31P{1H}-n.m.r. as a tool for identification of ruthenium isomers containing PPh3 or 1,4-bis(diphenylphosphino)butane ligands. X-ray structures of the cis-{RuCl2(PPh3)2 [4,4′-(-X)2-2,2′-bipy]} complexes [X=-H, -Me, -SMe and (-Cl, -Me)]

A series of cis-{RuCl₂(PPh₃)₂[4,4-(X)₂-2,2-bipy]} [cis-chlorines; X=-H, -Me, -SMe, and (-Cl,-Me)] complexes have had their structures determined by single crystal X-ray diffraction. The geometry of these complexes, also determined in CH₂Cl₂ solution by ³¹P{¹H}-n.m.r. spectroscopy, showed that the chemical shifts for the phosphorus atoms are slightly dependent on the pKa of the 4,4-(-X)₂-2,2-bipy ligands.     

Synthesis, structure, and complexation of a large 28-mer macrocycle containing two binding sites for either anions or metal ions

The "one-pot" synthesis and characterization of a large 28-mer macrocycle (H(4)L(2)) with oxamido units capable of complexing guest ions through oxygen or nitrogen donor atoms is reported. Single-crystal structure determination of H(8)L(2)(NO(3))(4) and (Cu(2)[H(2)L(2)](H(2)O)(2))(NO(3))(2) demonstrated that the macrocycle contains two sites capable of complexing two nitrate anions or two copper(II) ions, involving a large structural reorganization in the conformation of the macrocyclic framework on coordination of the copper(II) ions when compared to the nitrate. Electrochemical and magnetic susceptibility measurements on the dinuclear Cu(II) complex and the related mononuclear and trinuclear Cu(II) complexes derived from the related 14-mer macrocycle were carried out and illustrate the role of the oxamido groups in mediating metal-metal interaction and delocalization.     

A new steroidal saponin from Agave attenuata

A new steroidal saponin was isolated from the leaves of Agave attenuata. Its structure was established as (3beta,beta,25S)-spirostan-3-yl O-beta-D-glucopyranosyl-(1 --> 2)-beta-D-glucopyranosyl-(1 --> 2)-O-[beta-D-glucopyranosyl-(1 --> 3)]-beta-D-glucopyranosyl-(1 --> 4)-beta-D-galactopyranoside. The structural identification was performed using detailed analyses of 1H- and 13C-NMR spectra including 2D NMR spectroscopic techniques (COSY, HETCOR, and COLOC) and chemical conversions. The hemolytic activity of the steroidal saponin was evaluated using an in vitro assay.     

Titanium as a chemical modifier for the determination of cobalt in marine sediments

The determination of cobalt in marine sediments by electrothermal atomic absorption spectrometry was studied using no modifier and magnesium and titanium as modifiers. Titanium is one of the major sediment constituents, which widely affects the cobalt determination and it was studied as a chemical modifier since it was the only concomitant that increased the cobalt signal in the concentration range usually found in sediments. The performance of Mg and Ti as chemical modifiers was compared relative to maximum pyrolysis and atomization temperatures, linear calibration range, sensitivity and matrix effects. The pyrolysis curves showed that the analyte could be stabilized up to 1400 °C when either Ti or Mg(NO₃)₂ was present, while only 1000 °C could be used in the absence of a modifier. The optimum atomization temperature was 2500 °C in all cases. Analytical curves were compared using no modifier, 5 μg Ti and 100 μg Mg(NO₃)₂ as modifiers, and the linear range found was up to approximately 4 ng Co whether a modifier was used or not. With Ti as a chemical modifier, analytical curves for cobalt in aqueous solution and in a synthetic matrix resulted in the same sensitivity (m₀=55 pg), whereas the use of Mg led to characteristic mass values of 59 and 72 pg in aqueous solution and in a synthetic matrix, respectively, showing some matrix effect. The detection limits (3σ, n=10) were 0.4 μg g⁻¹ using no modifier and 0.3 μg g⁻¹ with Ti as a modifier in the original matrix. A reference estuarine sediment NIST 1646 with a non-certified content of 10.5 μg g⁻¹ Co was analyzed and the found value of 10.9±2.4 μg g⁻¹, (n=3), using Ti as chemical modifier and calibration against aqueous standards, was in good agreement with the recommended value.     

