New Layered Double Hydroxide, Zn–Ti LDH : Preparation and Intercalation Reactions

The layered double hydroxide (LDH) well known for its abilityto intercalate anionic compounds has been prepared conventionallyonly with bivalent and trivalent cations. In this study, Zn–Ti LDH consisting of bivalent and tetravalent cations was prepared, andreacted with organic monocarboxylic, dicarboxylic and aromatic acidsat high or room temperature. XRD patterns of the prepared LDH(Zn–Ti-CO₃) showed that interlayer spacing of the LDH was 0.67 nm. The value was small compared to the usual LDH (Zn–Al–CO₃)of 0.76 nm in the case of carbonate anion as the guest. Also, DTA,TG and DTG analysis indicated that the electrostatic force betweenthe layers and carbonate anions increased where the carbonate anionsin Zn–Ti LDH decomposed at 255 °C while those inZn–Al–CO₃ decomposed at 230–240 °C.     

Adsorption Characteristics of Pb(II) and Cr(III) onto C‐4‐Methoxyphenylcalix[4]Resorcinarene in Batch and Fixed Bed Column Systems

A study on the adsorption characteristics of Pb(II) and Cr(III) cations onto C‐4‐methoxyphenylcalix‐[4]resorcinarene (CMPCR) in batch and fixed bed column systems has been conducted. CMPCR was produced by one step synthesis from resorcinol, 4‐methoxybenzaldehyde, and HCl. The synthesis was carried out at 78 °C for 24 hours and afforded the adsorbent in 85.7% as a 3:2 mixture of C_4ν:C_2ν isomer. Most parameters in batch and fixed bed column systems confirm that CMPCR is a good adsorbent for Pb(II) and Cr(III), though Pb(II) adsorption was more favorable than that of Cr(III). The adsorption kinetic of Pb(II) and Cr(III) adsorptions in batch and fixed bed column systems followed a pseudo 2ⁿ order kinetics model. The rate constant of Pb(II) was higher than that of Cr(III) in the batch system, but this result was contrary to the result obtained in a fixed bed column system. Desorption studies to recover the adsorbed Pb(II) and Cr(III) were performed sequentially with distilled water and HCl, and the results showed that the adsorption was dominated by chemisorption.     

Tetragonal nanocrystals from the Zr0.5Ce0.5O2 solid solution by hydrothermal method

The formation of tetragonal Zr(0.5)Ce(0.5)O(2) solid solution nanocrystallites of 5 +/- 1 nm size by a hydrothermal method at 120 degrees C for 6 h was confirmed by careful Raman and XRD studies for the first time. It was characterized as the t' '-form with an axial ratio of c/a = 1 but with oxygen ion displacements. The as-prepared sample was hydrous in nature, which is responsible for the lattice expansion. However, most of the water held in the structure can be expelled by heating the sample above 600 degrees C. Above 1050 +/- 50 degrees C the t' '-form of tetragonal Zr(0.5)Ce(0.5)O(2) solid solution dissociates into two phases, cubic phase and the t-form of tetragonal phases.     

Antimicrobial and anticancer activities of Schiff base ligand and its transition metal mixed ligand complexes with heterocyclic base

A new Schiff base ligand (HL) was prepared via a condensation reaction of quinoline‐2‐carboxaldhyde with 2‐aminophenol in a molar ratio of 1:1. Its transition metal mixed ligand complexes with 1,10‐phenanthroline (1,10‐phen) as co‐ligand were also synthesized in a 1:1:1 ratio. HL and its mixed ligand complexes were characterized using elemental analysis, infrared, ¹H NMR, mass and UV–visible spectroscopies, molar conductance, magnetic measurements, solid reflectance, thermal analysis, electron spin resonance and X‐ray diffraction. Molar conductance measurements showed that all complexes have an electrolytic nature, except Cd(II) complex. From elemental and spectral data, the formulae [M(L)(1,10‐phen)(H₂O)]Cl_x?nH₂O (where M = Cr(III) (x = n = 2), Mn(II) and Ni(II) (x = 1, n = 2), Fe(III) (x = n = 2), Co(II), Cu(II) and Zn(II) (x = 1, n = 2)) and [Cd(L)(1,10‐phen)Cl]?3H₂O for the metal complexes have been proposed. The geometric structures of complexes were found to be octahedral. Powder X‐ray diffraction reflected the crystalline nature of the complexes; however, the Schiff base is amorphous. HL and its mixed ligand complexes were screened against Gram‐positive bacteria (Streptococcus pneumoniae and Bacillus subtilis) and Gram‐negative bacteria (Pseudomonas aeruginosa and Escherichia coli). Antifungal activity was determined against Aspergillus fumigatus and Candida albicans, the data showing that most complexes had activity less than that of the Schiff base while Mn(II), Fe(III) and Ni(II) complexes showed no significant antifungal activity. The anticancer activity of HL and its metal complexes was also studied against breast and colon cell lines. The metal complexes showed IC₅₀ higher than that of HL, especially the Cu(II) complex which showed the highest IC₅₀ against breast cell line.     

