Synthesis of polyhydrazides by ring-opening polyaddition reaction of N,N′-biisomaleimide with dihydrazine and dihydrazides

The ring-opening polyaddition reaction of N,N′-biisomaleimide with a dihydrazine and dihydrazides was carried out in polar aprotic solvents at room temperature to afford a new class of polyhydrazides having inherent viscosities in the range of 0.1–0.5 in nearly quantitative yields. Almost all of the polyhydrazides were soluble in dimethylformamide, dimethyl sulfoxide, and other polar aprotic solvents. They did not show any clear melt temperature and began to decompose at around 200–300°C.     

Effect of overcrowding in mass spectra for six violanthrenes

The mass spectra of six highly purified violanthrene samples of class A—(benzo[rst]anthro[10,1,2-cde]pentaphen, benzo[rst]phenanthro[10,1,2-cde]pentaphene), class B—(benzo[rst]phenanthro[1,10,9-cde]pentaphene, dibenzo[a,rst]naphtho[8,1,2-cde]pentaphene) and class T—(tetrabenzo[a,cd,j,lm]perylene, tetrabenzo[de,hi,op,st]pentacene) were measured. The dependence of relative ion instensities for monovalent, divalent and trivalent ions [M]ⁱ⁺, [M – 2n]ⁱ⁺ and [M – 15]ⁱ⁺ (i = 1, 2, 3) showed clearly the effect of overcrowding in condensed aromatic rings, i.e. the number of H₂ molecules which are readily eliminated from the molecular ions is zero for class A, one for class B, and two for class T. These numbers are the same as the number of overcrowded hydrogen atom pairs for each class.     

Synthesis of polysulfone-sulfides by polyadditions of dithiols to divinyl sulfones

Polyadditions of 1,6-hexanedithiol and 1,10-decanedithiol to divinyl sulfone (DVS) in hexamethylphosphoramide in the presence of triethylamine or potassium fluoride afforded polysulfone-sulfides (IIIa and IIIb) with inherent viscosities as high as 0.8 dl/g. Polymerizations of other dithiols with DVS and distyryl sulfone (DSS) were also carried out, however, only low-molecular-weight polymers were obtained. A series of polymers derived from DVS were highly crystalline and soluble in hot dimethylacetamide and hot m-cresol, whereas a polymer from DSS was quite amorphous and showed excellent solubility in a wide range of solvents. Polymers IIIa and IIIb had melting temperature below 150°C.     

Synthesis and fluorescent properties of 2‐(1H‐benzimidazol‐2‐yl)‐phenol derivatives

A high yield one pot synthesis of 2‐(2‐hydroxyaryl)‐1H‐benzirrndazole derivatives by 2‐hydroxy aromatic aldehydes with aromatic 1,2‐diamines in the presence of manganese(III) acetate at room temperature was developed. Nine fluorescencers 2‐(2‐hydroxyaryl)‐1H‐benzirrndazoles with substituent(s) X (X = H, CH₃, CH₃O, Cl) and two fluorescencers 2‐(2‐hydroxyaryl)‐1H‐naphth[2,3‐d]imidazoles with substituent of H or Cl were prepared in 38–87% yield and the ultraviolet absorption and fluorescent spectra of the eleven compounds synthesized were measured in methanol. The fluorescent characteristics of the 2‐(2‐hydroxyaryl)benzimidazole derivatives prepared were investigated on the basis of excited‐state intramolecular proton transfer mechanism, Stokes' shift, quantum yield, and the relationship between fluorescent intensity and the substituents were derived.     

Absolute asymmetric photocyclization of isopropylbenzophenone derivatives using a cocrystal approach involving single-crystal-to-single-crystal transformation

Absolute asymmetric photocyclization of isopropylbenzophenone derivatives was achieved by means of a cocrystal approach. Three chiral salt crystals formed by carboxylic acid derivatives with achiral amines could be prepared by spontaneous crystallization. In the M-crystal of 4-(2,5-diisopropylbenzoyl)benzoic acid with 2,4-dichlorobenzylamine, a twofold helical arrangement occurs in a counterclockwise direction to generate the crystal chirality. Conversely, the clockwise helix exists alone in the P-crystal. Irradiation of the M-crystal at >290 nm caused highly enantioselective Norrish type II cyclization to give the (R,R)-cyclopentenol, (R)-cyclobutenol, and (R)-hydrol in a 6:3:1 molar ratio, resulting in successful absolute asymmetric synthesis, while irradiation at around 350 nm afforded the (R,R)-cyclopentenol as the sole product. The reaction proceeded via single-crystal-to-single-crystal transformation, and therefore the reaction path producing the (R,R)-cyclopentenol could be traced by X-ray crystallographic analysis before and after irradiation.     

