Rate coefficients and products for gas‐phase reactions of chlorine atoms with cyclic unsaturated hydrocarbons at 298 K

Rate coefficients for the reaction of Cl atoms with cycloalkenes have been determined using the relative rate method, at 298 K and atmospheric pressure of N₂. Reference molecule was n‐hexane, and the concentrations of the organics were followed by gas chromatographic analysis. Cl atoms were prepared by photolysis of trichloroacetyl chloride at 254 nm. The relative rates of reactions of Cl atoms with cycloalkenes, with respect to n‐hexane, are measured as 1.12 ± 0.38, 1.31 ± 0.14, and 1.69 ± 0.18 for cyclopentene, cyclohexene, and cycloheptene, respectively. Considering the absolute value of the rate coefficient of the reaction of Cl atom with n‐hexane as 3.03 ± 0.06 × 10^?10 cm³ molecule^?1 s^?1, the rate coefficient values for cyclopentene, cyclohexene, and cycloheptene are calculated to be (3.39 ± 1.08) × 10^?10, (3.97 ± 0.43) × 10^?10, and (5.12 ± 0.55) × 10^?10 cm³ molecule^?1 s^?1, respectively. The experiments for each molecule were repeated six to eight times, and the slopes and the rate coefficients given above are the average values of these measurements, and the quoted error includes 2σ as well as all other uncertainties in the measurement and calculations. The rate coefficient increases linearly with the number of carbon atoms, with an increment per additional CH₂ group being (8.7 ± 1.6) × 10^?12 cm³ molecule^?1 s^?1. Chloroketones and chloroalcohols, along with unsaturated ketones and alcohols, were found to be the major products of Cl‐atom‐initiated oxidation of cycloalkenes in the presence of air. The atmospheric implications of these results are discussed, along with a comparison with the reported structure activity relationships. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 98–105, 2010     

Effect of energy dependence of primary beam divergence on the X-ray standing wave characterization of layered materials.

Incident primary beam divergence is a source of systematic error in X-ray standing wave (XSW) characterization of single and multilayer thin films. Primary beam divergence significantly alters the XSW profile of a layered material and can lead to large errors when used with higher excitation energies. The present study suggests that when one uses Mo-Kalpha excitation, the primary beam divergence should be in range of 0.005(0). On the other hand, in the case of Cu-Kalpha excitation, primary beam divergence can be relaxed up to 0.01(0).     

Spectral distribution of X-Ray yield of the M-shell emission fromlaser produced gold plasma

Experimental measurements of the spectral distribution of keV X-ray energy conversion of the M-shell emission from gold plasma produced by a 4 GW, 5 nS Nd:glass laser are presented. At a laser intensity of 2×10¹³ W/cm², the overall X-ray yield for 2.0 ⩽hv⩽3.6 keV is determined to be 0.1% of the laser energy. The effect of the keV X-ray spectral distribution on radiation preheat is discussed     

Evidence for the decay D0-->K(-)pi(+)pi(-)e(+)nu(e)

Using a 281 pb{-1} data sample collected at the psi(3770) with the CLEO-c detector, we present the first absolute branching fraction measurement of the decay D0-->K(-)pi(+)pi(-)e(+)nu(e) at a statistical significance of about 4.0 standard deviations. We find 10 candidates consistent with the decay D0-->K(-)pi(+)pi(-)e(+)nu(e). The probability that a background fluctuation accounts for this signal is less than 4.1 x 10{-5}. We find B(D0-->K(-)pi(+)pi(-)e(+)nu(e)) = [2.8{-1.1}{+1.4}(stat)+/-0.3(syst)]x10{-4}. By restricting the invariant mass of the hadronic system to be consistent with K1(1270), we obtain the product of branching fractions B(D{0}-->K{1}{-}(1270)e{+}nu{e})xB(K1-(1270)-->K{-}pi{+}pi{-})=[2.5{-1.0}{+1.3}(stat)+/-0.2(syst)]x10{-4}. Using B(K1-(1270)-->K{-}pi{+}pi{-})=(33+/-3)%, we obtain B(D{0}-->K{1}{-}(1270)e{+}nu{e})=[7.6{-3.0}{+4.1}(stat)+/-0.6(syst)+/-0.7]x10{-4}. The last error accounts for the uncertainties in the measured K1-(1270)-->K{-}pi{+}pi{-} branching fractions.     

Strong enhancement and extinction of single harmonic intensity in the mid- and end-plateau regions of the high harmonics generated in weakly excited laser plasmas

Strong intensity enhancement or extinction of some single harmonics is observed in high-harmonic generation from 48 fs Ti:sapphire laser pulses propagating through preformed low-excited laser-produced plasmas of various materials (GaAs, Cr, InSb, stainless steel). The intensities of some of the harmonics in the mid- and end-plateau regions vary from ~23-fold enhancement to near disappearance compared with those of the neighboring ones. It is also shown that the observed intensity enhancement (or extinction) can be varied by controlling the chirp of the driving laser radiation.     