EPR spectroscopy on irradiated nickel tetracyanide in NaCl host lattice: mechanism for the simultaneous formation of reduced and oxidized species

The kinetics of oxidized and reduced Ni²⁺ complexes produced by X-ray irradiation on single crystals of NaCl doped with [Ni(CN)₄]²⁻ is studied by Electron Paramagnetic Resonance at room temperature. The interdependent generation of these two complexes is attributed to migration of the charge compensating vacancy from the reduced to the oxidized complex in a reversible reaction. At higher X-ray doses, there is a predominant formation of the reduced complex.     

Mechanism for basic hydrolysis of N-nitrosoguanidines in aqueous solution

A kinetic study was carried out on the hydrolysis of two N-nitrosoguanidines, 1-nitroso-1-methyl-3-tolylsulfonylguanidine (TSGNO) and 1-nitroso-1-methyl-3-benzoylguanidine (BCGNO). We observed an absence of buffer catalysis using H(2)PO(4)(-)/HPO(4)(2)(-), H(3)BO(3)/H(2)BO(3)(-), and HCO(3)(-)/CO(3)(2)(-) regulators and a complex dependency of the rate constant on the pH. We discovered the existence of three simultaneous reaction paths: spontaneous decomposition of the neutral form of the N-nitrosoguanidine, decomposition of the monoanion, and decomposition through the form of the dianion. The analysis of the kinetic data has allowed us to obtain the acidity constant for the formation of the monoanion of the N-nitrosoguanidine, with values of p = 11.5. The reaction rate for the process through the monoanion, k(2), decreases as the acidity increases. The application of the principle of nonperfect synchronization shows that the basicity and reactivity do not correlate when there exists a possibility of stabilization of the negative charge by resonance. This behavior is consistent with the mechanism E1cB whereby the stabler the negative charge, the slower the elimination reaction. When dealing with the case of the elimination through the neutral form we observe that the reaction rate increases together with the capacity of stabilization of the positive charge on the nitrogen atom adjacent to the imino group. For the reaction through the dianion we used a maximum value of k(3) = 10(10) s(-)(1) to estimate the value of p for the formation of the dianion of the N-nitrosoguanidine, obtaining values of p < 24.     

Discovery of a small molecule that inhibits the interaction of anthrax edema factor with its cellular activator, calmodulin

The catalytic efficiency of adenylyl cyclase activity of edema factor (EF) from Bacillus anthracis is enhanced by approximately 1000-fold upon its binding to mammalian protein calmodulin (CaM). A tandem cell-based and protein binding-based screen of a 10,000 member library identified a molecule that inhibits the EF-CaM interaction and therefore the adenylyl cyclase activity. A combination of fluorescence spectroscopy and photolabeling studies showed that the molecule targets the CaM binding region of EF. A series of related compounds were synthesized and evaluated to identify one compound, 4-[4-(4-nitrophenyl)-thiazolylamino]-benzenesulfonamide, that maintained activity against EF but showed minimal toxicity to two cultured cell lines. This compound represents an important reagent to study the role of EF in anthrax pathology and may represent a drug lead against anthrax infection.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

Fragmentation and reaction processes in cluster-surface collisions

We review the processes which have been observed from collisions between alkali-halide clusters and solid surfaces. Soft impact of nanocrystalline Na_nF _n?1 ⁺ clusters against solid surfaces causes them to cleave along the lowest energy (100) plane. At higher collision energies (E_i>1 eV/atom), an evaporative cascade occurs which is characteristic of a transformation of the nanocrystal to a molten state. Efficient F^? transfer from the cluster to the surface can occur for the larger clusters (>60 atoms) scattering from Si(111), in direct competition with the cleaving channel at low energies. In this regime, strong bonds can form between the F^? and silicon surface. The reaction probability increases with cluster size indicating that an impact-initiated shock wave is needed to enhance the reactive process.     

Rapid qualitative analysis of metallic alloys by electrospot chromatography

Summary Electrography and paper chromatography were combined to analyse rapidly metallic alloys in an almost non destructive technique. Using anodic dissolution the sample is applied on the start point of the chromatographic paper. Known ketones-HCl-water mixtures are usually used as solvents to analyse electrospots of different alloys and metal coatings and a separate electrospottest is recommended for Cr. Results of qualitative analysis of some steels, Cu–Ni, and Pb alloys are presented.