Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Thermal stability of phthalate esters: Effect of substituents on the β-carbon atom

In order to clarify the mechanism conferring heat resistance on phthalate esters, those with a substituent on the β-carbon atom, such as bis(2-aminobutyl) phthalate, bis(2-nitrobutyl) phthalate, bis(2,4-diphenylbutyl) phthalate and dineopentyl phthalate, were synthesized and their thermal stabilities were studied by thermogravimetry and differential thermal analysis. The analytical results for these phthalate esters were compared with those for dibutyl phthalate, with a straight alkyl chain. As the temperatures required for a 3% weight loss of phthalate esters with a substituent, an electron-donating group (amino group) or an electron-accepting group (nitro group) on the β-carbon atom move to the higher end of the range, the effect of the adjacent group was recognized. The presence of a phenyl group in phthalate esters considerably improved the heat resistance. It is considered that the high heat resistance of bis(2,4-diphenylbutyl) phthalate is due to the obstruction of the planar configuration for cis elimination by the phenyl group and hindrance by the phenyl group of the formation of the six-membered cyclic transition state owing to the interaction between non-bondable molecules.     

Woodfordin C, a macro-ring hydrolyzable tannin dimer with antitumor activity, and accompanying dimers from Woodfordia fruticosa flowers

Three new dimeric hydrolyzable tannins, woodfordins A, B and C, along with seven known hydrolyzable tannins, including oenothein B, a dimer exhibiting marked host-mediated antitumor activity, were isolated from an Indonesian crude drug, Sidowayah [dried flowers of Woodfordia fruticosa (L.) Kurz (Lythraceae)]. The structures of the new tannins were elucidated based on chemical and spectral evidence. Woodfordin C, having a macro-ring structure, was also found to exhibit a significant antitumor activity.     

High-sensitive elemental analysis using multi-parameter coincidence spectrometer: GEMINI-II

In this study, using neutron activation analysis with multi-parameter coincidence method which was developed at Japan Atomic Energy Agency (JAEA), a non-destructive, ultra-high sensitive multi-elemental determination has been realized. The multi-parameter coincidence method is carried out with an array of 19 germanium detectors, GEMINI-II. Using this system, very weak γ-rays emitted from trace amounts of elements can be detected. The iridium concentration has been determined by means of neutron activation analysis with multi-parameter coincidence method for Cuban sediment samples across the K/T boundary strata.     

Determination of the double-bond position in hexadecenols by mass spectrometry without prior chemical modification

Fourteen isomers of chemically unmodified hexadecenol were analysed by two types of quadrupole mass spectrometer, coupled with a gas chromatograph, for the location of the double-bond position. A series of spectra were interpreted in terms of mass spectral patterns on a fuzzy classification, in which the intensity ratios of six diagnostic pairs of the predominant ions were preferred in devising similarity indices. The accuracy of the method in the location of double-bond position was confirmed by testing with other series of spectra.     

Conformation of poly(<Emphasis Type="SmallCaps">l</Emphasis>-glutamic acid) in bipolar amphiphiles with alkyl ammonium cations of different hydrophobicity

The conformation of the sodium salt of poly(l-glutamic acid) (P(Glu)) in solutions of the cationic bipolar amphiphile 1, 20-isosanediylbis(alkylammonium chloride) (C ₂₀(RA) ₂) with different alkyl head groups as a function of amphiphile concentration was investigated using circular dichroism (CD). RA included methylammonium (MA), ethylammonium (EA), propylammonium (PA), butylammonium (BA), and pentylammonium (PeA) cationic groups. The CD spectrum of each C ₂₀(RA) ₂ had a double minima corresponding to the a-helix of P(Glu), which was replaced by CD spectra with a single minimum at wavelengths larger than 222 nm as concentration increased. These changes in the CD spectrum were ascribed to the conformational change from random coil to a-helix and to aggregates of helices. In C ₂₀(EA) ₂ solutions, a step-like change in the CD intensity was observed at 222 nm as a function of the ratio of C ₂₀(RA) ₂ to P(Glu). At the step, the CD spectrum of the complete a-helix was observed. At 10–35 °C, an a-helix was induced in P(Glu) in the order: C ₂₀(EA) ₂>C ₂₀(MA) ₂>C ₂₀(PA) ₂>C ₂₀(BA) ₂>C ₂₀(PeA) ₂. This order was ascribed to the best fit of ethylammonium to the P(Glu) side chain.     

Fluorocinnoline derivatives. II. Synthesis and antibacterial activity of fluorinated 1-alkyl-1,4-dihydro-4-oxocinnoline-3-carboxylic acids

Chemical modification of cinoxacin was studied with the aim of improving its antibacterial activity and spectrum. Alkylation of ethyl 6,7,8-trifluoro- and 6,7-difluoro-4-hydroxycinnoline-3-carboxylates (1 and 7) with alkyl iodide or dialkyl sulfate gave ethyl 1-alkyl-6,7,8-trifluoro- and 6,7-difluoro-1,4-dihydro-4-oxocinnoline-3-carboxylates (2 and 8), together with the isomeric anhydro-bases 3 and 9 of 2-alkyl-3-ethoxycarbonyl-6,7,8-trifluoro- and 6,7-difluoro-4-hydroxycinnolinium hydroxides, respectively. Acid-catalyzed hydrolysis of the 1-alkyl derivatives 2 and 8 gave the corresponding carboxylic acids 4 and 10. The same treatment of 3 and 9, accompanied with decarboxylation of the inner salts 5 and 11, afforded the anhydro-bases 6 and 12 of 2-alkyl-4-hydroxycinnolinium hydroxides, respectively. Displacement reactions of 4 and 10 with nucleophiles such as amine, alkoxide and thiolate gave 7-substituted 1-alkyl-6,8-difluoro- and 6-fluoro-1,4-dihydro-4-oxocinnoline-3-carboxylic acids (13 and 17-35). Antibacterial activities of these compounds were evaluated and compared with those of cinoxacin and norfloxacin. Some compounds showed a broader spectrum and more potent activity than cinoxacin, but were considerably inferior in activity to norfloxacin.