Aureomycin nitrate,its preparation and identification

Summary Aureomycin hydrochloride does not show any promise as a reagent for qualitative detection or quantitative estimation of any of the common cations or aidons. The well developed crystals of the rather insoluble nitrate may be used for the identification of aureomycin. The low solubility of the nitrate may give a better stability as compared with the hydrochloride, which would be of interest to the pharmacist.

---

Zusammenfassung Versuche mit Aureomycinhydrochlorid gaben keine Anhaltspunkte für eine Eignung dieser Verbindung als Reagens für die Auffindung oder Bestimmung der häufig angetroffenen Kationen oder Anionen. Die gut ausgebildeten Kristalle des wenig löslichen Nitrats können für die Erkennung von Aureomycin benützt werden. Die geringe Löslichkeit des Nitrats erhöht dessen Beständigkeit im Vergleich zum Hydrochlorid, was für Pharmazeuten von Interesse sein könnte.

---

Résumé Le chlorhydrate d'auréomycine ne montre aucune propriété intéressante comme réactif de recherche qualitative ou d'estimation quantitative des cations et anions courants. On peut utiliser les cristaux bien développés de son nitrate assez peu soluble pour identifier l'auréomycine. La faible solubilité de ce nitrate peut lui conférer une meilleure stabilité que celle du chlorure ce qui est digne d'intérêt pour les pharmaciens.

---

---

Dedicated to Prof. Dr.Hans Lieb at his 70th birthday.     

Molecular distillation

Molecular distillation was studied for the separation of tocopherols from soya sludge, both experimentally and by simulation, under different operating conditions, with good agreement. Evaporator temperatures varied from 100°C to 160°C and feed flow rates ranged from 0.1 to 0.8 kg/h. The process pressure was maintained at 10⁻⁶ bar, the feed temperature at 50°C, the condenser temperature at 60°C, and the stirring at 350 rpm. For each process condition, samples of both streams (distillate and residue) were collected and stored at −18°C before tocopherols analyses. Owing to the differences between molecular weights and vapor pressures of free fatty acids and tocopherols, tocopherols preferentially remained in the residue at evaporator temperatures of 100°C and 120°C, whereas for higher temperatures (140°C and 160°C) and lower feed flow rate, tocopherols tended to migrate to the distillate stream.     

Stereoselective diversity-oriented solution and solid-phase synthesis of tetrahydroquinoline-based polycyclic derivatives

A diversity-oriented solution and solid-phase synthesis of tetrahydroquinoline-based tricyclic derivatives has been achieved from enantiomerically pure, natural product-like bicyclic scaffold. The solution synthesis of enantiopure bicyclic scaffold was developed by asymmetric hetero Michael reaction. Our approach for the synthesis of polycyclic derivatives utilized regio- and stereoselective hetero Michael reaction and ring-closing metathesis as key steps in solution and on solid phase.     

Solution- and solid-phase synthesis of natural product-like tetrahydroquinoline-based polycyclics having a medium size ring

A solid-phase synthesis of tetrahydroquinoline-derived polycyclic 4, having a medium size ring with an enamide functionality, was achieved from tetrahydroquinoline derivative 3 in five steps with overall 40-45% yield. An enantiopure, tetrahydroquinoline-derived beta-amino ester, 1, was converted into compound 2 that has a free phenolic hydroxyl group as an anchoring site for solid-phase synthesis. The solid-phase worked well for this sequence, in which the synthesis of the unsaturated eight-membered enamide lactam was obtained by a ring-closing metathesis approach. Compound 4 is a novel, natural product-like polycyclic derivative that could further be utilized in library generation for developing small molecule chemical probes.     

Effects of citrate on the composition and enzymic coagulation of colloidal bovine casein aggregates

Colloidal casein aggregates (CCA) prepared from soluble whole bovine caseinates in the presence of Ca²⁺ and phosphate (Pi) ions by addition of different citrate (Cit) concentrations showed different mineral and proteic composition. Citrate concentration conditions the Ca and Pi concentrations incorporated into CCA, probably due to the complexing effect of this anion on calcium. A significant change in the incorporated Ca/Pi ratio at 8 mM citrate could very likely be associated to changes in CCA net charge. The incorporation of individual caseins to the colloidal particles obtained, as well as their average size and size distribution, depended also on the Cit concentration used [Cit]_P. α_S- and β-caseins assembled in the CCA structure sharply decreased at a [Cit]_P higher than 15 mM, i.e., at a low Ca²⁺ concentration in the aggregates, showing that the presence of this cation is necessary for the incorporation of these caseins. An inverse relationship between the aggregation step rate in CCA enzymic coagulation and their average size was observed. The aggregation rate vs the average size curve obtained at [Cit]_P 8 mM clearly differed from the curves obtained at 10 and 12 mM, respectively, a fact probably related to a change in the CCA net charge. This behavior showed the effect of citrate concentration on CCA functional properties.     