Synthesis of Novel Benzofuran‐Gathered C‐2,4,6‐substituted Pyrimidine Derivatives Conjugated by Sulfonyl Chlorides: Orally Bioavailable,Selective, Effective Antioxidants and Antimicrobials Drug Candidates

In the present study, we have made an effort to develop the novel synthetic antioxidants and antimicrobials with improved potency. The novel benzofuran‐gathered C‐2,4,6‐substituted pyrimidine derivatives 5a , 5b , 5c , 5d , 5e , 5f , 6a , 6b , 6c , 6d , 6e , 6f , 7a , 7b , 7c , 7d , 7e , 7f , 8a , 8b , 8c , 8d , 8e , 8f , 9a , 9b , 9c , 9d , 9e , 9f were synthesized by simple and efficient four‐step reaction pathway. Initially, o‐alkyl derivative of salicylaldehyde readily furnish corresponding 2‐acetyl benzofuran 2 in good yield, upon the treatment with potassium tertiary butoxide in the presence of molecular sieves. Further, Claisen–Schmidt condensation with aromatic aldehydes via treatment with thiourea followed by coupling reaction with different sulfonyl chlorides afforded target compounds. The structures of newly synthesized compounds were confirmed by IR, ¹H NMR, ¹³C NMR, mass, and elemental analysis and further screened for their antioxidant and antimicrobial activities. The results showed that the synthesized compounds 8b , 8e , 9b , and 9e produced significant antioxidant activity with 50% inhibitory concentration higher than that of reference, whereas compounds 7d and 7c produced dominant antimicrobial activity at concentrations 1.0 and 0.5 mg/mL compared with standard Gentamicin and Nystatin, respectively.     

Pyrolysis of sorghum bagasse biomass into bio-char and bio-oil products

The transformation of renewable biomass into valuable products as alternatives to fossil fuels is essential for sustainable energy in sustainable society. This work systematically investigates the pyrolysis of sorghum bagasse biomass into bio-char and bio-oil products and studies the effect of temperature (623–823 K) on the conversion of sorghum bagasse and products yields. The physicochemical properties of bio-char were thoroughly studied using powder X-ray diffraction, elemental analysis (CHNSO), scanning electronic microscope, calorific value (CV), and Fourier transform infrared (FTIR) spectroscopy techniques. Also, gas chromatography–mass spectrometry (GC–MS), CV, and FTIR were used to understand the properties of bio-oil. The results obtained indicate that an increase in the pyrolysis temperature from 623 to 823 K leads to a decrease in the bio-char yield from 42.55 to 30.38%. On the other hand, the maximum bio-oil yield of 15.94% was obtained at 723 K. The bio-char obtained at 673 and 773 K was found by FTIR analysis to be composed of a highly ordered aromatic carbon structure. The calorific value of bio-oil, which contains a greater amount of acidic compounds, was found to be 6740 kcal/kg. The GC–MS analyses revealed the presence of octadecenoic acid, p-cresol, 2,6-dimethoxy phenol, 4-ethyl 2-methoxy phenol, phenol, o-guaiacol, and octadecanoic acid in the bio-oil obtained from the pyrolysis of sorghum bagasse biomass. The present study provides useful information for understanding the quality of bio-oil and bio-char obtained from high biomass sorghum bagasse.     

Computational method for phase space transport with applications to lobe dynamics and rate of escape

Lobe dynamics and escape from a potential well are general frameworks introduced to study phase space transport in chaotic dynamical systems.While the former approach studies how regions of phase space get transported by reducing the flow to a two-dimensional map, the latter approach studies the phase space structures that lead to critical events by crossing certain barriers. Lobe dynamics describes global transport in terms of lobes, parcels of phase space bounded by stable and unstable invariant manifolds associated to hyperbolic fixed points of the system. Escape from a potential well describes how the critical events occur and quantifies the rate of escape using the flux across the barriers. Both of these frameworks require computation of curves, intersection points, and the area bounded by the curves. We present a theory for classification of intersection points to compute the area bounded between the segments of the curves. This involves the partition of the intersection points into equivalence classes to apply the discrete form of Green’s theorem. We present numerical implementation of the theory, and an alternate method for curves with nontransverse intersections is also presented along with a method to insert points in the curve for densification.     

o-Iodoxy Benzoic Acid–Mediated Synthesis of 3,5-Diarylisoxazoles and Isoxazole-3-carboxylic Acids

A new, convenient, ecofriendly synthesis of 3,5-diarylisoxazoles is reported from α,β-unsaturated ketoximes. Similarly, a novel synthesis of isoxazole carboxylic acids is also reported. Both the methods use efficient, environmentally friendly, and nontoxic iodoxybenzoic acid (IBX) as an oxidative cyclizing reagent. Easy procedure, environmentally benign reaction conditions, and nontoxicity are advantages to the methodology.