Deoxydative thiation of 3-substituted pyridine N-oxides with 4-methoxytoluene-α-thiol: A divergent route to pyridinethiols

Synthesis of 3-substituted 2-pyridinethiols was achieved by thiation of pyridine N-oxides with 4-methoxytoluene-α-thiol in the presence of diethylcarbamoyl chloride followed by cleavage of the resulting sulfides. The ease of substitution was shown to be affected by nucleophilicity of the N-oxide oxygen. Addition of zinc bromide to the reaction, a need for triethylamine, decreased most of the yield for thiation products but the formation of 3-methoxy-2-methoxybenzylthiopyridine was only improved. A plausible mechanism of the substitution, particularly β-thiation to the N-oxide function, is discussed compared with the regiochemistry observed in the reaction with diethoxyphosphoryl chloride instead of diethylcarbamoyl chloride. The debenzylation to pyridinethiol was also found to be dependent on the electron-density in the pyridine ring.     

Synthesis and characterization of aromatic poly(ether sulfone)s containing pendant sodium sulfonate groups

Poly(ether sulfone)s containing pendant sodium sulfonate groups were prepared by the aromatic nucleophilic substitution reaction of 4,4′-dichlorodiphenylsulfone ( 1 ) and sodium 5,5′-sulfonylbis (2-chlorobenzenesulfonate) ( 2 ) with bisphenols ( 3 ) in the presence of potassium carbonate in N,N-dimethylacetamide. A new monomer 2 containing the sodium sulfonate groups was synthesized by the sulfonation of 1 with fuming sulfuric acid. The polycondensation proceeded smoothly at 170°C and produced the desired poly(ether sulfone)s containing the sodium sulfonate with inherent viscosities up to 1.2 dL/g. The polymers were quite soluble in strong acid, dipolar aprotic solvents, m-cresol, and dichloromethane. The thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 460°C in nitrogen atmosphere. Both the glass transition temperatures and hydrophilicity of the polymers increased with increasing their concentrations of sodium sulfonate groups. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of polyamides and polyimides containing phenoxathiin units

Novel polyimides and polyimides having phenoxathiin units have been prepared. Polyamides with inherent viscosities in the range of 0.5–2.9 were readily prepared by the polycondensations of phenoxathiin diamines with aromatic diacyl chlorides and of aromatic diamines with new phenoxathiin diacyl chlorides. The polyimides were synthesized from phenoxathiin diamines and pyromellitic dianhydride by using a two-step procedure. The polyamic acids which formed in the first step had inherent viscosities ranging from 1.0 to 1.6, and they were converted to the polyimides by thermal cyclodehydration. Some of the phenoxanthiin-containing polyamides were highly soluble in polar amide solvents and dimethyl sulfoxide. A series of novel polymers containing phenoxathiin units were much more thermostable than the corresponding polymers having open-chain diphenyl ether linkages.     

Salt resistivity of poly (4-vinyl benzoic acid) gel

Salt resistivity of poly (4-vinyl benzoic acid) (P4VBA) gel was investigated to compare with the super salt-resistivity that was found for poly (4-vinyl phenol)(P4VPh) gel containing an acidic proton and π-electron system. Poly(acrylic acid) (PAA) gel was also prepared and used as a reference gel containing only an acidic proton. P4VBA gel showed a moderate salt resistivity, which was less significant than that for P4VPh gel, in many kinds of inorganic salt solutions (MgCl₂, LiCl, NaCl, KCl, CsCl, KI, KSCN, Na₂SO₄). On the other hand, PAA gel showed a drastic deswelling in the presence of concentrated MgCl₂, LiCl, Na₂SO₄, and (NH₄)₂SO₄ solutions, and a significant swelling for KSCN solution. These contrastive behaviors between P4VBA and PAA gels strongly suggest that the combination of acidic proton and π-electron system is essential and necessary for polymer gels to be endowed with the salt resistivity.     

Orally active CCR5 antagonists as anti-HIV-1 agents 2: synthesis and biological activities of anilide derivatives containing a pyridine N-oxide moiety

In order to develop orally active CCR5 antagonists, we investigated 1-benzoxepine derivatives containing new polar substituents, such as phosphonate, phosphine oxide or pyridine N-oxide moieties, as replacements for the previously reported quaternary ammonium moiety. Among these compounds, the 2-(alpha-hydroxybenzyl)pyridine N-oxide 5e exhibited moderate CCR5 antagonistic activity and had an acceptable pharmacokinetic profile in rats. Subsequent chemical modification was performed and compound (S)-5f possessing the (S)-configuration hydroxy group was found to be more active than the (R)-isomer. Replacement of the 1-benzoxepine ring with a 4-methylphenyl group by a 1-benzazepine ring with a 4-[2-(butoxy)ethoxy]phenyl group enhanced the activity in the binding assay. In addition, introduction of a 3-trifluoromethyl group on the phenyl group of the anilide moiety led to greatly increased activity in the HIV-1 envelope-mediated membrane fusion assay. In particular, compound (S)-5s showed the most potent CCR5 antagonistic activity (IC(50)=7.2 nM) and inhibitory effect (IC(50)=5.4 nM) in the fusion assay, together with good pharmacokinetic properties in rats.