Effets de cryptands et activation de bases—II: Genese d'enolates et essais d'activation de LiH,NaH et KH dans l'ether,le THF et le benzene

The generation of the lithium, sodium and potassium enolates of cyclohexanone using LiH, NaH and KH has been investigated. The utilization of macrocyclic ligands (which selectively complex the metal cation) activated the alkaline hydride reagent. However, the most dramatic effect was the activation of the enolate, enabling proton abstraction from the solvent.     

A novel ditopic zinc-salophen macrocycle: a potential two-stationed wheel for [2]-pseudorotaxanes

Crown ether macrocycle 1 including a zinc-salophen unit is obtained via a de novo synthetic design to give a potential pH-driven two-stationed wheel component of [2]-pseudorotaxane systems.     

A new approach to flow-batch titration. A monosegmented flow titrator with coulometric reagent generation and potentiometric or biamperometric detection

Monosegmented flow analysis (MSFA) has been used as a flow-batch system to produce a simple, robust, and mechanized titrator that enables true titrations to be performed without the use of standards. This paper also introduces the use of coulometry with monosegmented titration by proposing a versatile flow cell. Coulometric generation of the titrand is attractive for titrations performed in monosegmented systems, because the reagent can be added without increasing the volume of sample injected. Also, biamperomeric and potentiometric detection of titration end-points can increase the versatility of the monosegmented titrator. The cell integrates coulometric generation of the titrand with detection of end-point by potentiometry or biamperometry. The resulting titrator is a flow-batch system in which the liquid monosegment, constrained by the interfaces of the gaseous carrier stream, plays the role of a sample of known volume to be titrated. The system has been used for determination of ascorbic acid, by coulometric generation of I₂ with biamperometric detection, and for determination of Fe(II), by coulometric generation of Ce(IV) with potentiometric detection of the end-point, both in feed supplements.     

Near infrared emission spectroscopy induced by ultrasonic irradiation

Near infrared emission caused by ultrasonic excitation is demonstrated for the first time in this work. The instrument is constituted of an acousto-optical tunable filter-based spectrometer, an ultrasonic processor connected to a titanium alloy ultrasonic probe and a cylindrical borosilicate flask containing the sample to be excited. The radiation emitted by the sample is collected by a concave mirror and sent to the spectrometer. The effects of the position of the probe extremity in relation to a lateral entrance of the borosilicate flask and of the ultrasonic power on the emission signal were studied. The best results were obtained by positioning the probe extremity up to 2mm from the reflexive body (lateral entrance) using 30% of the full ultrasonic incident power and acquiring spectra after 5 min of sonication. The NIR emission spectra resulting from the ultrasonic excitation were in agreement with that obtained by thermal excitation. The proposed technique was utilized to study different poly(dimethylsiloxane) samples having different viscosities.     

ON THE SUSTAINABLE GROWTH IN AN ECONOMY WITH PERFECTLY SUBSTITUTABLE EXHAUSTIBLE RESOURCES

Abstract A model of sustainable economic growth in an economy with two types of exhaustible resources is analyzed. The resources are assumed to be perfect substitutes with marginal rate of substitution varying over time. The optimal control framework is used to characterize the optimal paths under the maximin criterion. It is shown that the resource with increasing productivity is not used before the constant productivity resource is depleted. Afterwards the resource with an increasing productivity is asymptotically depleted as well. The results are based on an assumption that transversality conditions hold. A new sufficient condition for the transversality conditions is derived. Finally, an analogue of Hartwick’s rule for this non‐autonomous case is established.     

Effect of selected signals of interest on ultrasonic backscattering measurement in cancellous bones

This study examined how the signals of interest (SOI) effect on the backscattering measurement numerically based on 3-D finite-difference time-domain (FDTD) method. High resolution microstructure mappings of bovine cancellous bones provided by micro-CT were used as the input geometry for simulations. Backscatter coefficient (BSC), integrated backscatter coefficient (IBC) and apparent integrated backscatter (AIB) were calculated with changing the start (L1) and duration (L2) of the SOI. The results demonstrated that BSC and IBC decrease as L1 increases, and AIB decreases more rapidly as L1 increases. The backscattering parameters increase with fluctuations as a function of L2 when L2 is less than 6 mm. However, BSC and IBC change little as L2 continues to increase, while AIB slowly decreases as L2 continues to increase. The results showed how the selections of the SOI effect on the backscattering measurement. An explicit standard for SOI selection was proposed in this study and short L1 (about 1.5 mm) and appropriate L2 (6 mm-12 mm) were recommended for the calculations of backscattering parameters.     

