Complex forming and extraction properties of oligo benzo-fused crown ethers

The complex forming properties with alkali metal and ammonium ions of a series of oligo benzo-condensed 18-crown-6 ethers1–8 having a different gradation of lipophilicity and of molecular rigidity are investigated by voltammetry at the interface of two immiscible electrolyte solutions (ITIES) and by a liquid-liquid extraction technique. The experimental results obtained in the two phase system H₂O/nitrobenzene are discussed in relation to the structure of the crown and the cation type. The stability constants for the 1 : 1 complexes of Na⁺, K⁺, Rb⁺, Cs⁺ and NH ₄ ⁺ in nitrobenzene have been determined and compared with the extraction constants for the 1: 1 complexes of Na⁺ and K⁺ and for the 1 : 1 and 1 : 2 complexes of Cs⁺, showing the effect of oligo benzo condensation for the 18-crown-6 system.     

Morphogenetic control of calcite crystal growth in sulfonic acid based hydrogels

In this paper the mineralization of CaCO(3) in various hydrogel matrices is presented. Sulfonic acid based hydrogels were prepared by introduction of sulfonate-containing monomers into a polyacrylamide network. The sulfonate content of polyacrylamide-co-vinylsulfonate and polyacrylamide-co-allylsulfonate decreases during elution of the copolymers in demineralized water, indicating insufficient linking of the sulfonate-bearing monomers within the hydrogel. In contrast to this, acrylamidomethylpropanesulfonate (AMPS) effectively copolymerizes with acrylamide (AAm) monomers. To study the influence of spatial arrangement of ionic functional groups within hydrogel networks on the mineralization of CaCO(3), AMPS copolymers with different degrees of AMPS cross-linking were synthesized. For the mineralization experiments the copolymers were placed into a double-diffusion arrangement. Calcite as the thermodynamically stable modification of CaCO(3) was obtained with a particular morphology. The pseudocubic habitus resembles aggregates obtained by mineralization in pure polyacrylamide. However, closer examination of the aggregates by scanning electron microscopy (SEM) shows that the crystal growth in the AMPS copolymers is different from that observed in polyacrylamide. Whereas the morphology of the calcite aggregates could be fine-tuned by using copolymers with different sulfonate content, the spatial distribution of the ionic functional groups alters the course of crystallization. Calcium ions are locally accumulated due to the heterogeneous distribution of functional sulfonate groups within the copolymer network. Thereby the nucleation of calcite is triggered, resulting in enhanced mineralization.     

Mechanistic pathways of the hydroxyl radical reactions of quinoline. 2. Computational analysis of hydroxyl radical attack at C atoms

Density functional theory (DFT) calculations are employed to compare the mechanism of the *OH attacks at all carbon atoms in quinoline. The computational analysis of the energy surface for the reaction of *OH with quinoline reveals that the formation of OH adducts proceeds through exothermic formation of pi-complexes/H-bonded complexes. The gas-phase reactions have activation energies ranging from <1.3 kcal/mol for the attack at positions C3 through C8 to 8.6 kcal/mol for the attack at the C2 position. Solvation, as described by the CPCM cavity model, lowers these activation barriers so that the attack at all carbon atoms except C2 is effectively barrierless. The *OH attack at C2 in solution is significantly different than at all other quinoline positions because it involves the only transition structure with energy higher than that of the starting materials and with an energetic barrier of 5.1 kcal/mol. The specific solvation approach also corroborates this finding because the attack at C2 was shown to have an energy barrier of 2.3 kcal/mol compared to the barrierless attack at C5. These results are in agreement with our recent experimental studies but differ from literature reports on the degradation of quinoline using the photo-Fenton reaction.     

Synthese,Kristallstruktur und spektroskopische Charakterisierung von [Au12(PPh)2(P2Ph2)2(dppm)4Cl2]Cl2

Synthesis, Crystal Structure and Spectroscopic Characterization of [Au₁₂(PPh)₂(P₂Ph₂)₂(dppm)₄Cl₂]Cl₂ The reaction of [(AuCl)₂dppm] (dppm = Ph₂PCH₂PPh₂) with P(Ph)(SiMe₃)₂ in CHCl₃ results in the formation of [Au₁₂(PPh)₂(P₂Ph₂)₂(dppm)₄Cl₂]Cl₂ ( 1 ), the crystal structure of which was determined by single crystal X‐ray analysis (space group P2₁/c, a = 1425.3(3) pm, b = 2803.7(6) pm, c = 2255.0(5) pm, β = 95.00(3)°, V = 8977(3)·10⁶ pm³, Z = 2). The dication in 1 consists of two Au₆P₃ units built by highly distorted Au₃P and Au₂P₂ heterotetrahedra, connected via four bidentate phosphine ligands. Additionally, the compound was characterized by IR‐, UV‐ and NMR spectroscopy. The ³¹P{¹H} NMR spectrum is discussed in detail.     

