Efficient routes to optically active azido-, amino-, di-azido- and di-amino-cyclitols with chiro- and allo-configuration from myo-inositol

Efficient routes to hitherto unknown 1d-2,5-di-azido-di-deoxy-allo-inositol, 1d-2,5-di-amino-di-deoxy-allo-inositol, 1l-1-azido-1-deoxy-chiro-inositol and 1l-1-amino-1-deoxy-chiro-inositol were developed by using cheaply available myo-inositol as the starting material. Preliminary investigations on the enzyme inhibitory properties were done. The methodology reported is amenable to gram scale synthesis and thus can find application in natural product synthesis.     

Simultaneous determination of hypoxanthine,inosine, inosine-5′-phosphate and adenosine-5′-phosphate with a multielectrode enzyme sensor

A multielectrode enzyme sensor for the simultaneous determination of adenosine-5′-phosphate (AMP), inosine-5′-phosphate (IMP), inosine (HXR) and hypoxanthine (HX)in fish meat was developed by assembling four enzyme sensors for AMP, IMP, HXR and HX in a flow cell. These compounds were determined from oxygen consumption according to the following reactions: AMP $\text{AD}$ IMP $\text{NT}$ HXR $\text{NP, PO}{}^{\mathrm{3?}}{}_4$ HX $\text{XO, O}{}_2$ Uric acid where AD is AMP deaminase, NT is 5′-nucleotidase, NP is nucleoside phosphorylase and XO is xanthine oxidase. Enzymes were covalently bound to a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. Sensors for HX, HXR, IMP and AMP were prepared by attaching membranes of XO, XONP, XO NPNT, and of XONPNT and AD, respectively, to four oxygen electrodes. Samples extracted from sea bass, bream, flounder, abalone and arkshell were analyzed within 5 min, from the simultaneous response curves of the four electrodes. Results obtained by the multisensor system were in good agreement with those determined by each single electrode.     

Measurement of regional cerebral blood flow by 133Xe inhalation method in patients with ruptured aneurysm

Regional cerebral blood flow (rCBF) was measured in 20 patients with ruptured aneurysm. rCBF images are obtained by 133Xe inhalation method using a ring type gamma camera (SET-020, Shimazu Co.) with high sensitivity collimator. Examinations are performed at acute stage (1-7 days after onset) and at subacute stage (8-14 days after onset). In acute stage, rCBF in the affected cerebral hemisphere has tendency to be low in 12 patients with angiospasm after the aneurysmal rupture comparing to those in patients without angiospasm. Low rCBF areas in cerebral hemisphere at acute stage were apt to become normal in subacute stage. rCBF measurement by 133Xe inhalation method seemed to be an useful method to evaluate rCBF in patients with ruptured aneurysm.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Ln(Fe3+M2+)O4 compounds with layer structure [Ln : Y,Er, Tm,Yb, and Lu, M : Mg,Mn, Co,Cu, and Zn]

A series of new compounds Ln(Fe³⁺M²⁺)O₄ [Ln : Y, Er, Tm, Yb, and Lu, M : Mg, Mn, Co, Cu, and Zn] were successfully synthesized and their lattice constants were determined. These compounds have the same crystal structure as YbFe₂O₄ and Fe³⁺ and M²⁺ are both surrounded by five oxygen ions forming a trigonal bipyramid. The synthetic conditions are presented. They are strongly dependent upon the constituent cations of the compound.     

Asymmetric total syntheses of (+)-mycoepoxydiene and related natural product (-)-1893A: application of one-pot ring-opening/cross/ring-closing metathesis to construct their 9-oxabicyclo[4.2.1]nona-2,4-diene skeleton

The total syntheses of (+)-mycoepoxydiene and (-)-1893A have been completed. The present synthetic strategy features the use of one-pot ring-opening/cross metathesis (ROM/CM) followed by a ring-closing metathesis (RCM) reaction, allowing for the concise construction of the 9-oxabicyclo[4.2.1]nona-2,4-diene framework from a 7-oxabicyclo[2.2.1]hept-2-ene derivative and 1,3-butadiene. The sequential metathesis product was converted into (+)-mycoepoxydiene through the oxidative rearrangement of a furfuryl alcohol to a pyranone, thereby establishing its absolute stereochemistry. From the common intermediate, a structurally related natural product (-)-1893A was also synthesized via the vinylogous aldol reaction.     

Synthesis and reactivities of 10-S-3 trithiadiazapentalene derivatives

1,3-Bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidinethiones 3a-f reacted with bromine to give trithiadiazapentalene derivatives 5a-f , bearing the exocyclic C-N double bonds, in moderate yields. The molecular structure of 5b was elucidated by the X-ray crystallographic analysis. The treatment of 5b-f with hydrochloric acid gave the ring-opening products, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazo-lidinones 9b-f , accompanied by the production of elemental sulfur. Reduction of 5b , 5d , and 5e with sodium borohydride gave the ring-opening compounds, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidines 13b , 13d , and 13e respectively.     

Structure-specificity relationship of cardiac glycosides as a substrate for glucohydrolase II

Cardenolide glucohydrolase II (CGH II) is a cardenolide-specific glucohydrolase obtained from Digitalis lanata leaves. We investigated the structure-specificity relationship of several cardenolide disaccharides as a substrate for CGH II. Conformation analysis of the substrates was performed using molecular mechanics calculations. The sugar chain conformation of two inert glycosides was significantly different from that of the other glycosides. The other two glycosides, which were weak substrates of CGH II, were suggested to have an intramolecular hydrogen bond between the sugar groups. It was deduced that this hydrogen bond restricts the conformational change of the sugar chain and prevents the glycosides from enzymatic recognition.     

Ab initio MO Calculations of benzene + TCNE and naphthalene + TCNE complexes with STO-3G π-split basis set

Ab initio SCF MO calculations have been carried out on benzene + TCNE (tetracyanoethylene) and naphthalene + TCNE complexes with the STO -3G, STO -3G π-split (STO -3G for π orbitals and a split basis for π orbitals), and 4–31G basis sets. The interaction energy, gross charges, dipole moment, and the electron density in the middle plane of the complexes have also been evaluated. The STO -3G π-split basis set is appropriate for the calculation of large π–π stacking complexes from two points of view, production of reliable results and ease of computations. The approximation scheme based on the semiorthogonalized orgitals is revealed to be very efficient to save CPU time and storage in such calculations. The stable conformation and the charge-transfer interaction of the two complexes are discussed on the basis of the calculated quantities.     

Pyrimidines. XIII. Novel pyrimidine to pyrimidine transformation reactions

Novel pyrimidine to pyrimidine transformation reactions are described. 1,3-Dimethyl-(or diethyl)-uracil(1) are converted into isocytosine, 2-thiouracil or uracil derivatives by treatment with guanidine, thiourea or urea, respectively. The latter two cases require base catalysis. The effects of some substituents at C-5 and C-6 of 1,3-dialkylated uracils (1a → 1e) on this transformation were examined and a plausible mechanism is offered for their reaction. The utility of this reaction is exemplified by the facile two-step conversion of pseudouridine into the anlileukemic agent, pseudoisocytidine, in good overall yield.