Coordination chemistry of f-block elements with imine acids. Part IV. Synthetic and chiroptical studies on lanthanide(III) complexes of imine acids derived from L-alanine,L-valine,L-tyrosine and L-glutamic acid

Summary N-(orthovanillidene)L-alanine (OVAlaH₂), N-(salicylidene)L-valine (SValH₂), N-(orthovanillidene)L-valine (OVValH₂), N-(orthovanillidene)L-tyrosine (OVTyrH₃) and N-(salicylidene)L-glutamic acid (SGluH₃) react with La^III, Pr^III, Nd^III and Sm^III to yield new chiral complexes. Their dominant conformers were determined from c.d. spectra supported by¹H n.m.r. data, except for the L-glutamic acid derived complexes which were insoluble.     

Quantification of Valerenic Acid in Valeriana jatamansi and Valeriana officinalis by HPTLC

A simple, rapid, cost-effective and accurate high performance thin layer chromatographic method has been developed for quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis which is one of the stable compounds of Valeriana officinalis and designated as a key marker compound. Valerenic acid makes substantial contribution to the sedative and spasmolytic activity of the essential oil and extract of Valeriana officinalis. Separation and quantification was achieved by HPTLC using ternary mobile phase of hexane: ethyl acetate: acetic acid (80:20:0.5 v/v) on precoated silica gel 60F₂₅₄ aluminium plates and densitometric determination was carried out after derivatization with anisaldehyde-sulphuric acid reagent at 700 nm, in absorption-reflectance mode. The calibration curves were linear in the range of (500 ng–2.5 μg). This is the first HPTLC report for the identification and quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis.     

Electrophoretic properties of complexes between DNA and the cationic surfactant cetyltrimethylammonium bromide

We use agarose gel electrophoresis to characterize how the monovalent catioinic surfactant cetyltrimethylammonium bromide (CTAB) compacts double-stranded DNA, which is detected as a reduction in electrophoretic DNA velocity. The velocity reaches a plateau at a ratio R = 1.8 of CTAB to DNA-phosphate charges, i.e., above the neutralization point, and the complexes retain a net negative charge at least up to R = 200. Condensation experiments on a mixture of two DNA sizes show that the complexes formed contain only one condensed DNA molecule each. These CTAB-DNA globules were further characterized by time-resolved measurements of their velocity inside the gel, which showed that CTAB does not dissociate during the migration but possibly upon entry into the gel. Using the Ogston-model for electrophoresis of spherical particles, the measured in-gel velocity of the globule is quantitatively consistent with CTAB having two opposite effects, reduction of both the electrophoretic charge and DNA coil size. In the case of CTAB the two effects nearly cancel, which can explain why opposite velocity shifts (globule faster than uncomplexed DNA) have been observed with some catioinic condensation agents. Dissociation of the complexes by addition of anionic surfactants was also studied. The DNA release from the globule was complete at a mixing ratio between anionic and cationic surfactants equal to 1, in agreement with equilibrium studies. Circular DNA retained its supercoiling, and this demonstrates a lack of DNA nicking in the compaction-release cycle which is important in DNA transfection and purification applications.     

Simulation of the Adhesion of Particles to Surfaces

The removal of micrometer and submicrometer particles from dielectric and metal films represents a challenge in postchemical mechanical polishing cleaning. Proper modeling of the adhesive force between contaminant particles and these films is needed to develop optimal solutions to postchemical mechanical polishing cleaning. We have previously developed and experimentally validated a model to describe the adhesion between spherical particles and thin films. This simulation expands previous models to characterize the adhesive interaction between asymmetrical particles, characteristic of a polishing slurry, and various films. Our simulation accounts for the contact area between particles and substrates, as well as the morphology of the surfaces. Previous models fail to accurately describe the contact of asymmetrical particles interacting with surfaces. By properly accounting for nonideal and geometry and morphology, the simulation predicts a more accurate adhesive force than predictions based upon an ideal van der Waals model. The simulation is compared to experimental data taken for both semi-ideal particle-substrate systems (polystyrene latex spheres in contact with silicon films) and asymmetrical systems (alumina particles in contact with various films). Copyright 2001 Academic Press.     

Benzyne cyclisation with carbanion activated aromatic rings1

Attempts to cyclise o-chlorophenyl benzyl ether, sulphide, sulphoxide and sulphone by treatment with KNH₂/NH₃ were unsuccessful. Similar reaction of 1-(o-chlorophenyl)-2,2-diphenylethane led to amination whereas α-(o-chlorobenzyl)phenylacetic acid gave a dihydrocoumarin. Reaction of 4- and 2-(o-chlorophenethyl)-pyridines, however, afforded products comprising benzisoquinolines and 1-pyridylbenzocyclobutenes.     

