Redox site confinement in highly unsymmetric dimanganese complexes

A set of highly preorganized pyrazolate-bridged dimanganese complexes L(Mn)MnX have been prepared and structurally characterized. They can be described as hybrid organometallic/Werner-type systems that consist of a low-spin CpMn(I)(CO)2 subunit (Mn1) and a proximate tripodal tetradentate {N4} binding pocket accommodating a high-spin Mn(II) ion (Mn2), with Mn...Mn distances of approximately 4.3 A and different coligands bound to Mn2. Density functional theory (DFT) calculations (both the hybrid B3LYP and the pure BP86 functionals and the all-electron basis sets 6-311G and 6-311G*) confirm that the valence alpha and beta Kohn-Sham molecular orbitals (MOs) of these mixed-valent Mn(I)Mn(II) compounds have predominant Mn(3d) character and an almost perfectly localized nature: all five unpaired electrons are essentially localized at the Werner-type Mn2, whereas Mn1 possesses an effective closed-shell structure with the MOs of highest energy centered there. One-electron oxidation occurs in a clean process at approximately E(1/2) = -0.6 V (versus ferrocene/ferrocinium), giving the low-spin/high-spin Mn(II)Mn(II) species. UV/vis and IR spectroelectrochemistry as well as a detailed theoretical analysis reveal that the redox process takes place with strict site control at the organometallic subunit, while it does not significantly influence the spin and charge distribution on the Werner-type site. Positions and shifts of the nu(C[triple bond]O) absorptions are largely reproduced by the DFT calculations. These systems thus represent an exceptional example of the effect the unsymmetry of a dinucleating ligand scaffold has on the spin and charge distribution in homobimetallic complexes and might offer interesting prospects for the study of the cooperative effects of bimetallic arrays.     

Mixed micellar systems of octyl β,d-glucopyranoside with a nonionic surfactant and a water-soluble polymer

We have made a comparative study between the micellar regions of the octyl -d-glucoside (OG)–tetraethylene glycol monododecyl ether and the OG–poly(ethylene glycol) 20,000 systems by means of surface tension and viscosimetric measurements. The incorporation of the tetraethylene glycol monododecyl ether nonionic surfactant in the OG micelles decreases the critical micelle concentration, whereas the presence of polymer increases it. The nonionic surfactant mixture exhibits nonideal mixing behaviour. The data fit to Rubinghs treatment with a value of –5.1, which implies a modest attraction between both surfactants. The surfactant–poly(ethylene glycol) 20,000 system does not form mixed micelles. The incorporation of polymer increases the critical micelle concentration of the surfactant. The viscosity for the surfactant–polymer system is higher than that for the pure polymer, demonstrating a surfactant-induced structuring.     

Recent advances in the synthesis of well-defined glycopolymers

Glycopolymers are receiving increasing interest due to their application in areas, such as glycomics, medicine, biotechnology, sensors, and separation science. Consequently, new methods for their synthesis are constantly being developed, with an increasing emphasis on the preparation of well-defined polymers and on the production of complex macromolecular architectures such as stars. This review covers recent developments in the synthesis of glycopolymers, with a particular emphasis on (i) the use of controlled radical polymerization to prepare well-defined glycopolymers from unprotected monomers and (ii) postpolymerization modification strategies using reactive polymer precursors (including “click” reactions). Recent work on the production of glycosylated polypeptides, which are under investigation as mimics of naturally occurring glycoproteins, is also included. The authors offer some suggestions as to future developments and remaining challenges in this topical area of polymer chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci PartA: Polym Chem45: 2059–2072, 2007     

Structure Determination of a Complex Tubular Uranyl Phenylphosphonate, (UO(2))(3)(HO(3)PC(6)H(5))(2)(O(3)PC(6)H(5))(2).H(2)O, from Conventional X-ray Powder Diffraction Data

The three-dimensional structure of a complex tubular uranyl phosphonate, (UO(2))(3)(HO(3)PC(6)H(5))(2)(O(3)PC(6)H(5))(2).H(2)O, was determined ab initio from laboratory X-ray powder diffraction data and refined by the Rietveld method. The crystals belong to the space group P2(1)2(1)2(1), with a = 17.1966(2) ?, b = 7.2125(2) ?, c = 27.8282(4) ?, and Z = 4. The structure consists of three independent uranium atoms, among which two are seven-coordinated and the third is eight-coordinated. These metal atoms are connected by four different phosphonate groups to form a one-dimensional channel structure along the b axis. The phenyl groups are arranged on the outer periphery of the channels, and their stacking forces keep the channels intact in the lattice. The determination of this structure which contains 50 non-hydrogen atoms in the asymmetric unit, from conventional X-ray powder data, represents significant progress in the application of powder techniques to structure solution of complex inorganic compounds, including organometallic compounds.     

