient multi-coupling nucleophiles

Bromide and chloride derivatives of Baylis-Hillman adducts have been demonstrated to react efficiently with triarylbismuths affording allylic arylated products in high yields under palladium-catalyzed conditions. Triarylbismuths have been employed in sub-stoichiometric amounts as multi-coupling and atom-efficient nucleophiles in these reactions. The reactivity of both allylic bromides and chlorides was found to be facile and equally efficient in couplings with triarylbismuths.     

Relaxation and charge transport phenomena in polyaniline nanofibers: Swift heavy ion irradiation effects

Relaxation and charge transport mechanisms in hydrochloric acid (HCl) doped polyaniline (PAni) nanofibers synthesized using interfacial polymerization technique and the swift heavy ion irradiation effects have been investigated by dielectric relaxation spectroscopy. Non-Debye type relaxation with a distribution of relaxation times observed in PAni nanofibers is dominated by hopping of trapped charges. Swift heavy ion irradiation induces a benzenoid to quinoid transition in PAni nanofibers. Dynamic processes occurring at different frequencies in PAni nanofibers exhibit the same activation energy which reveals an enhanced coupling among the localized short range dipolar motions. The increase in conductivity relaxation time upon irradiation indicates an increase in the carrier hopping length thereby impeding charge transport. The ac conductivity of the pristine and irradiated PAni nanofibers has been found to obey the universal power law of frequency. Although charge transport in both the pristine and irradiated PAni nanofibers follows the correlated barrier hopping (CBH) model with polarons as major charge carriers, significant decrease in conductivity has been observed upon irradiation.