Reactions of the ionized enol tautomer of acetanilide: elimination of HNCO via a novel rearrangement

The reactions of ionised acetanilide, C(6)H(5)NH(=O)CH(3)(.+), and its enol, C(6)H(5)NH(OH)=CH(2)(.+), have been studied by a combination of tandem mass spectrometric and computational methods. These two isomeric radical cations have distinct chemistries at low internal energies. The keto tautomer eliminates exclusively CH(2)=C=O to give ionised aniline. In contrast, the enol tautomer loses H-N=C=O, via an unusual skeletal rearrangement, to form predominantly ionised methylene cyclohexadiene. Hydrogen atom loss also occurs from the enol tautomer, with the formation of protonated oxindole. The mechanisms for H-N=C=O and hydrogen atom loss both involve cyclisation; the former proceeds via a spiro transition state formed by attachment of the methylene group to the ipso position, whereas the latter entails the formation of a five-membered ring by attachment to the ortho position. The behaviour of labelled analogues reveals that these two processes have different site selectivities. Hydrogen atom loss involves a reverse critical energy and is subject to an isotope effect. Surprisingly, attempts to promote the enolisation of ionised acetanilide by proton-transport catalysis were unsuccessful. In a reversal of the usual situation for ionised carbonyl compounds, ionised acetanilide is actually more stable than its enol tautomer. The enol tautomer was resistant to proton-transport catalysed ketonisation to ionised acetanilide, possibly because the favoured geometry of the encounter complex with the base molecule is inappropriate for facilitating tautomerisation.     

Gold nanoparticles as a colorimetric sensor for protein conformational changes

Spherical gold nanoparticles and flat gold films are prepared in which yeast iso-1-cytochrome c (Cyt c) is covalently bound to the gold surface by a thiol group in the cystein 102 residue. Upon exposure to solutions of different pH, bound Cyt c unfolds at low pH and refolds at high pH. This conformational change causes measurable shifts in the color of the coated nanoparticle solutions detected by UV-VIS absorption spectroscopy and in the refractive index (RI) of the flat gold films detected by surface plasmon resonance (SPR) spectroscopy. Both experiments demonstrate the same trend with pH, suggesting the use of protein-covered gold nanoparticles as a simple colorimetric sensor for conformational change.     

Gas-phase reactivity of heterobinuclear oxometalate anions [CrMoO6(OR)]-, [CrWO6(OR)]-, and [MoWO6(OR)]- (R = H, nBu)

Heterobinuclear oxometalate anions based upon [CrMoO7]2-, [CrWO7]2-, and [MoWO7]2- were generated and transferred to the gas phase by the electrospray process from acetonitrile solutions containing two of the salts (Bu4N)2[MO4] (M = Cr, Mo, W). Their reactivities were examined and compared with those of the related homobinuclear anions based upon [M2O7]2- (M = Cr, Mo, W). Particular emphasis was placed upon reactions relevant to gas-phase catalytic cycles described previously for oxidation of alcohols by [Mo2O6(OH)]- (Waters, T.; O'Hair, R. A. J.; Wedd, A. G. J. Am. Chem. Soc. 2003, 125, 3384-3396). The protonated anions [MM'O6(OH)]- each reacted with methanol with loss of water to form [MM'O6(OCH3)]- at a rate that was intermediate between those of [M2O6(OH)]- and [M'2O6(OH)]-. The butylated anions [MM'O6(OBu)]- were generated by collisional activation of the ion-pairs {Bu4N+ [MM'O7]2-}-. Collisional activation of [MM'O6(OBu)]- resulted in either the loss of butanal (redox reaction) or the loss of butene (elimination reaction), with the detailed nature of the observations depending on the nature of both M and M'. Selective 18O labeling indicated that the butoxo ligands of [CrMoO6(OBu)]- and [CrWO6(OBu)]- were located on molybdenum and tungsten, respectively. This structural insight allowed a more detailed comparison of reactivity with the homobinuclear species, and highlighted the importance of the neighboring metal center in these reactions.     

Physical/chemical separations in the break-up of highly charged droplets from electrosprays

Highly-charged droplets, as formed by an electrospray process, are known to undergo asymmetric fission to form smaller droplets. We have observed a chemical and physical separation phenomenon that occurs in the droplet break-up process and is related to a compound's surface activity in solution. Two experimental approaches demonstrated that the smaller satellite droplets and the progeny droplets generated by the spray formation and asymmetric fission processes to be surfactant-enriched. These smaller droplets were also effectively separated from the larger primary and residual droplets because of their smaller inertia and high surface charge density, and a region attributed to the initially formed smaller satellite droplets was found to be strikingly confined in a narrow periphery region of the electrospray. The phenomenon may have utility for chemical separations and have significant implications for the sensitivity and selectivity of electrospray ionization-mass spectrometry.     

ZnS bubble clusters with onion-like structures

Following recent studies which showed that the most stable structures for (ZnS)(n) clusters (n= 10-47) are the so-called "bubble clusters", in which all the atoms are three-coordinated, we have used simulated annealing techniques to find the most stable structure for a larger cluster, (ZnS)(60). We find an onion-like structure, with one small cluster enclosed inside a bigger one. The inner cluster has the structure of a sodalite cage. Bonding between the inner and the outer clusters creates a network of four-coordinated atoms.     