Folate antagonists. 6. Synthesis and antimalarial effects of fused 2,4-diaminothieno[2,3-d]pyrimidines

2,4-Diamino-5,7-dihydro-6H-thiopyrano[4′,3′:4,5]thieno[2,3-d]pyrirnidine, 2,4-diamino-9H-mdeno[1′,2′:4,5]thieno[2,3-d]pyrimidine, 2,4-diamino-5H-indeno[2′,1′:4,5]thieno[2,3-d]pyrimidine, 9,11-diamino-5,6-dihydronaphtho[1′,2′:4,5]thieno[2,3-d]pyrimidine, 7,9-diamino-5,6-dihydronaphtho[2′,1′:4,5]thieno[2,3-d]pyrimidine, 2,4-diamino-7-benzy]-5,6,7,8-tetrahydropyrido[4′,3′:4,5]thieno[2,3-d]pyrimidine, and various 2,4-diamino-5,6,7,8-tetrahydro-[1]benzothieno[2,3-d]pyrimidines were synthesized by cyclization of the requisite fused 2-aminothio-phenene-3-carbonitriles utilizing chloroformamidine hydrochloride in diglyme. Several compounds exhibited strong inhibitory effects against Streptococcus faecalis (MGH-2), Staphylococcus aureus (UC-76), Streptococcus faecium (ATCC 8043), Lactobacillus casei (ATCC 7469), and Pediococcus cerevisiae (ATCC 8081) in vitro, and three compounds displayed antimalarial activity against Plasmodium berghei in mice and P. falciparum (Uganda I) in vitro.     

Determination of As, Sb, Se, Te and Bi in milk by slurry sampling hydride generation atomic fluorescence spectrometry

A simple and fast analytical procedure has been developed for the determination of As, Sb, Se, Te and Bi in milk samples by hydride generation atomic fluorescence spectrometry (HG-AFS). Samples were treated with aqua regia for 10 min in an ultrasound water bath and pre-reduced with KBr for total Se and Te determination or with KI and ascorbic acid for total As and Sb, the determination of Bi being possible in all with or without pre-reduction. Slurries of samples, in the presence of antifoam A, were treated with NaBH₄ in HCl medium to obtain the corresponding hydrides, and AFS measurements were processed in front of external calibrations prepared and measured in the same way as samples. Results obtained by the developed procedure compare well with those found after microwave-assisted complete digestion of samples. The proposed method is simple and fast, and only 1 ml of milk is needed. The values obtained for detection limit are 2.5, 1.6, 3, 6 and 7 ng l⁻¹ for As, Sb, Se, Te and Bi respectively in the diluted samples, with average relative standard deviation values of 3.8, 3.1, 1.9, 6.4 and 1.2% for three independent analysis of a series of commercially available samples of different origin. Data found in Spanish market samples varied from 3.2±0.3 to 11.3±0.2 ng g⁻¹ As, from 3.1±0.2 to 11.6±0.4 ng g⁻¹ Sb, from 10.7±0.5 to 25.5±0.4 ng g⁻¹ Se, from 0.9±0.2 to 9.4±0.6 ng g⁻¹ Te and from 11.5±0.1 to 27.7±0.4 ng g⁻¹ Bi.     

Chemoselective hydrogenation catalysts: Pt on mesostructured CeO2 nanoparticles embedded within ultrathin layers of SiO2 binder

Pt on mesostructured CeO(2) nanoparticles embedded within ultrathin layers of highly structured SiO(2) binder shows highest activity reported with 80% selectivity for the chemoselective hydrogenation of crotonaldehyde. Characterization by transmission electron microscopy (TEM), CO adsorption, and X-ray photoelectron spectroscopy (XPS) show the presence of small Pt metal particles, preferentially located on CeO(2) (70%) together with the formation of Pt-CeO(2-x) sites at the interface between Pt and CeO(2) (4 nm) nanoparticles. These sites are able to polarize the carbonyl group and facilitate the selective hydrogenation of this with respect to the double bond.     

Formation of a cyclobutylidene ring: intramolecular [2 + 2] cycloaddition of allyl and vinylidene C=C bonds under mild conditions

Intramolecular [2 + 2] cycloaddition of two C=C bonds in vinylidene complexes [Ru(eta5-C9H7){=C=C(R)H}(PPh3){kappa1-(P)-PPh2(C3H5)][BF4] affords cyclobutylidene complexes [Ru(eta5-C9H7){kappa2-(P,C)-(=CC(R)HCH2CHCH2PPh2)}(PPh3)][BF4], which can be also obtained by reaction of terminal alkynes with [Ru(eta5-C9H7)(PPh3){kappa3-(P,C,C)-PPh2(C3H5)}][PF6]. The reaction proceeds under mild conditions via vinylidene complexes, and the activation parameters were determined by kinetic studies.     

Application of a chemometric method for simultaneous determination of acetaminophen and diclofenac in content-uniformity and drug-dissolution studies

A new, repeatable, and rapid method has been developed for resolution of binary mixtures of acetaminophen and diclofenac with minimum sample pretreatment and without separation of the analytes. The method, based on the PLS1 processing of absorbance data in the UV region, was successfully used for quantification of the drug content of three tablet preparations. The results obtained were in good agreement with HPLC recovery data. The method also enabled determination of drug-dissolution profiles of these commercial tablets, by simultaneous determination of both analytes during the dissolution test.