Noise properties of a NMR transceiver coil array

The use of multiple radiofrequency (RF) surface coil elements has applications in both fast parallel imaging and conventional imaging techniques. Through implementation of a simple magnetic decoupling network, 50 Omega matching can be achieved in both the transmitter and receiver chains, enabling the use of conventional RF power amplifiers and preamplifiers for transceive applications. Unlike phased array coil arrangements using low impedance preamplifiers for decoupling, the noise correlation between 50 Omega coils decoupled with discrete components has not been characterized. We have measured the dependence of coil quality factor (Q-factor) and noise correlation on coil separation and shown these quantities to be consistent with theoretical arguments, at least at 4 T (170 MHz). Our results suggest that a coil system for transmission and reception of NMR signals with 50 Omega coils can be built to take advantage of all the benefits of conventional array coils and with the added advantages of using conventional amplifiers.     

Third-order elastic constants and pressure derivatives of the second-order elastic constants of β-tin

The second- and third-order elastic constants and pressure derivatives of second-order elastic constants of tetragonal β-tin have been obtained using the deformation theory. The strain energy density derived using the deformation theory is compared with the strain dependent lattice energy obtained from the elastic continuum model approximation to get the expressions for the second- and third-order elastic constants. Higher order elastic constants are a measure of the anharmonicity of a crystal lattice. The 12 non-vanishing third-order elastic constants and the six pressure derivatives of the second-order elastic constants in tetragonal β-tin are obtained in the present work and are compared with the available experimental values. The second-order elastic constant C₃₃ obtained in the present study is in reasonable agreement with the experimental values. The third-order elastic constants are generally one order of magnitude greater than the second-order elastic constants as expected of a crystalline solid. The third-order elastic constant C₃₃₃ is higher in magnitude than all other values. This shows a greater anharmonicity of β-tin along the c-axis direction of the crystal.     

Generalized diffusion solution for light scattering from anisotropic sources

The traditional diffusion theory, often used for isotropic sources, becomes inaccurate at short source-detector spacings and cannot be applied to media with large absorption or with small scattering strengths. We show that for any type of source anisotropy, a Green's-function-based procedure can remove these limitations. The accuracy of the new approach is examined through a comparison with the numerical solution to the radiative transfer equation.     

Study of surface-bulk mass transport and phase transformation in nano-TiO2 using hyperfine interaction technique

Phase transition from anatase to rutile for the 70 nm TiO₂ crystallite has been investigated by the time differential perturbed angular correlation (TDPAC) technique. The study involved the annealing of the TiO₂ nanocrystals, adsorbed with the nuclear probe (¹⁸¹Hf/¹⁸¹Ta) at trace level, at different temperatures for different durations. The TDPAC measurement was also supported by XRD measurement where the width of the peaks increases with the increase in annealing temperature indicating a crystal growth. The samples annealed up to 823 K for 4 h showed no phase transition, except for the growth of the crystallites. However, it showed phase transition at the same temperature (823 K), when annealed for longer duration, indicating the slower kinetics of the phase transition process. Further the sample, when annealed at 1123 K for 4 h, showed phase transition. It has also been observed that the ¹⁸¹Hf tracer, adsorbed on 70 nm anatase TiO₂, diffuses from surface to bulk during the phase transition process and the extent of diffusion in anatase differs from that in rutile phase. However, surface to bulk mass-transfer is found to play a significant role in the phase transition process.     

Preparation and physicochemical characterization of carbamazepine (CBMZ): para-sulfonated calix[n]arene inclusion complexes

The formation of inclusion complexes with para-sulfonated calix[n]arene (PSC[n]A) was studied for carbamazepine (CBMZ), a poorly water soluble anticonvulsant drug. The effect of PSC[4]A and PSC[6]A on aqueous solubility of carbamazepine was studied extensively. The complete complexation of the drug was achieved after 48 h of shaking with PSC[n]A in water and evaporation of water to get solid complex. The interaction between PSC[n]A and CBMZ in solid state inclusion complexes was accomplished by aqueous phase solubility studies, HPLC, DSC, PXRD, FTIR, UV–Vis, and FT-Raman spectroscopy. The solubility of CBMZ increases as a function of PSC[n]A concentration. The results of the two phase solubility experiments are in good conformity to signify the formation of 1:1 (PSC[6]A:CBMZ) and 2:1 PSC[4]A:CBMZ complexes. The order of dissolution rate of CBMZ is inclusion complex > physical mixture > drug alone. The purpose of this study was to enhance solubility resulting in high dissolution rate and bioavailability of this essentially water insoluble drug.     

Electro-dry-adhesion

This work presents novel conductive bioinspired dry adhesives with mushroom caps that enable the use of a synergistic combination of electrostatic and van der Waals forces (electro-dry-adhesion). An increase in shear adhesion bond strength of up to 2046% on a wide range of materials is measured when a maximum electrical field of 36.4 V μm(-1) is applied. A suction effect, due to the shape of the dry adhesive fibers, on overall adhesion was not noted for electro-dry-adhesives when testing was performed at both atmospheric and reduced pressure. Utilization of electrostatics to apply a preloading force to dry adhesive fiber arrays allows increased adhesion even after electrostatic force generation has been halted by ensuring the close contact necessary for van der Waals forces to be effective. A comparison is made between self-preloading of the electro-dry-adhesives and the direct application of a normal preloading pressure resulting in nearly the same shear bond strength with an applied voltage of 3.33 kV on the same sample.     

The influence of indoxyl sulfate and ammonium on the autofluorescence of human urine

Despite biological variability the spectral characteristics of undiluted human urine show relatively low autofluorescence at short UV (250-300 nm) excitation. However with dilution the fluorescence intensity remarkably increases. This paper examines the mechanisms behind this effect, by using excitation-emission matrices. Corrections for the inner filter effect were made for improved understanding of the spectral patterns. We focused on three major fluorophores (tryptophan, indoxyl sulfate and 5-hydroxyindole-3-acetate) that are excited at these wavelengths, and whose content in urine is strongly linked with various health conditions. Their fluorescence was studied both individually and in combinations. We also examined the effect of ammonium on the fluorescence of these major fluorophores individually and in combinations. Through these studies we have identified the leading effects that reduce the UV fluorescence, namely higher concentration of indoxyl sulfate producing the inner filter effect and concentration quenching and quenching of fluorophores by ammonium. This result will assist in broader utilisation of UV fluorescence in medical diagnostics.     

Photocondensation polymers: Polybenzopinacols. II. Photolytic coupling of aromatic diketones

Photolytic condensations of p,p′-dibenzoyldiphenyl sulfide, p,p′-dibenzoyldiphenyl ether, p,p′-dibenzoyldiphenylmethane, and p,p′-dibenzoyldiphenylethane with a 100-W long-wavelength ultraviolet lamp gave polypinacols having inherent viscosities ranging from 0.12 to 0.45. Treatment of the same monomers under similar conditions with a 450-W ultraviolet lamp produced polypinacols having inherent viscosities ranging from 0.04 to 0.37.