Investigation of multicomponent fluoride optical materials in the UV spectral region: I. Single crystals of Ca1−x R xF2+x (R = Sc, Y, La, Yb, Lu) solid solutions

Crystalline materials that are transparent in the vacuum UV spectral region and currently used have been reviewed. Transmission of crystals of solid solutions with the fluorite structure Ca_1?x R _xF_2+x (R = Sc, Y, La, Yb, Lu) in the UV and vacuum UV spectral regions has been investigated. It is shown that application of different methods of purification of fluorides from some impurities can significantly improve the optical quality of fluoride multicomponent crystals in the short-wavelength spectral region.     

Structure and superconductivity in FexCu1−xBa2YCu2O7+y superconductors synthesized by high pressure

Comprehensive studies of X-ray diffraction, oxygen content, superconductivity and Mössbauer effect have been made on Fe_xCu_1−xBa₂YCu₂O_7+y superconductors (0.00≤x≤0.70) synthesized by ambient (AM) and high pressure (HP). Results indicate that all the HP-samples have tetragonal structure, smaller lattice parameter c and unit-cell volume than the AM-samples. The studies of oxygen content, and Mössbauer spectroscopy indicate that the HP-samples have higher oxygen content, carrier concentration and average valence of Fe than the AM-samples. Moreover, for the HP-samples more Fe atoms located in CuO_x chains have fivefold-oxygen coordination. These are important reasons for the enhancement of T_c in the HP-samples.     

The thermodynamic properties of Ln2BaO4 (Ln = Sm, Dy, Ho)

The thermodynamic properties of the Ln₂BaO₄ phases (Ln = Dy, Ho, Sm) were studied by the electromotive force method with a fluoride electrolyte (890–1180 K), solution calorimetry in 1.07 N hydrochloric acid at 298.15 K, and differential scanning calorimetry (298–860 K). The experimental data were jointly processed, and the thermodynamic functions of the compounds over the temperature range 298–1200 K were calculated.     

Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

Empfindlichkeit chemischer Reaktionen IV. Teil: Reaktionen von organischen Verbindungen

Ohne Zusammenfassung     

Sulphide based anode material for lithium rechargeable battery

In this study, lead sulphide (PbS) was prepared by the chemical bath deposition technique. The sample was characterized by X-ray diffraction (XRD), Energy Dispersive Analysis of X-rays (EDAX) and cyclic voltammetry. EDAX spectrum shows peaks attributable to lead and sulphur. The EDAX analysis also shows that the prepared sample is stoichiometric. Cyclic voltammetry experiments were recorded at 100 mV·s⁻¹ and 400 mV·s⁻¹ scan rates. Results show that the rate controlling electrochemical reaction is electron transfer. The presence of redox waves shows that the lithium intercalation and deintercalation can occur as a result of lattice expansion in PbS. There were no differences in the PbS XRD data before and after the cyclic voltammetry experiments indicating that the PbS structure is not modified upon lithium ion intercalation and deintercalation in PbS. The discharge characteristics for 35 cycles of the cell using the LiCoO₂/PbS couple is presented indicating the possible development of such materials as anode in lithium ion cells.     

Diffusion Structural Analysis Study of Titania Films Deposited by Sol-Gel Technique on Silica Glass

The diffusion structural analysis (DSA) was used to characterize microstructure changes of hydrous titania gel films under in situ conditions of heating. TG and DTA were used in order to elucidate the processes controlling the formation of anatase film during heating of hydrous titania gel film. The annealing of porosity and near surface structure defects of the dehydrated titania films was indicated by DSA in the temperature range 255–700°C as the decrease of radon release rate. It was demonstrated that the annealing was enhanced on heating in oxygen in comparison with heating in argon. The DSA experimental results were compared with model curves describing the radon diffusion mobility and the annealing of radon diffusion paths.     

Buckling of a stiff thin film on a compliant substrate in large deformation

A finite-deformation theory is developed to study the mechanics of thin buckled films on compliant substrates. Perturbation analysis is performed for this highly nonlinear system to obtain the analytical solution. The results agree well with experiments and finite element analysis in wavelength and amplitude. In particular, it is found that the wavelength depends on the strain. Based on the accurate wavelength and amplitude, the membrane and peak strains in thin films, and stretchability and compressibility of the system are also obtained analytically.     

Univariate Ore Polynomial Rings in Computer Algebra

We present some algorithms related to rings of Ore polynomials (or, briefly, Ore rings) and describe a computer algebra library for basic operations in an arbitrary Ore ring. The library can be used as a basis for various algorithms in Ore rings, in particular, in differential, shift, and q-shift rings. __________ Translated from Sovremennaya Matematika i Ee Prilozheniya (Contemporary Mathematics and Its Applications), Vol. 13, Algebra, 2004.