Ideal cylindrical cloak: perfect but sensitive to tiny perturbations

A cylindrical wave expansion method is developed to obtain the scattering field for an ideal two-dimensional cylindrical invisibility cloak. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary of the cloak shell. We confirm that a cloak with the ideal material parameters is a perfect invisibility cloak by systematically studying the change of the scattering coefficients from the near-ideal case to the ideal one. However, because of the slow convergence of the zeroth-order scattering coefficients, a tiny perturbation on the cloak would induce a noticeable field scattering and penetration.     

Electrochemical aptamer sensor for highly sensitive detection of mercury ion with Au/Pt@carbon nanofiber‐modified electrode

In this paper, an electrochemical aptamer sensor was proposed for the highly sensitive detection of mercury ion (Hg²⁺). Carbon nanofiber (CNF) was prepared by electrospinning and high‐temperature carbonization, which was used for the loading of platinum nanoparticles (PtNPs) by the hydrothermal method. The Pt@CNF nanocomposite was modified on the surface of carbon ionic liquid electrode (CILE) to obtain Pt@CNF/CILE, which was further decorated by gold nanoparticles (AuNPs) through electrodeposition to get Au/Pt@CNF/CILE. Self‐assembling of the thiol‐based aptamer was further realized by the formation of Au‐S bond to get an electrochemical aptamer sensor (Aptamer/Au/Pt@CNF/CILE). Due to the specific binding of aptamer probe to Hg²⁺ with the formation of T‐Hg²⁺‐T structure, a highly sensitive quantitative detection of Hg²⁺ could be achieved by recording the changes of current signal after reacting with Hg²⁺ within the concentration range from 1.0 × 10^?15 mol/L to 1.0 × 10^?6 mol/L and the detection limit of 3.33 × 10^?16 mol/L (3σ). Real water samples were successfully analyzed by this method.     

基于语义的软件服务故障自动诊断模型

模仿学习是机器人仿生机制研究的主要内容之一,即通过观察、理解、学习、模仿示教行为实现机器人的仿生特性。基于高斯过程分别表达采集离散示教信号所构成的示教轨迹和含有未知参数策略的模仿轨迹,构建模仿学习方法框架,将概率模型匹配引入到模仿学习中,以KL散度为代价函数比较两种轨迹的概率分布,运用梯度下降法寻求使KL散度最小的最优模仿控制策略,将策略应用于模仿机器人以完成与示教相同的模仿任务。以关节型机器人的机械臂摆动行为模仿为学习任务进行仿真,结果表明基于概率轨迹匹配的模仿学习方法能够实现机械臂摆动行为模仿,学习过程较传统方法简易且学习效果较好。     

Rapid analysis of aflatoxins B1, B2, and ochratoxin A in rice samples using dispersive liquid–liquid microextraction combined with HPLC

A novel, simple, and rapid method is presented for the analysis of aflatoxin B₁, aflatoxin B₂, and ochratoxin A in rice samples by dispersive liquid–liquid microextraction combined with LC and fluorescence detection. After extraction of the rice samples with a mixture of acetonitrile/water/acetic acid, mycotoxins were rapidly partitioned into a small volume of organic solvent (chloroform) by dispersive liquid–liquid microextraction. The three mycotoxins were simultaneously determined by LC with fluorescence detection after precolumn derivatization for aflatoxin B₁ and B₂. Parameters affecting both extraction and dispersive liquid–liquid microextraction procedures, including the extraction solvent, the type and volume of extractant, the volume of dispersive solvent, the addition of salt, the pH and the extraction time, were optimized. The optimized protocol provided an enrichment factor of approximately 1.25 and with detection of limits (0.06–0.5 μg/kg) below the maximum levels imposed by current regulations for aflatoxins and ochratoxin A. The mean recovery of three mycotoxins ranged from 82.9–112%, with a RSD less than 7.9% in all cases. The method was successfully applied to measure mycotoxins in commercial rice samples collected from local supermarkets in China.     

