A comparative study for elastic electron collisions on the isoelectronic CNN, NCN, and CCO radicals

In this work, we present a theoretical study on elastic electron collisions from three isoelectronic free radicals (CNN, NCN, and CCO) in the low incident energy range. More specifically, calculated differential, integral, and momentum transfer cross sections are reported in the 1-30 eV energy range. Calculations are performed in the static-exchange and static-exchange-polarization levels. The iterative Schwinger variational method is used to solve the scattering equations. Our study reveals that the calculated cross sections for the three targets are significantly different at incident energies below 10 eV. Above that energy, a remarkable similarity among the calculated results is seen.     

Discrimination between ethanol inhibition models in a continuous alcoholic fermentation process using flocculating yeast

Discrimination between different rival models for describing the inhibitory effect of ethanol both on yeast growth and on fermentation was studied for a continuous process of alcoholic fermentation in a tower reactor with recycling of flocculating cells. Models tested include linear, parabolic, hyperbolic, exponential, and generalized nonlinear power-law types. The best expressions were identified under the criteria that all the kinetic parameters should assume acceptable values in a feasible range and should result in the best fit of the experimental data. The kinetic parameters were estimated from steady-state data of several sugar concentrations in feeding stream (S₀ = 160, 170, 180, 190, 200 g/L), constant dilution rate (D = 0.2 h^-1), recycle ratio (α = 13.6), and temperature (T = 30°C). The best model for the yeast growth was of power-law type, whereas for the product formation the best model was of linear type. These models were able to reproduce the trends of the process variables satisfactorily.     

Fluorescence study of the interaction between metal ions and methyl methacrylate–methacrylic acid copolymers in aqueous solutions: thallium(I), calcium(II), and terbium(III)

 The binding of the cations thallium(I), calcium(II) and terbium(III) to methyl methacrylate– methacrylic acid copolymers with different fractions of acid groups (x) has been studied in aqueous solution at various pH values using the fluorescence of covalently bonded 9-vinyl anthracene as a probe. In all cases, the extent of binding increases as a function of the charge of the polymer with either increasing fraction of carboxylic acids or of pH. However, differences are observed in the behavior of the three cations. With Tl(I), quenching of the anthracene group fluorescence is observed, indicating that the thallium(I) approaches the probe and suggesting that the alkylanthracene is probably in a relatively polar region. Binding constants have been determined from anthracene quenching data and from studies with the fluo-rescent-probe sodium pyrenetetra-sulfonate. Good agreement is obtained between the two methods, and values for the binding constants increase from 250 to 950 M^-1 as x increases from 0.39 to 1. It is suggested that the cation is held in the polyelectrolyte domain, partly by Debye–Hückel effects and partly by more specific interactions. Stronger binding is found with calcium(II) and terbium(III), and in this case increases in fluorescence intensity are observed on complexation due to the anthracene group being in a more hydrophobic region, probably as a result of conformational changes in the polymer chain. In the former case the stoichiometry of the interaction was determined from the fluorescence data to involve two carboxylate groups bound per calcium. Association constants were found using murexide as an indicator of free calcium to vary from 8400 to 37 000 M^-1 as x increases from 0.39 to 1. It is suggested that in this case specific calcium(II)–carboxylate interactions contribute to the binding. With terbium(III), a greater increase in the probe fluorescence intensity was observed than with calcium, and it is suggested that the interaction with the polymer is even stronger, leading to a more pronounced conformational change in the polymer. It is proposed that the terbium(III) interacts with six carboxylic groups on the polymer chain, with three being coordinated and three attracted by electrostatic interactions. Received: 10 June 1997 Accepted: 24 October 1997     

Phosphorus determination in milk and bone samples by neutron activation analysis

The determination of phosphorus in milk and bone samples by both radiochemical and instrumental neutron activation analysis is described. The radiochemical method consists of thermal neutron irradiation of samples and standards, sample dissolution, phosphorus precipitation as ammonium phosphomolyb-date, use of zinc holdback carrier and counting of the phosphorus-32 ß-activity. The instrumental method involves thermal neutron irradiation of samples and standards, waiting for a decay time and ß-counting. The methods were applied to commercial samples and reference materials.     

SFE of rosemary oil: Assessment of the influence of process variables and extract characterization

The effects of temperature and solvent density on the characteristics of the extracts obtained from supercritical fluid extraction (SFE) of the volatile compounds from Brazilian rosemary (Rosamarinus officianalis L., Labiatae) using carbon dioxide (CO₂) as solvent were investigated. The experiments were performed in a semi-batch laboratory scale home-made unit at two temperatures, viz. 310.15 and 320.15 K, over the pressure range of 100-160 bar. This study allowed to determine the crossover point and the maximum solubility of the oil. The products were analyzed by HRGC-MS, and compounds grouped in three different classes according to their molecular mass distribution in order to evaluate the influence of the variables studied on the characteristics of the extracts. The model proposed by Sovová was adopted in an attempt to interpret the mass transfer phenomena in the extraction process.     

