The first report on the catalytic oxidation of urazoles to their corresponding triazolinediones via in situ catalytic generation of Br using periodic acid or oxone/KBr system

A combination of periodic acid or oxone^® and a catalytic amount of KBr in the presence of few drops of water, were used for the catalytic oxidation of urazoles and bis-urazoles to their corresponding triazolinediones under mild and heterogeneous conditions with moderate to excellent yields.     

Thermal degradation of iron polymethacrylate

Iron polymethacrylate was synthesized by free radical solution polymerization of methacrylic acid, followed by replacement of the carboxylic proton with iron. Thermal volatilization analysis and thermogravimetry were used to study its thermal stability from ambient temperature up to 500oC. The results reveal that ferric oxide is left as residue at the end of the thermal degradation experiments.The authors dedicate this paper to the memory of the late Dr. Mohammad Zulfiqar of Quaid i Azam University, Islamabad, Pakistan.     

Kinetic study of the oxidation of some catecholamines by digital simulation of cyclic voltammograms

Electrochemical oxidation of some catecholamines such as dopamine ( 1 ), L ‐dopa ( 2 ), and methyldopa ( 3 ) has been studied in various pH values, using cyclic voltammetry. The results indicate participation of catecholamines ( 1–3 ) in intramolecular cyclization reaction to form the corresponding o‐quinone derivatives ( 1d–3d ). In various pHs, based on ECE mechanism, the observed homogeneous rate constants (k_obs) of cyclization reaction were estimated by comparing the experimental cyclic voltammetric responses with the digital‐simulated results. Also, the cyclization rate constants (k_cyc) were calculated using microscopic acidic dissociation constant of ammonium groups. The significant differences in electrochemical behavior, k_obs and k_cyc, of L ‐dopa ( 2 ) and methyldopa ( 3 ) with dopamine ( 1 ) are due to the effects of the side chain carboxyl group. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 37: 17–24, 2005     

Spectral Analysis of Some Distillates from Asphalt Cracking and Evaluation of UTIMAC as Cracking Catalyst

This paper demonstrates the spectral analysis of some distillates obtained from asphalt cracking in the presence of a conventional expensive catalyst, i.e., HZSM‐5, and local cheap and readily available clay, i.e., UTIMAC. Each distillate was fractionated into pentane soluble (PI) and pentane insoluble (PI) fractions based on solubility in n, pentane. Both PS and PI obtained in the case of HZSM‐5 and UTIMAC were analyzed by ¹H‐NMR spectrophotometry using CDCl₃ as dissolving solvent and tetramethylsilane (TMS) as internal standard. It is evident from the profiles that both catalysts caused the generation of some peaks ascribed to methylene and methene configurations in the aliphatic region. Bands corresponding to aromatic configurations were also generated. The results indicate that the cheap local catalyst used has comparable suitability with the conventional expensive catalyst in terms of asphalt cracking.     

A mild and efficient palladium–triethylsilane system for reduction of olefins and carbon–carbon double bond isomerization

The versatility of palladium(II) acetate and palladium on activated charcoal catalysts with triethylsilane has been investigated in the hydrogenation and the isomerization of carbon–carbon double bond of 1‐alkenes. The reduction of 1‐alkenes was carried out in the presence of triethylsilane, ethanol and a catalytic amount of palladium(II) acetate or palladium on activated charcoal, at room temperature. This facile and efficient method affords high yields for hydrogenation of unsaturated alkenes to the corresponding alkanes. Then the carbon–carbon double bond isomerization of 1‐alkenes was tested using the same catalysts in the absence of solvent. The system palladium(II) acetate‐triethylsilane was found to be more effective compared with palladium on an activated charcoal–triethylsilane system at room temperature, while comparable results were obtained at 50 °C for both catalysts. Copyright © 2006 John Wiley & Sons, Ltd.     

A multistep collocation method for solving advection equations with delay

Advection equations with delay are appeared in the modeling of the dynamics of structured cell populations. In this article, we construct an efficient two-dimensional multistep collocation method for the numerical solution of a class of advection equations with delay. Equations with aftereffect and equations with both aftereffect and retardation of a state variable are considered. Computability of the algorithm and convergence properties of the proposed numerical method are analyzed for solutions in appropriate Sobolev spaces, and it is shown that the proposed scheme enjoys the spectral accuracy. Numerical examples are given and comparison with other existing methods in the literature is made to demonstrate the efficiency, superiority and high accuracy of the presented method.     

Application of an Itô-based approximation method to random vibration of a pinching hysteretic system

In this paper, an extension of the Cumulant-Neglect closure scheme is utilized for the random vibration analysis of a single degree of freedom system with a general pinching hysteresis restoring force. The hysteresis element used in the system model can simulate commonly observed forms of stiffness, strength and pinching degradations. The second order statistics of the system response to a stationary Gaussian white noise input are derived using an Itô-based approximation technique. The validity of these response statistics are then verified by comparing them to Monte Carlo simulation results. The numerical studies performed for different combinations of degradation parameters and excitation levels show that the response estimates obtained by this solution method are in good agreement with Monte Carlo simulation. These studies also indicate the applicability of this technique for response analysis of complicated forms of non-linearities.     

Bioconversion potential of Trichoderma viride HN1 cellulase for a lignocellulosic biomass Saccharum spontaneum

The industrialisation of lignocellulose conversion is impeded by expensive cellulase enzymes required for saccharification in bioethanol production. Current research undertakes cellulase production from pretreated Saccharum spontaneum through Trichoderma viride HN1 under submerged fermentation conditions. Pretreatment of substrate with 2% NaOH resulted in 88% delignification. Maximum cellulase production (2603 ± 16.39 U/mL/min carboxymethyl cellulase and 1393 ± 25.55 U/mL/min FPase) was achieved at 6% substrate at pH 5.0, with 5% inoculum, incubated at 35°C for 120 h of fermentation period. Addition of surfactant, Tween 80 and metal ion Mn⁺², significantly enhanced cellulase yield. This study accounts proficient cellulase yield through process optimisation by exploiting cheaper substrate to escalate their commercial endeavour.     

Abeliaside,a new phenolic glucoside from Abelia triflora

A new phenolic glucoside, abeliaside, along with four known compounds, 5,6,7,4′-tetrahydroxy flavones, caffeic acid, 4-O-caffeoylquinic acid and caffeic acid glucoside, was isolated from the leaves of Abelia triflora R. Br. (Caprifoliaceae). The structure of the new compound was elucidated by different spectroscopic techniques. Compounds 1–5 were assayed for their anticancer activities against two cancerous human cell lines, MCF-7 and PC-3 cells, and normal Vero cell line using the crystal violet staining method. From the results it could be seen that caffeic acid possessed the highest anticancer effect against MCF-7 (IC₅₀: 17 μg/mL) and PC-3 (IC₅₀: 20.1 μg/mL) compared to vinblastine sulphate as reference drug (IC₅₀: 4.6, 2.8 μg/mL). The other compounds showed weak anticancer activity on both cell lines.