不同方法合成的沸石咪唑酯骨架结构材料(ZIF-8)的表征和催化性能

以二甲基咪唑为有机连接体和以Zn(OH)2或Zn(NO3)2·6H2O为Zn源,在甲醇与氨水的混合溶液、甲醇和DMF 3种不同的合成体系中合成了沸石咪唑酯骨架结构材料ZIF-8(分别记为ZIF-8(NH4OH)、ZIF-8(MeOH)和ZIF-8(DMF),并采用XRD、FTIR、N2吸附、SEM、TPD及Knoevenagel缩合反应等手段对所合成材料进行了表征。结果表明,采用这3种不同的合成方法均可成功制备出ZIF-8,所合成的ZIF-8的形貌基本一致,但其晶粒大小和酸碱性能有较大区别,同ZIF-8(NH4OH)和ZIF-8(DMF)相比,ZIF-8(MeOH)晶粒分布集中、平均粒径较小且具有较大的外比表面积和较多的酸碱位。不同方法合成的ZIF-8在苯甲醛和丙二腈的Knoevenagel缩合反应中的催化性能有很大差异,ZIF-8(MeOH)催化活性明显高于ZIF-8(DMF)和ZIF-8(NH4OH),其较高的催化活性,同其较大的外比表面积和酸碱性能密切相关。     

低温溶剂热法制备5V级性能优异的LiCr_(0.2)Ni_(0.4)Mn_(1.4)O_4正极材料(英文)

通过低温溶剂热的方法成功制备出了LiCr0.2Ni0.4Mn1.4O4尖晶石正极材料。通过此法,溶液的饱和蒸汽压急剧降低且在室温(25℃)下即可沸腾。所有的金属离子可在随后的热聚合过程中均匀分散且煅烧后所得材料无杂质相生成。采用了热重分析,X射线衍射,扫描电镜、循环伏安,交流阻抗等测试手段对材料进行了表征。结果表明:此法所得材料含有Mn3+,为Fd3m晶型,且其形貌规则、粒度分布均一。1C和10C下放电容量为140.5和121.0 mAh·g-1,10C下100次循环容量保持率高达96.9%。其优异的电化学性能可归因于均相的前驱体制备过程,高结晶度且无杂相生成,以及较高的锂离子扩散系数诸因素的共同作用。     

基于手机光线传感器为检测器的简易光度计的自组装设计

By using light sensors of the cellphone, we build a simple photometer which can be used in quantitative analysis experiments. We have performed 5 replicate measurements of iron with phenanthroline to verify reproducibility and stability. We find the absorbance of the sample has a good linear relationship with the concentrations of iron with a R² value around 0.999 and the RSD of 2.81%. The result is 4.94 μg·mL^-1 with spectrophotometer and 5.11 μg·mL^-1 with our photometer. The photometer is simple, convenient, accurate and realistic by using a phone as detector, which can replace the traditional spectrophotometer in the laboratory class. The students can enhance their understanding of the structure and principle of spectrophotometer by the DIY photometer experiment.     

Recent advances of ambient ionization mass spectrometry imaging in clinical research

The structural information and spatial distribution of molecules in biological tissues are closely related to the potential molecular mechanisms of disease origin, transfer, and classification. Ambient ionization mass spectrometry imaging is an effective tool that provides molecular images while describing in situ information of biomolecules in complex samples, in which ionization occurs at atmospheric pressure with the samples being analyzed in the native state. Ambient ionization mass spectrometry imaging can directly analyze tissue samples at a fairly high resolution to obtain molecules in situ information on the tissue surface to identify pathological features associated with a disease, resulting in the wide applications in pharmacy, food science, botanical research, and especially clinical research. Herein, novel ambient ionization techniques, such as techniques based on spray and solid‐liquid extraction, techniques based on plasma desorption, techniques based on laser desorption ablation, and techniques based on acoustic desorption were introduced, and the data processing of ambient ionization mass spectrometry imaging was briefly reviewed. Besides, we also highlight recent applications of this imaging technology in clinical researches and discuss the challenges in this imaging technology and the perspectives on the future of the clinical research.     

Seeking magneto-structural correlations in easily tailored pentagonal bipyramid Dy(III) single-ion magnets

Science China Chemistry - Controlling molecular magnetic anisotropy via structural engineering is delicate and fascinating, especially for single-molecule magnets (SMMs). Herein a family of...