The synthesis and electrochemistry of CpTiCl2(OR) (R = alkyl, aryl) complexes

The syntheses of several new CpTiCl₂(OR) (R = alkyl, aryl) complexes are described. It was possible to isolate pure product when the R group is substituted such as to cause steric crowding at the metal centre; for example, particularly good yields of the phenolate complexes were obtained when there were isopropyl substituents in the 2 and 6 positions of the phenolate. Electrochemical studies of the complexes in dry THF show that the Ti^III complexes are relatively stable, but only a diol complex could be reduced further to a Ti^II species. In general, the Ti^IV complexes undergo a reversible 1e⁻ reduction reaction. The chemistry is more complex if the electrolyte contains added water: both the Ti^IV and Ti^III complexes can react with water, the OR group being replaced by OH. The reaction is particularly rapid for the Ti^III alkoxide complexes.     

Light-regulated electrostatic interactions in colloidal suspensions

The net charge of a colloidal particle was controlled using light and a new photocleavable self-assembled monolayer (SAM). The SAM contained a terminal ammonium group and a centrally located carboxylic acid group that was masked with an ortho-nitrobenzyl functionality. Once exposed to UV light, the 2-nitrobenzyl group was cleaved, therefore transforming the colloidal particle from a net positive (silica-SAM-NH3+) to a net negative (silica-SAM-COO-) charge. By varying the UV exposure time, their zeta potential could be tailored between +26 and -60 mV at neutral pH. To demonstrate a photoinduced gel-to-fluid phase transition, a binary colloidal suspension composed of silica-SAM-NH3+ and negatively charged, rhodamine-labeled silica particles was mixed to form a gel. Exposure to UV light rendered all of the particles negative and therefore converted the system into a colloidal fluid that settles to form a dense sediment.     

Covalent bonding of alkene and alkyne reagents to graphitic carbon surfaces

Various aromatic and aliphatic alkynes and one alkene were covalently bonded to sp(2)-hybridized carbon surfaces by heat treatment in an argon atmosphere. X-ray photoelectron spectroscopy, Raman, and FTIR spectra of the modified surfaces showed that the molecules were intact after the 400 degrees C heat treatment but that the alkyne group had reacted with the surface to form a covalent bond. Alkynes with ferrocene and porphyrin centers exhibited chemically reversible voltammetric waves that could be cycled many times. Atomic force microscopy of the modified surfaces indicated a thickness of the molecular layer consistent with monolayer coverage, and surface coverage determined by voltammetry was also in the monolayer range. Raman spectroscopy of the porphyrin monolayers formed from a porphyrin alkyne showed no evidence for dimer formation, although multilayer formation may occur at undetected levels. FTIR spectra of the porphyrin-modified carbon surfaces were well-defined, similar to the parent molecule, and indicative of an average tilt angle between the porphyrin plane and the surface normal of 37 degrees . The bond between the molecular monolayer and the carbon surface was quite stable, withstanding sonication in tetrahydrofuran, mild aqueous acid and base, and repeated voltammetric cycling in propylene carbonate electrolyte. Heat treatment of alkynes and alkenes appears to be a generally useful method for modifying carbon surfaces, which can be applied to both aromatic and aliphatic molecules.     

Efficient low-temperature oxidation of carbon-cluster anions by SO2

Carbon-cluster anions, CN-, are very reactive toward SO2 (sticking probability of 0.012 +/- 0.005 for C27- at 25 degrees C), in contrast to their inertness toward other common atmospheric gases and pollutants. In flow reactor experiments at ambient temperature and near atmospheric pressure, primary adsorption of SO2 by the carbon cluster anions, N = 4-60, yields CNSO2- or CN-1S-. The inferred elimination of neutral CO2 is also detected as meta-stable decay in collision-induced dissociation. At higher temperatures, the reaction of SO2 with nascent carbon clusters yields CN-1SO- as well as undetected CO. The size-dependent initial reactivity reflects the previously established structural transitions (i.e., from chain to cyclic to cage structures). Such carbon clusters are formed in sooting flames and may act as nuclei for the formation of primary soot particles and serve as models for the local structural features of active soot particle sites for black-carbon soot. The facile generation of reactive carbon-sulfide and -sulfinate units may therefore have implications for understanding the health and environmental effects attributed to the coincidence of soot and SO2.     

Solution-phase, triangular ag nanotriangles fabricated by nanosphere lithography

A novel method to produce solution-phase triangular silver nanoparticles is presented. Ag nanoparticles are prepared by nanosphere lithography and are subsequently released into solution. The resulting nanoparticles are asymmetrically functionalized to produce either single isolated nanoparticles or dimer pairs. The structural and optical properties of Ag nanoparticles have been characterized. Mie theory and the Discrete Dipole Approximation method (DDA) have been used to model and interpret the optical properties of the released Ag nanoparticles.