Theoretical study of the excited singlet and triplet states of alloxan

The possibility of excited‐state protomeric shifts in the biologically important molecule, alloxan, is investigated. We have focused on the S₁ and T₁ excited states of alloxan and its hydroxy tautomers. Modifications brought in by excitation on the relative stabilities, activation barriers, and optimized geometries, computed at the MNDO, AM1, and PM3 levels of approximation, have been discussed for both excited electronic states. The absorption and fluorescence spectra for the three tautomers are also discussed. Results show significant changes in the geometries on excitation, although the changes are similar for the singlet and triplet excited states. Though the relative stability orders do not change, the 2‐hydroxy tautomer is stabilized, while the 4‐hydroxy tautomer gets destabilized on excitation. The excited states are (n,π*) states, involving the promotion of a nonbonding oxygen lone pair from the CO? CO? CO moiety, which explains why the oxygens of this group become less basic and the 4‐hydroxy tautomer gets destabilized on excitation. However, the activation barriers do not reduce significantly on excitation, and this precludes the possibility of ground‐ or excited‐state proton transfer in the gas phase. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Extraction behavior of uranium(VI), plutonium(IV), zirconium(IV), ruthenium(III) and europium(III) with γ-pre-irradiated solutions of N,N′-methylbutyl substituted amides in n-dodecane

The extraction of plutonium(IV), uranium(VI), zirconium(IV), europium(III) and ruthenium(III) with -pre-irradiated n-dodecane solutions of methylbutyl substituted hexanamide (MBHA), octanamide (MBOA) and decanamide (MBDA) from 3.5M HNO₃ has been studied as a function of absorbed dose up to 184×10⁴ Gray. The distribution ratios (K_d) of uranium(VI) decreased gradually up to a dose of 50×10⁴ Gray and became almost constant thereafter, while ruthenium(III) and europium(III) were not extracted in the entire dose range studied. The K_d values of Pu(IV) decreased gradually up to 10×10⁴ Gray, for MBOA, and 30×10⁴ Gray for MBHA and MBDA and then increased up to a dose of 72×10⁴ Gray, indicating the synergistic effect of radiolytic products at higher doses. The extraction of zirconium(IV) was found to increase gradually up to 72×10⁴ Gray. However, the steep fall in K_d values of plutonium(IV), zirconium(IV) beyond a dose of 72×10⁴ Gray was atrributed to third phase formation. The radiolytic degradation of amides was monitored by quantitative IR spectroscopy and was found to follow the order MBOA>MBDA>MBHA at 184×10⁴ Gray having the amines and carboxylic acids as the main radiolytic products.     

The thermal decomposition of metal formates. II. Solid state thermal decomposition studies on magnesium formate dihydrate

Magnesium formate dihydrate has been synthesized by the action of formic acid on anhydrous magnesium oxide. This product analysed as Mg(COOH)₂ · 2H₂O. Its mode of thermal decomposition has been studied by thermal methods of analysis including simultaneous DTA/mass spectrometry. Nitrogen adsorption surface area of the solid products at various stages of its decomposition have been obtained. X-Ray diffraction and scanning electron micrographs have also been used to interpret the results. The decomposition of magnesium formate took place in three stages, which includes a phase change, at 265°C. The endotherm at 430°C changed to an exotherm in the presence of air; it corresponded to the decomposition of a new anhydrous phase of magnesium formate. The effect of the sample holder and changing atmospheres on the DSC analysis has been investigated. A scheme is presented for the thermal decomposition.     

Isocytosine as a hydrogen-bonding partner and as a ligand in metal complexes

Isocytosine (ICH; 1) exists in solution in an equilibrium of tautomers 1a and 1b with the N1 and N3 positions carrying the acidic proton, respectively. In the solid state, both tautomers coexist in a 1:1 ratio. As we show, the N3H tautomer 1b can selectively be crystallized in the presence of the model nucleobase 1-methylcytosine (1-MeC). The complex 1b x (1-MeC)2 x H2O (2) forms pairs through three hydrogen bonds between the components; hydrogen bonds between identical molecules are also formed, leading to an infinite tape structure. On the other hand, the N1H tautomer 1a co-crystallizes with protonated ICH to give [1a x ICH2]NO3 (3), again with three hydrogen bonds between the partners, yet the acidic proton is disordered over the two entities. With M(II)(dien) (M=Pt, Pd; dien=diethylenetriamine) preferential coordination of tautomer 1a through the N3 position is observed. DFT calculations, which were also extended to Pt(II)(tmeda) linkage isomers (tmeda=N,N,N',N'-tetramethylethylenediamine), suggest that intramolecular hydrogen bonding between the ICH tautomers and the co-ligands at M, while adding to the preference for N3 coordination, is not the major determining factor. Rather it is the inherently stronger Pt-N3 bond which favors complexation of 1a. With an excess of M(II)(dien), dinuclear species [M2(dien)2(IC-N1,N3)]3+ (M=Pd(II), 4 and Pt(II), 5) also form and were isolated as their ClO4(-) salts and structurally characterized. In strongly acidic medium 5 is converted to [Pt(dien)(ICH-N1)]2+ (6), that is, to the Pt(II) complex of tautomer 1b.