Identification and Separation of Some Anions on Plain and Mixed Adsorbent Layers Using Water as Eluent

The analytical potential of water as an eluent in thin layer chromatographic separation of various anions on plain adsorbent layers (silica gel "G" alumina, and cellulose) as well as on beds containing different combinations of silica gel, alumina, or cellulose has been investigated. In addition to some important separation of anions, microgram separation of IO⁻₄ from milligram quantities of IO⁻₃, Bro⁻₃, MoO²⁻₄, and Fe (CN)³⁻₆ has been realized. The effect on pH of the sample in the separation of IO⁻₄ from accompanying ions has also been studied. The limits of detection and dilution limits of anions on alumina thin layers have been determined. NO⁻₂ in artificial seawater has been detected. The effect of CaCl₂, MgCl₂, and NaHCO₃ on some ternary separations of analytical importance has been examined.     

Steric effects on nascent vibrational distributions of the HCN product produced in CN radical reactions with ethane, propane and chloroform

Time-resolved IR emission spectroscopy (TRIES) has been used to study infrared emission in the 3400–3100 cm⁻¹ region from HCN molecules produced when CN radicals abstract a hydrogen atom from ethane, propane, and chloroform. From these observations the nascent vibrational distributions of the HCN produced were derived. The nascent vibrational population distributions of the product HCN in all of the reactions are non-statistical and inverted in both the pure CH stretch (00p) and CH stretch—bend (0np) series.     

MgBr2·OEt2 mediated protection of alcohols with hexamethyldisilazane: An efficient catalytic route for the preparation of silyl ethers under solvent-free conditions

Various types of alcohols and phenols were rapidly protected by hexamethyldisilazane in good to excellent yields at room temperature in the presence of catalytic amount of magnesium bromide ethyl etherate under solvent-free conditions. Good to excellent chemoselectivity was demonstrated for competitive protection of primary hydroxyls in the presence of secondary and tertiary alcohols. Highly selective protection of phenols in the presence of aromatic amines was also demonstrated successfully.     

Bis(2-hydroxyacetophenone)ethylenediimine as a neutral carrier in a coated-wire membrane electrode for lead(II).

A coated-wire ion-selective electrode (CWISE), based on a Schiff base as a neutral carrier, was successfully developed for the detection of Pb(II) in aqueous solution. CWISE exhibited a linear response with a Nernstian slope of 29.4 +/- 0.5 mV/decade within the concentration range of 1.0 x 10(-5) - 1.0 x 10(-1) M lead ion. CWISE has shown detection limits of 5.0 x 10(-6) M. The electrode exhibited good selectivity over a number of alkali, alkaline earth, transition and heavy metal ions. This sensor yielded a steady potential within 10 to 20 s at a linear dynamic range. The electrode was suitable for use in aqueous solutions in a pH range of 2.0 to 5.0. Applications of this electrode for the determination of lead in real samples and as indicator electrode for potentiometric titration of Pb2+ ion using K2CrO4 are reported.     

Analysis of anions by solid-state spot-tests

Trituration and capillary solid-state spot-tests for 25 anions with a number of organic and inorganic reagents have been examined. A comparative study of the corresponding reactions in solution has also been made. Incorporation of a glass-wool plug in the capillary improves the selectivity. Schemes are presented for possible use of the technique.     

Construction of solid-liquid phase diagrams in ternary systems by titration calorimetry

Titration calorimetry was used to construct the solid-liquid equilibrium line in ternary systems containing the solute and an aqueous mixed solvent by measuring the heat of dissolution of the solid solute during successive additions of the liquid solvent. The plot of cumulated heats versus the mole ratio, n_solvent/n_solute, yields two (almost) linear increases of different slopes. These two lines represent successively the enthalpy of dissolution then the enthalpy of dilution of the medium; their intersection gives the solubility and the enthalpy of dissolution of the solute. Phase diagrams have been established over the whole concentration range for o-anisaldehyde, 1,3,5-trimethoxybenzene and vanillin, in water + methanol, +ethanol, or +n-propanol at 303, 313 and 318 K.     

An Efficient and Facile Synthesis of Quinoxaline Derivatives Catalyzed by KHSO4 at Room Temperature

Summary. A facile synthesis of quinoxaline derivatives catalyzed by KHSO₄ in very high yields at room temperature is reported.     

A Method for the Acetylation of Alcohols Catalyzed by Heteropolyoxometallates

Summary. Esterifications of acetic acid with some linear, secondary, tertiary, and benzylic alcohols mediated by catalytic amounts of Keggin, Wells–Dawson, and Preyssler type heteropolyacids were carried out under reflux at mild reaction conditions with good to excellent yields. Among the examined catalysts, H₃PW₁₂O₄₀ and H₁₄NaP₅W₃₀O₁₁₀ revealed better results than other heteropolyacids. This work was performed with the aim of simplifying the esterification process by omitting any solvents and mineral acid catalysts. Easy work-up, low cost, and acidic waste reduction, which are all important features from the environmental and economical points of view, are distinct aspects of this protocol. Heteropolyacid catalysts could be separated after a simple work-up and reused for several times.     

An ultrasensitive fluorescence sensor for determination of trace levels of copper in blood samples

A novel SBA-15-based fluorescent sensor, SBA-PI: mesoporous SBA-15 structure modified with iminostilbene groups, was designed, synthesized, and characterized by Fourier transform-infrared spectroscopy (FT-IR), ultraviolet–visible spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), low-angle X-ray diffraction techniques (low-angle XRD), and N₂ adsorption–desorption techniques. The SBA-PI as a sensor with a selective behavior for detection of Cu²⁺ comprises iminostilbene carbonyl as the fluorophore group. The SBA-PI sensor displays an excellent fluorescence response in aqueous solutions and the fluorescence intensity quenches remarkably upon addition of Cu²⁺. Other common interfering ions even at high concentration ratio showed either no or very small changes in the fluorescence intensity of SBA-PI in the absence of Cu²⁺. A limit of detection of 8.7 × 10⁻⁹ M for Cu²⁺ indicated that this fluorescence sensor has a high sensitivity and selectivity toward the target copper (II) ion. The fabricated Cu²⁺ sensor was successfully applied for the determination of the Cu²⁺ in human blood samples without any significant interference. With the selective analysis of Cu²⁺ ions down to 0.9 nM in blood, the sensor is a promising and a novel detection candidate for Cu²⁺ and can be applied in the clinical laboratory. A reversibility and accuracy in the fluorescence behavior of the sensor was found in the presence of I^¯ that was described as a masking agent for Cu²⁺.

Graphical abstract

     

Water as an Efficient Solvent for Oxygenation Transformations with 34% Hydrogen Peroxide Catalyzed by some Heteropolyoxometalates

Summary. A highly efficient, selective, fast, and cheap protocol is developed for oxidation of aromatic amines and alcohols utilizing 34% hydrogen peroxide in water catalyzed by some W- and Mo-based heteropolyoxometalates. Findings showed that dodecatungstophosphoric acid, H₃PW₁₂O₄₀, was the most efficient catalyst in the examined oxidation reactions. This methodology may prove to be a valuable alternative for eco-friendly green oxidation. Inherent simplicity, easy work up, and using regenerable catalysts were other key aspects of this oxidation protocol.