The nature of active sites in Ba(OH)2 catalyst

A general and repetitive method to determine the base strength and number of basic sites of catalysts with low surface area is reported. The nature of the titrating agent is discussed. The nature of the active sites of a Ba(OH)₂ catalyst with low surface area is discussed.

---

. . Ba(OH)₂, .

     

Hierarchical assembly of helicate-type dinuclear titanium(IV) complexes

The ligands 4-7-H(2) were used in coordination studies with titanium(IV) and gallium(III) ions to obtain dimeric complexes Li(4)[(4-7)(6)Ti(2)] and Li(6)[(4/5a)(6)Ga(2)]. The X-ray crystal structures of Li(4)[(4)(6)Ti(2)], Li(4)[(5b)(6)Ti(2)], and Li(4)[(7a)(6)Ti(2)] could be obtained. While these complexes are triply lithium-bridged dimers in the solid state, a monomer/dimer equilibrium is observed in solution by NMR spectroscopy and ESI FT-ICR MS. The stability of the dimer is enhanced by high negative charges (Ti(IV) versus Ga(III)) of the monomers, when the carbonyl units are good donors (aldehydes versus ketones and esters), when the solvent does not efficiently solvate the bridging lithium ions (DMSO versus acetone), and when sterical hindrance is minimized (methyl versus primary and secondary carbon substituents). The dimer is thermodynamically favored by enthalpy as well as entropy. ESI FT-ICR mass spectrometry provides detailed insight into the mechanisms with which monomeric triscatecholate complexes as well as single catechol ligands exchange in the dimers. Tandem mass spectrometric experiments in the gas phase show the dimers to decompose either in a symmetric (Ti) or in an unsymmetric (Ga) fashion when collisionally activated. The differences between the Ti and Ga complexes can be attributed to different electronic properties and a charge-controlled reactivity of the ions in the gas phase. The complexes represent an excellent example for hierarchical self-assembly, in which two different noncovalent interactions of well balanced strengths bring together eleven individual components into one well-defined aggregate.     

Estimation of the Nitta-Chao Parameters for the ether-group. Ether + n-alkane mixtures

In this work we have estimated the structural and interactional parameters of the ether- group for the group-contribution model of Nitta-Chao using a extensive experimental database of thermodynamic properties of ethers (monoethers, polyethers and acetals) and ether + n-alkane and ether + ether mixtures. The results obtained by Nitta-Chao model with this parameters get closer to the experimental values than those obtained with parameters of Eckart et al. (1986). The thermodynamic properties obtained by the Nitta-Chao model with old and new parameters were compared to predictions by other models such as Flory (1965) theory, DISQUAC (Kehiaian, 1977) model and UNIFAC model (versions of Dang and Tassios, 1986, and Larsen et al., 1987).     

Synthesis and characterisation of poly[2,2-(m-phenylene)-5,5-bibenzimidazole] as polymer electrolyte membrane for high temperature PEMFCs

Intermediate-high molecular weight poly[2,2-(m-phenylene)-5,5-bibenzimidazole] has been produced by mixing 3,3′,4,4′-tetraminobiphenyl and isophthalic acid in polyphosphoric acid as polycondensing agent and triphenyl phosphite as catalyst. Polymers with intrinsic viscosities close to 1 were measured in 97% sulphuric acid. Membranes were prepared by solution casting and subsequently immersed in phosphoric acid in order to gain ionic conductivity. These membranes were characterised by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analyses, methanol permeation and conductivity measurements. Levels of acid and water absorbed by the membranes were measured and the kinetic of this process was studied. Finally, doped membranes were tested in an actual fuel cell setup, obtaining also information about gases crossover from the open circuit potential. Acceptably reproducible molecular weights between 115,000 and 190,000 were obtained allowing the casting of mechanically stable membranes, which showed a great affinity towards phosphoric acid, high thermal stability, and a conductivity of 0.039 S/cm at 190 °C with the membrane equilibrated in saturated air at 60 °C. Open circuit potential of a PBI membrane was 0.99 V, close to those of commercial perfluorinated membranes. A H₂/O₂ fuel cell with dry gases was able to produce a maximum power output of 0.22 W/cm² at 175 °C.     

Diffuse-reflectance Fourier transform-infrared spectroscopic microanalysis of the flavonolignans

Diffuse-reflectance Fourier transform-infrared spectroscopic (DRIFT) microanalysis (10 g samples) of a selected series of flavonoids was studied, comparing to transmission FT-IR spectroscopic analysis of the same samples at the mg level. DRIFT was shown to be a useful, sample-saving and reliable IR technique for the structural analysis and compound identification of the mainSilybum genus 3-OH-flavonolignans (silybin, isosilybin, silydianin, silychristin and isosilychristin) and the dihydroflavonol taxifolin.