Aminomethyl Transfer (Mannich) Reactions Between an O-Triethylsilylated Hemiaminal and Anilines,RnC6H5−nNH2 Leading to New Diamines,Triamines, Imines,or 1,3,5-Triazines Dependent upon Substituent R

The reactions of the Mannich reagent Et₃SiOCH₂NMe₂ ( 1 ) with a variety of anilines (mono-substituted RC₆H₄NH₂, R=H, 4-CN, 4-NO₂, 4-Ph, 4-Me, 4-MeO, 4-Me₂N; di-substituted R₂C₆H₃NH₂, R₂=3,5-(CH₃)₂, 3,5-(CF₃)₂; tri-substituted R₃C₆H₂NH₂, R₃=3,5-Me₂-4-Br and a “super bulky” aniline (Ar*NH₂) [Ar*=2,6-bis(diphenylmethyl)-4-tert-butylphenyl]) led to the formation of a range of products dependent upon the substituent. With electron-withdrawing substituents, previously unknown diamines, RC₆H₄NH(CH₂NMe₂) [R=CN ( 2 a ), NO₂ ( 2 b )] and R₂C₆H₃NH(CH₂NMe₂) [R₂=3,5-(CF₃)₂ ( 2 c) ] were formed. Further reaction of 2 a , b , c with 1 yielded the corresponding triamines RC₆H₄N(CH₂NMe₂)₂ (R=CN ( 3 a ), NO₂ ( 3 b ) and R₂C₆H₃N(CH₂NMe₂)₂, R₂=3,5-(CF₃)₂ ( 3 c ). The new polyamines were characterized by NMR spectroscopy, and for 2 a , 2 c _, and 3 c , by single crystal XRD. In the case of electron-donating groups, R=4-OMe, 4-NMe₂, 4-Me, 3,5-Me₂, 3,5-Me₂-4-Br, and for R=4-Ph, the reactions with 1 immediately led to the formation of the related 1,3,5-triazines, R=4-MeO ( 5 a ), 4-Me₂N ( 5 b ), 4-Me ( 5 c ), 3,5-Me₂ ( 5 d ), 3,5-Me₂-4-Br ( 5 e ), 4-Ph ( 5 f ), 4-Cl ( 5 g ). The “super bulky” aniline rapidly produced a single product, namely the corresponding imine Ar*N=CH₂ ( 4 ) which was also characterized by single crystal XRD. Imine 4 is both thermally and oxidatively stable. All reactions are very fast, thus based upon the presence of Si we are tempted to denote the reactions of 1 as examples of “Silick” chemistry.     

Buprofezin dissipation and safety assessment in open field cabbage and cauliflower using GC/ITMS employing an analyte protectant

An analytical method for the determination of buprofezin residues in cabbage and cauliflower was developed and validated using gas chromatography with ion trap mass spectrometry. The analyte protectant d ‐sorbitol was used at a concentration level of 0.5 mg mL^?1 in acetonitrile instead of in matrix for constructing the calibration curves of the buprofezin standard. The average recoveries ranged from 91.3 to 96.8%, with an RSD of ≤2.7%. The limits of detection and quantitation of the method in cabbage and cauliflower were 1.3, 1.7 and 4.3, 6.2 μg kg^?1, respectively. The residual levels and dissipation kinetics of buprofezin 25% wettabe powder in cabbage and cauliflower cultivated under open field conditions was investigated at the single (T1) and double (T2) recommended rates of application. Half‐life periods were found to be 1.73 and 2.1 days in cabbage, whereas in cauliflower, these values were 1.85 and 2.36 days at T1 and T2, respectively. Based on the dissipation study, and the maximum residue limit value of 0.05 mg kg^?1, the proposed pre‐harvest interval of buprofezin in cabbage was 3–6 days and that in cauliflower was 4–10 days. The results showed that buprofezin is safe for application at both recommended application rates.     

Validated ecofriendly chromatographic method for quantitative determination of anti‐migraine quaternary mixture

A novel ecofriendly, cost and time saving high‐performance thin‐layer chromatographic method was developed and validated for simultaneous determination of metoclopramide, ergotamine, caffeine, and paracetamol in bulk and pharmaceutical formulation. The separation was carried out on silica gel plates, using ethyl acetate:ethanol:ammonia (9:1:0.1, v/v/v) as a developing system. Ultraviolet detection was carried out at 272 nm. The resulting retention times were 0.15, 0.36, 0.49, and 0.74 min for metoclopramide, ergotamine, caffeine, and paracetamol, respectively. The greenness profile assessment was achieved to the proposed method to evaluate its greenness characters to the environment with acceptable results. Validation parameters were checked according to International Conference of Harmonization guidelines to achieve the international requirements for quality control analysis of the proposed drugs.