Synthese und Charakterisierung von Aquapentachloroplatinaten(IV) – Struktur von [K(18-Krone-6)][PtCl5(H2O)]

Synthesis and Characterization of Aquapentachloroplatinates(IV) – Structure of [K(18-crown-6)][PtCl₅(H₂O)] The crown ether complex of the aquapentachloroplatinic acid of the composition [H₁₃O₆][PtCl₅(H₄O₂)] · 2(18-cr-6) ( 2 ) reacts with K₂CO₃ and [NⁿBu₄]OH in aqueous solution to give [K(18-cr-6)][PtCl₅(H₂O)] ( 5 a ) and [NⁿBu₄][PtCl₅(H₂O)] · ¹/₂ (18-cr-6) · H₂O ( 5 b ), respectively. Both compounds were characterized by microanalysis, vibrational (IR, Raman) and NMR (¹H, ¹³C, ¹⁹⁵Pt) spectroscopy. The X-ray structure analysis of 5 a (orthorhombic, pnma; a = 16,550(4), b = 18,044(3), c = 7,415(1) Å; Z = 4; R1 = 0,0183; wR2 = 0,0414) reveals that the crystal is threaded by chains built up of [PtCl₅(H₂O)]^? and [K(18-cr-6)]⁺ units. There are tight K …? Cl contacts (d(K? Cl1)) = 3,0881(9) Å and O_W? H? O_cr hydrogen bridges (d(O1 …? O2) = 2,806(3) Å) between these units. The coordination polyhedron [PtCl₅O] has approximately C_4v symmetry.     

Metal- and ligand-directed one-pot syntheses,crystal structures,and properties of novel oxo-centered tetra- and hexametallic clusters

Starting from closely related metal-ligand combinations, completely different oligomeric metal clusters are synthesized. Whereas, picoline-tetrazolylamide HL(1) (1) and zinc or nickel acetate afforded [2x2] grids [M(4)(L(1))(8)] (2), slightly different N-(2-methylthiazole-5-yl)-thiazole-2-carboxamide HL(2) (5 a) and nickel acetate yielded the monometallic complex [Ni(L(2))(2)(OH(2))(2)] (6). In contrast, reaction of 5 a with zinc acetate produced the tetrametallic zinc cluster [Zn(4)O(L(2))(4)(OAc)(2)] (7). Even more surprising, when 3-methyl-substituted HL(3) (5 b) instead of 2-methyl-substituted HL(2) (5 a) was allowed to react under identical conditions with zinc acetate, the cluster [Zn(4)O(L(3))(4)Cl(2)] (8) crystallized from dichloromethane. Clusters 7 and 8 are isostructural. As for 7, in 8 two of the edges of the tetrahedron of zinc ions are doubly bridged, two are singly bridged, and the other two are nonbridged. On the other hand, when iron(II) acetate under aerobic conditions was allowed to react with 5 a, the unprecedented complex [[Fe(3)O(L(2))(2)(OAc)(4)](2)O] (9) was isolated. Cluster 9 is composed of two trimetallic, triangular mu(3)-O(2-)-centered [Fe(3)O(L(2))(2)(OAc)(4)](+) modules, linked by an almost linear mu(2)-O(2-) bridge. The M?ssbauer spectrum together with cyclic voltammetric and square-wave voltammetric measurements of 9 are reported, and 6-9 were characterized unequivocally by single-crystal X-ray structure analyses.     

Modelling of polymer aggregates in solution

The self-consistent mean field model of Scheutjens and Fleer is used to model spherical aggregates of homopolymers and monomer—polymer particles in solution. For homopolymer aggregates we found that the chain ends are preferentially located at the exterior side of the polymer/solvent interface. The distribution of the end segments may be an important parameter in latex film formation. For monomer—polymer particles a “core-shell” structure is found with an extended core containing a monomer—polymer mixture and a thin shell a few nanometres thick strongly enriched with monomer. The monomer-enriched shell seems to function as a solvating envelope for the dangling chain ends. These results are compared with other simulations based on a single chain in a spherical-cavity model.     

Design, synthesis, and evaluation of a biomimetic artificial photolyase model

Two new artificial photolyase models that recognize pyrimidine dimers in protic and aprotic organic solvents as well as in water through a combination of charge and hydrogen-bonding interactions and use a mimic of the flavine to achieve repair through reductive photoinduced electron transfer are presented. Fluorescence and NMR titration studies show that it forms a 1:1 complex with pyrimidine dimers with binding constants of approximately 10(3) M(-1) in acetonitrile or methanol, while binding constants in water at pH 7.2 are slightly lower. Excitation of the complex with visible light leads to clean and rapid cycloreversion of the pyrimidine dimer through photoinduced electron transfer catalysis. The reaction in water is significantly faster than in organic solvents. The reaction slows down at higher conversions due to product inhibition.     

Thermodynamic excess properties of alkanol + amine mixtures and application of the ERAS model

New experimental data of the molar excess volume V ^E of the mixtures ethanol/n-butylamine, heptanol/n-butylamine, n-propanol/dibutylamine have been obtained using the technique of the vibrating tube densitometer. Together with the data for the molar excess enthalpy H ^E from the literature, the V ^E data have been used for testing the applicability of the socalled ERAS model which accounts for hydrogen bonding effects as well as for free volume effects in associating mixtures. The results obtained by adjusting the model parameters reveal a strong cross association between the unlike molecules in the mixture resulting from strong negative values for the hydrogen bonding energy and the hydrogen bonding volume.Communicated at the Festsymposium celebrating Dr. Henry V. Kehiaian's 60^th birthday, Clermont-Ferrand, France, 17–18 May 1990.