Antibody-recruiting protein-catalyzed capture agents to combat antibiotic-resistant bacteria

Antibiotic resistant infections are projected to cause over 10 million deaths by 2050, yet the development of new antibiotics has slowed. This points to an urgent need for methodologies for the rapid development of antibiotics against emerging drug resistant pathogens. We report on a generalizable combined computational and synthetic approach, called antibody-recruiting protein-catalyzed capture agents (AR-PCCs), to address this challenge. We applied the combinatorial protein catalyzed capture agent (PCC) technology to identify macrocyclic peptide ligands against highly conserved surface protein epitopes of carbapenem-resistant Klebsiella pneumoniae, an opportunistic Gram-negative pathogen with drug resistant strains. Multi-omic data combined with bioinformatic analyses identified epitopes of the highly expressed MrkA surface protein of K. pneumoniae for targeting in PCC screens. The top-performing ligand exhibited high-affinity (EC₅₀ ∼50 nM) to full-length MrkA, and selectively bound to MrkA-expressing K. pneumoniae, but not to other pathogenic bacterial species. AR-PCCs that bear a hapten moiety promoted antibody recruitment to K. pneumoniae, leading to enhanced phagocytosis and phagocytic killing by macrophages. The rapid development of this highly targeted antibiotic implies that the integrated computational and synthetic toolkit described here can be used for the accelerated production of antibiotics against drug resistant bacteria.

Antibody-recruiting protein-catalyzed capture agent (AR-PCCs) are a new class of all-synthetic and highly targeted antibiotics that recruit endogenous immune responses to eliminate drug-resistant microbes.     

Alkaloid production by callous tissue cultures of Cereus peruvianus (Cactaceae)

The morphologically undifferentiated cells of nonregenerant callous tissue of Cereus peruvianus cultured in the original medium and in medium supplemented with tyrosine were used as an alkaloid source. Comparison of alkaloid production by C. peruvianus plants and by callous tissues indicated that alkaloid levels were almost twice as high in callous tissues as in shoots of C. peruvianus plants. The ratio of alkaloid concentration between mature plant and morphologically und ifferentiated cells of callous tissue was 1∶1.7. A relationship between culture medium containing tyrosine and alkaloid production was also observed in the callous tissues of C. peruvianus. Since increased alkaloid production may be induced by additional factors such as tyrosine, increasing levels of tyrosine or other conditions of the culture medium may be considered factors for inducing higher alkaloid production by C. peruvianus callous tissues.     

Silylating Agents Grafted onto Silica Derived from Leached Chrysotile

Silica from leached chrysotile fibers (SILO) was silanized with trialkoxyaminosilanes to yield inorganic–organic hybrids designated SILx (x=1–3). The greatest amounts of the immobilized agents were quantified as 2.14, 1.90, and 2.18 mmol g⁻¹ on SIL1, SIL2, and SIL3 for –(CH₂)₃NH₂,–(CH₂)₃NH(CH₂)₂NH₂, and –(CH₂)₃NH(CH₂)₂NH(CH₂)₂NH₂ groups attached to the inorganic support. The infrared spectra for all modified silicas showed the absence of the Si–OH deformation mode, originally found at 950 cm⁻¹, and the appearance of asymmetric and symmetric C–H stretching bands at 2950 and 2840 cm⁻¹. Other important bands associated with the organic moieties were assigned to ν_as(NH) at 3478 and ν_sym(NH) at 3418 cm⁻¹. The NMR spectrum of the solid precursor material suggested two different kinds of silicon atoms: silanol and siloxane groups, between −90 and 110 ppm; however, additional species of silicon that contain the organic moieties bonded to silicon at −58 and −66 ppm appeared after chemical modification. These modified silicas showed a high adsorption capacity for cobalt and copper cations in aqueous solution, in contrast to the original SILO matrix, confirming the unequivocal anchoring of silylating agents on the silica surface.     

The influence of preparation method of OC1OC6-PPV films on the photo-oxidation process

Poly(p-phenylene vinylene) (PPV) derivatives are well known for their applications in polymer light emitting diodes (PLEDs). PPV derivatives are highly susceptible to photo-oxidation though, which is mainly caused by the scission of the vinyl double bond on the polymer backbone. In this work, we show that Langmuir-Blodgett (LB) films are less degraded than cast films of a PPV derivative (OC₁OC₆-PPV). Both films had similar thickness (∼50 nm) to allow for a more realistic comparison. Degradation was monitored with UV-vis and FTIR spectroscopies. The results indicated that cast films were completely degraded in ca. 400 min, while LB took longer time, i.e. about four times the values for the cast films. The differences can be attributed to the more compact morphology in the LB than in the cast films. With a compact morphology the diffusion of oxygen in the LB film is hampered and this causes a delay in the degradation process.