高散射介质中光子扩散成像的线性平移不变性

运用微扰理论探讨了光子扩散成像的线性平移不变性,阐明了光子扩散成像用于生物组织这一高散射介质结构与功能成你的信号形成机理.光子扩散成像所得的图像是介质内部异常结构通过光子扩散成像系统的响应.光子扩散成像系统的作用可用一个脉冲响应函数来表征.     

A convenient synthesis of 5‐(O,O‐dialkylphosphoryl)‐4‐aryl‐3,4‐dihydropyrimidin‐2(1H)‐ones

A general and convenient route for the synthesis of dihydropyrimidines bearing the phosphoryl moiety by a one‐pot cyclocondensation involving aldehydes, urea, and O,O‐dialkyl‐2‐oxo‐propanephosphonates, using ytterbium triflate as catalyst, is reported. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:13–17, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10058     

Shear‐Induced Morphological Change in PP/LLDPE Blend

The morphology of a PP/LLDPE blend (50 : 50) by phase dissolution at high shear rate combined with dynamic packing injection molding at low shear rate was investigated by atomic force microscopy. Phase dissolution under high shear rate is manifested by a co‐continuous two‐phase structure that could be broken down to an island‐like structure when a low shear rate is applied via dynamic packing injection molding or simply by manual deformation.     

镍基合金掺杂W、Mo原子在γ/γ＇相界面扩散机理研究

运用基于密度泛函理论的第一性原理,研究掺杂W、Mo在镍基高温合金的沉淀强化γ′相分配差异的因素.通过VASP软件,建立γ′-Ni₃(Al_3/8Ti_5/8)相的体系模型,选取非等效位置的不同阵点,计算W、Mo原子在不同位置的替代形成能,分析W、Mo在γ′相的占位倾向;计算掺杂W、Mo原子前后,界面的吸附能,研究掺杂W、Mo对相界的影响;计算W、Mo原子从γ向γ′相扩散,获得W、Mo扩散的路径与势垒.结果表明,W、Mo的掺杂优先替代γ′-Ni₃(Al_3/8Ti_5/8)相5号Al原子,并提高相界的稳定性;分配的差异是W相比于Mo替代γ′相位置的Al原子更易形成空位,而γ相中的Ni原子较难形成空位,且逆扩散所需能量更多导致的.     

单原子Al修饰空位缺陷V2C（MXene）对H2气体表面吸附的第一性原理研究

基于第一性原理计算方法,对含空位缺陷的V₂C(MXene)在不同位点修饰单原子Al的相关性能进行系统研究.研究表明,几何优化后得到含空位缺陷的V₂C稳定结构表面能为-3075.53 J/m²,单原子Al修饰本征V₂C单原子的吸附能为1.5511eV、单原子Al修饰空位缺陷V₂C的吸附能为-2.0763 eV,这表明含空位缺陷的V₂C,由于单原子Al的修饰可以明显改善晶体结构稳定性.进一步从态密度、分波态密度、吸氢能力研究发现,各体系态密度和分波态密度均出现分波越过费米能级的现象,表现出较强的金属性;V₂C吸附H₂气体分子吸附能为-7.5867 eV,而空位缺陷V₂C和单原子Al修饰空位缺陷V₂C两个体系对H₂气体分子的吸附能仅为-0.9851 eV、-2.7130 eV,均未能进一步改善V₂C对H₂气体分...     

贵金属钌基催化剂合成及应用研究进展

钌催化剂是近年来新兴的贵金属催化剂,其负载型催化剂具有节约成本、可回收利用、催化性能优异等优势,受到研究人员的广泛关注。本文对负载型钌基催化剂在氨合成反应、加氢反应、氧化反应的合成及应用进行了综述,主要阐述了反应过程中的载体与助剂、制备方法和催化性能,并对当前反应中存在的问题进行归纳和总结,最后提出负载型钌基催化剂现阶段亟需解决的问题以及对未来的主要发展趋势进行了展望。     

多相催化过硫酸盐工艺处理水环境中有机污染物的非自由基过程

20世纪80年代至今,水处理技术中的高级氧化过程(AOP)已被广泛研究及应用。然而水体中的有机污染物仍因种类繁多和降解难易不同困扰着研究者们,因此对于AOP的机理过程需要更深入的分析认识,以利于技术的进一步发展及应用。AOP中的过硫酸盐氧化工艺近年来得到大量关注,其自由基机理的关键活性物种是·OH 和·SO₄^-。非自由基机理分为¹O₂氧化和PS直接氧化(也称电子转移),某些体系中高价态金属也直接或间接地参与氧化过程。但非自由基过程的发生机理及优势特点仍存在争议。本文综述了基于多相催化过硫酸盐高级氧化过程处理水中有机污染物的最新研究,阐述反应机理及其分析手段,并指出当前研究可能存在的问题。对于过硫酸盐高级氧化工艺中非自由基过程的未来研究方向及应用前景提出展望。     

A novel dendritic anion conductor: quaternary ammonium salt of poly(amidoamine) (PAMAM)

The quaternary ammonium salts of dendritic poly(amidoamine) generations 2 and 3 are prepared by methylation and quaternization with methyl iodide. The obtained dendritic anion conductors exhibit a conductivity of 10^–5–10^–6 S·cm^–1 at ambient temperature. The plots of conductivity vs. temperature are curves with the lowest point around 58°C, which appear to exhibit a substantially different conductive law compared with ordinary linear or comb-like polyelectrolytes.     

Diallyl Trisulfide,the Antifungal Component of Garlic Essential Oil and the Bioactivity of Its Nanoemulsions Formed by Spontaneous Emulsification

The aim of this study was to evaluate the chemical compounds of garlic essential oil (EO), and determine the antifungal efficacy of garlic EO and its major components, diallyl trisulfide and its nanoemulsions against wood-rotting fungi, Trametes hirsuta and Laetiporus sulphureus. GC-MS analysis revealed that the major constituents of garlic EO were diallyl trisulfide (39.79%), diallyl disulfide (32.91%), and diallyl sulfide (7.02%). In antifungal activity, the IC₅₀ value of garlic EO against T. hirsuta and L. sulphureus were 137.3 and 44.6 μg/mL, respectively. Results from the antifungal tests demonstrated that the three major constituents were shown to have good antifungal activity, in which, diallyl trisulfide was the most effective against T. hirsuta and L. sulphureus, with the IC₅₀ values of 56.1 and 31.6 μg/mL, respectively. The diallyl trisulfide nanoemulsions showed high antifungal efficacy against the examined wood-rotting fungi, and as the amount of diallyl trisulfide in the lipid phase increases, the antifungal efficacy of the nanoemulsions increases. These results showed that the nanoemulsions and normal emulsion of diallyl trisulfide have potential to develop into a natural wood preservative.