A novel thin-layer amperometric detector based on chemically modified ring-disc electrode and its application for simultaneous measurements of nitric oxide and nitrite in rat brain combined with in vivo microdialysis

A novel thin-layer amperometric detector (TLAD) based on chemically modified ring-disc electrode and its application for simultaneous measurements of nitric oxide (NO) and nitrite (NO₂⁻) in rat brain were demonstrated in this work. The ring-disc electrode was simultaneously sensitive to nitric oxide (NO) and nitrite (NO₂⁻) by modifying its inner disc with electropolymerized film of cobalt(II) tetraaminophthalocyanine (polyCoTAPc)/Nafion and its outer ring with poly(vinylpyridine) (PVP), respectively. The ring-disc electrode was used to constitute a novel TLAD in radial flow cell for simultaneous measurements of NO and NO₂⁻ in rat brain combined with techniques of high performance liquid chromatography (HPLC) and in vivo microdialysis. It was found that the basal concentration of NO in the caudate nucleus of rat brain is lower than 1.0×10⁻⁷ mol l⁻¹, NO₂⁻ concentration is 5.0×10⁻⁷ mol l⁻¹ and NO exists in brain maybe mainly in the form of its decomposed product.     

Radiation-induced copolymerizations of perfluorovinyl acetic acid and its methyl ester with α-olefin

Homopolymerizations and copolymerizations of perfluorovinyl acetic acid (FVA) and its methyl ester (MFVA) were carried out by γ radiation at a temperature of 25°C, a dose rate of 1 × 10⁶ rad/hr, and FVA/α-olefin and MFVA/α-olefin ratios of 10/90-90/10 in the monomer mixture. FVA and MFVA gave small quantities of brown and greasy low-molecular-weight homopolymers. The polymerization rates of both FVA and MFVA were extremely small, as shown by the maximum G value of monomer consumption of 12. FVA and MFVA reacted with α-olefin to form waxlike copolymers. The copolymerization rates of both FVA and MFVA with α-olefin were remarkably larger than those of the homopolymerizations, particularly with ethylene. The polymer compositions of FVA/ethylene or MFVA/ethylene was nearly 1/2 over a wide range of the monomer compositions. The Mayo–Lewis method gave negative r₁ (FVA) and r₁ (MFVA). The polymer composition curves could be well interpreted by introducing the penultimate model.     

Resonance Raman scattering with a forbidden but vibronically allowed electronic transition: Excitation profiles of combinations and overtones of copper tetraphenylporphyrin in the Q-band resonance

Resonance Raman scattering with the Q band of CuTPP shows a peculiar intensity pattern; bands due to combinations and overtones are strong, whereas the corresponding fundamentals are very weak. By a quantitative analysis of excitation profiles, this phenomenon has been fully accounted for on the basis of the vibronic theory of Raman intensities. Vibronic coupling parameters between the Q and B states of CuTPP have been obtained.     

Polymeric organosilicon systems. XVII. Synthesis and photochemical and conducting properties of poly[o-and m-(disilanylene)phenylene]s

Poly[o-(tetramethyldisilanylene)phenylene] ( 2a ), poly[o-(1,2-dimethyldiphenyldisilanylene)-phenylene] ( 2b ), poly[m-(tetramethyldisilanylene)phenylene] ( 2c ), and poly[m-(1,2-dimethyldiphenyldisilanylene)phenylene] ( 2d ) were prepared by the sodium condensation reaction of the corresponding 1,2-and 1,3-bis (chlorosilyl)benzenes in toluene. Irradiation of thin films of 2a-2d in air resulted in a rapid decrease of absorption maxima in the ultraviolet region. The photolysis of 2b and 2d in benzene afforded photodegradation products with low molecular weights. When thin films of 2b and 2d were doped with antimony pentafluoride vapor, films which have conductivities of semi-conductor level were obtained. © 1993 John Wiley & Sons, Inc.     

Structural assignment of n3-acylated uridine derivatives by means of 13c nmr spectroscopy

Diisopropylethylamine was effective as a base for acylation of 2′,3′,5′-tri-O-acetyluridine with various acid chlorides. The ¹³C NMR spectra of the products and related compounds showed clearly that the acyl groups intoduced to the uracil moiety are attached to the N³-nitrogen.     

The practical synthesis of a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246)

The synthetic route for a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246), was established by the coupling of optically active components, the bromohydrin 14 and the amine 24. We now describe the practical synthesis of these two optically active components. Bromohydrin 14 was obtained by the asymmetric borane reduction of the prochiral phenacyl bromide 13 using a catalyst prepared from aluminum triethoxide and a chiral amino alcohol. The other optically active component 24 was prepared from (S)-AMT.     

Interpretation of structure formation during the sol-gel transition of a resorcinol-formaldehyde solution by population balance

Growth of colloidal particles formed during the sol-gel transition of a resorcinol-formaldehyde (RF) solution was simulated based on the population balance equation by using the discrete-sectional model (DSM). During the early stage of the sol-gel transition, the transient change of sizes of colloidal particles estimated by this method agreed well with the previous experimental observation by dynamic light scattering (DLS), which confirmed the influence of the catalyst concentration of a starting RF solution on the growth rate of the particles. From the size distribution of colloidal particles predicted at the gelation time, the surface area of a RF hydrogel after the completion of the sol-gel transition was estimated, which coincided with the BET surface area of a RF aerogel because the porous structure of a hydrogel was maintained and few micropores were formed during supercritical drying.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Asymmetric total syntheses of (+)-mycoepoxydiene and related natural product (-)-1893A: application of one-pot ring-opening/cross/ring-closing metathesis to construct their 9-oxabicyclo[4.2.1]nona-2,4-diene skeleton

The total syntheses of (+)-mycoepoxydiene and (-)-1893A have been completed. The present synthetic strategy features the use of one-pot ring-opening/cross metathesis (ROM/CM) followed by a ring-closing metathesis (RCM) reaction, allowing for the concise construction of the 9-oxabicyclo[4.2.1]nona-2,4-diene framework from a 7-oxabicyclo[2.2.1]hept-2-ene derivative and 1,3-butadiene. The sequential metathesis product was converted into (+)-mycoepoxydiene through the oxidative rearrangement of a furfuryl alcohol to a pyranone, thereby establishing its absolute stereochemistry. From the common intermediate, a structurally related natural product (-)-1893A was also synthesized via the vinylogous aldol reaction.