Evaluation of the Mooney Viscosity of Natural Rubber by Near‐Infrared Spectroscopy

Abstract

The direct near‐infrared spectroscopic reflectance measurements of prevulcanized natural rubber (brown crepe) was employed for determination of its Mooney viscosity. NIR reflectance spectra were obtained for a total of 100 samples whose Mooney viscosity (VM in the range 68–95 units) have been determined by the standard reference procedure using a commercial computerized Mooney viscometer. These samples were employed as the raw material or were treated to achieve better homogenization. A Fourier transform near infrared (FT‐NIR) spectrophotometer was employed, and the reflectance spectra were obtained with resolution of 4 cm^?1 in the range 4000–10,000 cm^?1 as an average of 75 scans. The samples were split in a calibration set containing 70 samples and in an external validation set consisting of the remaining 30 samples. The calibration and validation spectra sets were treated to correct for baseline shift, further transformed by first derivative and finally modeled by partial least squares (PLS) employing four latent variables. The model was evaluated with the external sample test set, and a RMSEP of 3.6 and 3.9 units of Mooney viscosity were obtained for homogenized and nonhomogenized samples, respectively. The NIR method is capable of determining the Mooney viscosity in few minutes in the non‐pretreated sample with an error that is satisfactory for quality control of natural rubber destined for automobile tire manufacturing.     

Multiscale expansions in discrete world

In this paper, we show the attainability of KdV equation from some types of nonlinear Schrödinger equation by using multiscale expansions discretely. The power of this manageable method is confirmed by applying it to two selected nonlinear Schrödinger evolution equations. This approach can also be applied to other nonlinear discrete evolution equations. All the computations have been made with Maple computer packet program.     

金的化学状态对Au／CoCeOx催化剂CO氧化性能的影响

以CoCeOx复合氧化物为载体,采用沉积沉淀法制备了负载型的金催化剂,并通过不同温度的预处理控制Au的化学状态. 使用粉末X射线衍射、高分辨透射电子显微镜、程序升温还原和X射线光电子能谱对催化剂进行了表征,考察了在室温条件下该系列催化剂的一氧化碳氧化性能. 结果表明, Au/CoCeOx催化剂的CO氧化性能与催化剂表面Au 的含量成正比, Au 可能是反应的主要活性物种. 添加水汽对反应有一定的促进作用,但由于Au 不能稳定存在,特别是当催化剂表面Au 的含量过高时,在水汽的作用下Au 迅速发生歧化反应,使得催化剂的性能下降.     

Sub-optimal wavelet denoising of coaveraged spectra employing statistics from individual scans

This paper proposes a novel wavelet denoising method, which exploits the statistics of individual scans acquired in the course of a coaveraging process. The proposed method consists of shrinking the wavelet coefficients of the noisy signal by a factor that minimizes the expected square error with respect to the true signal. Since the true signal is not known, a sub-optimal estimate of the shrinking factor is calculated by using the sample statistics of the acquired scans. It is shown that such an estimate can be generated as the limit value of a recursive formulation. In a simulated example, the performance of the proposed method is seen to be equivalent to the best choice between hard and soft thresholding for different signal-to-noise ratios. Such a conclusion is also supported by an experimental investigation involving near-infrared (NIR) scans of a diesel sample. It is worth emphasizing that this experimental example concerns the removal of actual instrumental noise, in contrast to other case studies in the denoising literature, which usually present simulations with artificial noise. The simulated and experimental cases indicate that, in classic denoising based on wavelet coefficient thresholding, choosing between the hard and soft options is not straightforward and may lead to considerably different outcomes. By resorting to the proposed method, the analyst is not required to make such a critical decision in order to achieve appropriate results.