Adsorption of C7 hydrocarbons on biporous SBA-15 mesoporous silica

In our recent studies (Vinh-Thang, H.; Huang, Q.; Eic, M.; Trong-On, D.; Kaliaguine, S. Langmuir 2005, 21, 2051-2057; Vinh-Thang, H.; Huang, Q.; Eic, M.; Trong-On, D.; Kaliaguine, S. Stud. Surf. Sci. Catal. 2005, in press), a series of synthesized SBA-15 materials were characterized using nitrogen adsorption/desorption isotherms at 77 K and SEM images. In the present paper, four of them (MMS-1-RT, MMS-1-60, MMS-1-80, and MMS-5-80) were further investigated with regard to their equilibrium characteristics using n-heptane and toluene as sorbates by the standard gravimetric technique. SBA-15 materials proved to have a broad pore size distribution within the micropore/small-mesopore range in the walls of their main mesoporous channels. The adsorption capacities for toluene were found to be higher than for n-heptane. The isosteric heats of adsorption, estimated by the Clausius-Clapeyron equation, are also higher for toluene compared to n-heptane. They were found to depend on framework microporosity of the relevant SBA-15 samples. The isosteric heats of adsorption for all sorbates decrease with increased loading and approach the heats of evaporation of the respective sorbate. The adsorption capacities of SBA-15 samples are significantly higher than those of silicalite, i.e., the MFI zeolite silica analogue. In contrast to that, the isosteric heats of adsorption in the mesopore channels of SBA-15 were found to be much smaller. This result also suggests that SBA-15 can potentially be a good candidate for separation of C(7) hydrocarbons.     

Preparation and characterization of a polyimide nanofoam through grafting of labile poly(propylene glycol) oligomer

Preparation of a polyimide nanofoam (PI‐F) for microelectronic applications was carried out using a polyimide precursor synthesized from poly[(amic acid)‐co‐(amic ester)] and grafted with a labile poly(propylene glycol) (PPG) oligomer. Polyimide precursor was synthesized by partial esterification of poly(amic acid) (PAA) derived from pyromellitic dianhydride (PMDA) and 4,4′‐oxydianiline (ODA). The precursor was then grafted with bromide‐terminated poly(propylene glycol) in the presence of K₂CO₃ in hexamethylphosphoramide and N‐methylpyrrolidone, imidized at 200°C in nitrogen and the product was subsequently decomposed in air at 300°C to eliminate the labile PPG oligomer to produce PMDA/ODA polyimide nanofoam. Nuclear magnetic resonance spectroscopy (¹H‐NMR) and Fourier transform infrared spectroscopy (FT‐IR) techniques were used to characterize the formation of polyimide precursor and extent of grafting of PPG with polyimide. The results of thermogravimetric analysis (TGA) showed three step decomposition of nanofoam with the removal of PPG at 350°C and decomposition of polyimide at around 600°C. The polyimide nanofoams were also characterized by small angle X‐ray scattering (SAXS), field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM). The morphology showed nanophase‐separated structures with uniformly distributed and non‐interconnected pores of 20–40 nm in size. Dynamic mechanical analysis (DMA) indicated higher storage modulus for the foamed structure compared to the pure PI with reduction in loss tangent for the former system. Copyright © 2004 John Wiley & Sons, Ltd.     

Partition of $$\pi $$-electrons among the faces of polyhedral carbon clusters

We apply the concepts of importance and redundancy to compute and analyze the partition of \(\pi \)-electrons among faces of actual and potential polyhedral carbon clusters. In particular, we present explicit formulas and investigate asymptotic behavior of total and average \(\pi \)-electron content of all faces of prisms and n-barrels. We also discuss the observed deviations from the uniform distribution and show that the patterns of net migration of \(\pi \)-electrons differ from those computed for narrow nanotubical fullerenes. Some possible directions of future work are also indicated.     

Mannich aminomethylation of flavonoids and anti-proliferative activity against breast cancer cell

We herein report Mannich aminomethylation of variously structural flavonoids and their biological evaluation against human breast cancer cell. Mannich reaction showed that substitution at C-6 position depends on amine basicity and C-ring feature of flavonoids. All five flavonoid substrates reacted with strong amine bases to afford the bis(6,8-aminomethyl) derivatives, while with weak amines, the different products were obtained dependently on structural characteristic of flavonoid. 3-OH and 3-O-substituted groups on the C-ring exhibited the deactivated aminomethylation at C-6 position, whereas substitution at this position was independent on bond feature at C-2 and C-3 on the C-ring. Screening anti-proliferative activity showed six flavonoids possessed activity against breast cancer cell, MDA-MB-231. Among them, the flavonoids, luteolin (2) and 3′,4′,5,7-tetrahydroxy-6,8-bis(pyrrolidin-1-ylmethyl)-3-rutinosylflavone (3a), displayed the highest anti-proliferative activity with the lowest IC₅₀ values.     

