Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.     

Perfectly alternating segmented polyimide-polydimethyl siloxane copolymers via transimidization

New strategies for the synthesis of perfectly alternating segmented polyimide-polydimethyl siloxane copolymers were developed by utilizing a transimidization method. Imide oligomers endcapped with 2-aminopyrimidine were reacted with aminopropyl terminated (dimethyl siloxane) oligomers to afford perfectly alternating segmented imide siloxane copolymers. The polymerization was conducted in solvents such as chlorobenzene and chlorofrom. High molecular weight, fully imidized perfectly alternating segmented imide siloxane copolymers were obtained within 2 h at temperatures of 60-110°C. The mechanism of the reaction was further elucidated via model compounds and NMR characterization. The block copolymers exhibited two T_gs due to the microphase separation of the polyimide and polysiloxane phases. The T_g of the polyimide phase was a function of the length of the polyimide block. However, partial phase mixing was also evident from the DSC results on the imide siloxane copolymers prepared with low molecular weight polyimide segments. Thermooxidative stability and tensile properties of the perfectly alternating segmented imide siloxane copolymers were found to be principally dependent on the amount of poly (dimethyl siloxane) incorporated in the copolymer and did not correlate with the poly (dimethyl siloxane) or polyimide block lengths. The stress-strain behavior of both solvent cast films or molded films is also reported. © 1994 John Wiley & Sons, Inc.     

Preparation and properties of dinitrogen complexes of molybdenum and tungsten with trimethylphosphine as coligand : III. Synthesis and properties of cis-[W(N2)2(PMe3)4], trans-[W(C2H4)2(PMe3)4] and [M(N2)(PMe3)5] (M = Mo,W). The crystal and molecular structure of [Mo(N2)(PMe3)5]

The reduction of [WCl₄(PMe₃)₃] with dispersed sodium, under dinitrogen, gives cis-[W(N₂)₂(PMe₃)₄], while under ethylene trans-[W(C₂H₄)₂(PMe₃)₄] is obtained. The ethylene complex can also be prepared by displacement of the dinitrogen molecules in cis-[W(N₂)₂(PMe₃)₄] by ethylene at room temperature and pressure. Interaction of cis-[M(N₂)₂(PMe₃)₄] complexes (M = Mo, W), with PMe₃, under helium or argon, yields [M(N₂)(PMe₃)₅]. The molybdenum complex crystallizes in the orthorhombic space group Pnma, with a 22.063(6), b 12.106(4), c 9.745(4) Å. The Mo—P distance trans to the dinitrogen ligand (2.483(7) Å) is slightly longer than the average of the other four Mo—P bonds (2.460(5) Å).     

Gas-liquid chromatography of fecal neutral steriods.

A method is described for the analysis of fecal neutral steriods with a dual-column gas-liquid chromatography (GLC) system. After saponification of the fecal slurry, the neutral steroids were extracted with hexane. The GLC separation of the compounds and quantitation were achieved by simultaneous injection of the derivatized and derivatized aliquots of the extract onto dual colmuns under identical conditions. The neutral steroids of interest were than identified by matching the retention times with those of known standards, and identification was confirmed by use of an interfaced GLC high-resolution mass spectrometry system. The detection limit was 0.003 mg of steroid/g of fecal slurry. The pricision of the method is illustrated by a relative standard diviation of 2-10% and a recovery of neutral steroids from 73-96%. The method was applied to the determination of fecal neutral steroids in a "High protein diet in colon cancer study". A considerably larger level of coprostanone than of coprostanol was observed. Data on neutral steroids in fecal samples from subjects on different diets are the subject of a separate publication.     

Cloud-point analysis of microlitre samples-determination of water in six common solvents

The classical cloud-point technique for determination of small amounts of water in organic solvents has been systematically investigated. The extreme sensitivity of the critical solution temperature of binary liquid mixtures to traces of impurity in one of the components makes the cloud-point method capable of high accuracy and sensitivity for routine determination of solvent contamination by water, and is admirably suited to analysis of small samples. Typically, the absolute error for water as contaminant is about 0.2% for 10-μl samples and 0.06 % for 50-μl samples. The critical solution temperature used was that of the n-hexane-methanol system. Its value is in dispute and considerable care was taken to obtain what is believed to be the correct value of 34,4 ± 0,2°. Small amounts of water in methanol, ethanol, 2-propanol, acetone, ethyl methyl ketone and dioxan were determined.     

Neutral solvent/crown ether interactions 3. Reorientation of the hydrogen bonds in the low temperature (−150°C) structure of 18-crown-6·2(CH3NO2)

The title complex was crystallized from a saturated solution of 18-crown-6 in nitromethane at 5°C and cooled to –150°C prior to X-ray diffraction data collection. At –150° C 18-crown-6·2(CH₃NO₂) is monoclinic,P2₁/_n witha=9.290(2),b=7.864(6),c=13.627(8) Å, =1000.84(4)° andD _calc=1.31 g cm^–3 for Z=2. Leastsquares refinement using 1521 independent observed reflections [F _o5(F _o)] led to a final conventionalR value of 0.041. The complex at –150°C is isostructural with its room temperature structure with the exception of the orientation of the methyl hydrogen atoms and their crown ether oxygen interactions. The methyl group hydrogen atoms were fully refined isotropically. The crown ether resides around a center of inversion and hasD _3d symmetry. There is one methyl hydrogen...crown interaction at 2.35(3) Å, one apparently bifurcated hydrogen bond utilizing a second methyl hydrogen atom (2.55(3), 2.65(3) Å) and the third hydrogen atom is actually directed away from the crown ring (closest H...O contact=2.67(3) Å). Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82048 (5 pages).For part 2, see reference [24].     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Etude de la réaction de l'acétylacétone avec les diamines hétéroaromatiques

The inluence of the starting o-diamine on the reaction products is shown in the condensation of heteroaromatic o-diamines with acetylacetone; 2,3- and 3,4-diaminopyridines gave only a crotonic intermediate providing imidazopyridines. On the other hand, 1,5-diaminoimidazoles gave tow types of compounds, imidazotriazepines and imidazopyridines. Triazolopyridazines were formed from 3,4-diaminotriazoles.