Inclusion complexes of <Emphasis Type="Italic">p</Emphasis>-hydroxybenzoic acid esters and γ-cyclodextrin

The alkyl esters of p-hydroxybenzoic acid (parabens) are commonly used as preservatives in cosmetics, food products and pharmaceutical formulations because of their wide range antimicrobial activity. However, the usage of parabens in aqueous media has been hampered, especially parabens with long alkyl chains, due to their low aqueous solubility. One approach to increase their solubility is cyclodextrins (CDs) complexation to form water-soluble inclusion complexes. γCD has the widest hydrophobic central cavity and the highest water solubility among natural CDs. Hence, inclusion complexes between γCD and parabens of various alkyl chain lengths were investigated. Results from phase-solubility studies show that methyl- and ethylparaben form various complexes of paraben/γCD (i.e. 1:1, 2:1, etc.) while the 1:1 complex was dominant in propyl- and butylparaben/γCD complex solution. Moreover, the effect of the paraben complexation on the critical aggregation concentration (cac) of γCD in aqueous solutions was determined. It was found that the longer the paraben alkyl chain was the more influence it had on the γCD cac. In pharmaceutical formulations the mixture of parabens (i.e. binary, ternary and quaternary) has been used to maximize antimicrobial effect. It is important to determine how mixtures of parabens affect the solubility of γCD and its cac values upon formation of inclusion complexes. Competition of the different parabens for a space in the γCD central cavity was evaluated by comparing the γCD cac values obtained in presence of the individual parabens and their mixtures.     

Application of density functional theory to capillary phenomena in cylindrical mesopores with radial and longitudinal density distributions

In this paper, we applied a version of the nonlocal density functional theory (NLDFT) accounting radial and longitudinal density distributions to study the adsorption and desorption of argon in finite as well as infinite cylindrical nanopores at 87.3 K. Features that have not been observed before with one-dimensional NLDFT are observed in the analysis of an inhomogeneous fluid along the axis of a finite cylindrical pore using the two-dimensional version of the NLDFT. The phase transition in pore is not strictly vapor-liquid transition as assumed and observed in the conventional version, but rather it exhibits a much elaborated feature with phase transition being complicated by the formation of solid phase. Depending on the pore size, there are more than one phase transition in the adsorption-desorption isotherm. The solid formation in finite pore has been found to be initiated by the presence of the meniscus. Details of the analysis of the extended version of NLDFT will be discussed in the paper.     

Multicomponent adsorption on activated carbons under supercritical conditions

Adsorption of binary mixtures onto activated carbon Norit R1 for the system nitrogen-methane-carbon dioxide was investigated over the pressure range up to 15 MPa. A new model is proposed to describe the experimental data. It is based on the assumption that an activated carbon can be characterized by the distribution function of elements of adsorption volume (EAV) over the solid-fluid potential. This function may be evaluated from pure component isotherms using the equality of the chemical potentials in the adsorbed phase and in the bulk phase for each EAV. In the case of mixture adsorption a simple combining rule is proposed, which allows determining the adsorbed phase density and its composition in the EAV at given pressure and compositions of the bulk phase. The adsorbed concentration of each adsorbate is the integral of its density over the set of EAV. The comparison with experimental data on binary mixtures has shown that the approach works reasonably well. In the case of high-pressure binary mixture adsorption, when only total amount adsorbed was measured, the proposed model allows reliably determining partial amounts of the adsorbed components.     

Electrohydrodynamics of a drop under nonaxisymmetric electric fields

We consider the electrohydrodynamics of a spherical drop in a nonaxisymmetric electric field, which can be approximated by the sum of a uniform field and a linear straining field. We obtain the analytic solution of the three-dimensional flow fields inside and outside a drop for the Stokes flow regime by using Lamb's general solution and the leaky dielectric model. With the analytic solution, the dielectrophoretic migration velocity of a drop is obtained as a function of the type and the frequency of the imposed electric field. The direction of drop motion is found to be parallel to the dielectrophoretic force. The analytic solution is also used to investigate the characteristics of the interfacial flow under various nonaxisymmetric electric fields. While investigating the interfacial flow, we find a surface vortex structure under certain nonaxisymmetric electric fields, which is found to be related to the chaotic mixing inside the drop. Finally, we consider the chaotic features of three-dimensional flows inside the drop under static nonaxisymmetric electric fields.