Highly porous magnetite/graphene nanocomposites for a solid-state electrochemiluminescence sensor on paper-based chips

Graphene-nanosheet-based highly porous magnetite nanocomposites (GN-HPMNs) have been prepared using a simple solvothermal method and used as an immobilization matrix for the fabrication of a solid-state electrochemiluminescence (ECL) sensor on paper-based chips. Highly porous Fe₃O₄ nanocrystal clusters were coated with acrylate and wrapped tightly on the skeleton of graphene nanosheets. The structures and sizes of the GN-HPMNs could be tuned by varying the proportions of the solvents ethylene glycol and diethylene glycol. Then, the relatively highly porous ones with an average diameter of about 65 nm were combined with Nafion to form composite films on an electrode surface for immobilization of Ru(bpy)₃ ²⁺ (bpy is 2,2′-bipyridine). Because of their porosity, negatively charged surface, and cooperative characteristics of magnetic nanomaterials and graphene, under an external magnetic field, the GN-HPMNs ensured effective immobilization, excellent electron transfer, and long-term stability of Ru(bpy)₃ ²⁺ in the composite film. The sensor developed exhibited excellent reproducibility with a relative standard deviation of 0.65 % for 30 continuous cycles. It was found to be much more favorable for detecting compounds containing tertiary amino groups and DNAs with guanine and adenine. A detection limit (signal-to-noise ratio of 3) of 5.0 nM was obtained for tripropylamine. As an application example, 0.5 nM single-nucleotide mismatch could be detected. This was the first attempt to introduce magnetic nanomaterials and an external magnetic field into paper-based chips. The sensor developed has the advantages of high sensitivity, good stability, and wide potential applicability as well as simplicity, low cost, and good disposability.

Simultaneous determination of 11 related impurities in propofol by gas chromatography/tandem mass spectrometry coupled with pulsed splitless injection technique

A variety of related impurities, including starting materials, process impurities, and degradation products, can be detected in propofol. In this article, a sensitive and selective GC‐MS/MS method using pulsed splitless injection technique for the determination of 11 main related impurities in propofol in one chromatogram is investigated. This method is extensively validated for its linearity, recovery, precision, LOD, and LOQ, and is able to detect trace‐level related impurities (LOD = 0.2–5.6 μg/g) in propofol bulk drug. Stressed tests proposed that oxidative degradation, photolytic degradation, and heat are the main causes for the formation of degradation products in propofol.     

Simultaneous quantification of 11 isoquinoline alkaloids in Corydalis impatiens (Pall.) Fisch by HPLC

Isoquinoline alkaloids are the primary active ingredients of Corydalis, but an analytical method for quality assessment of the active ingredients in Corydalis impatiens (Pall). Fisch has not been reported. A new, simple, and multiple‐component quantification method was developed for the simultaneous quantification of 11 isoquinoline alkaloids including capnoidine, chelianthifoline, bicuculline, protopine, isoapocavidine, apocavidine, cavidine, tetrahydroepiberberine, ochotensimine, tetrahydrocoptisine, and tetrahydrocorysamine in C. impatiens. Separation of the isoquinoline alkaloids was performed on a RP C₁₈ column (150 × 4.6 mm, 5 μm) with potassium dihydrogen phosphate buffer (pH 2.5, adjusted by phosphoric acid)/acetonitrile (53:47, v/v) containing 0.3% sodium dodecyl sulfonate. The flow rate and detection wavelength were set at 1 mL/min and 295 nm, respectively. Full validation of the assay was carried out including linearity, precision, accuracy, stability, LOD, and limit of quantitation. All calibration curves showed a good linear relationship (r > 0.999) in test range. The results demonstrated that the developed method was reliable, rapid, and specific. Six batches of C. impatiens samples from different sources were determined using the established method. The contents of alkaloids ranged from 11.68 to 351.83 μg/g. This method can be applied for quality evaluation and control of C. impatiens. Eleven isoquinoline alkaloids were first reported on simultaneous determination with HPLC.     

Graphene‐based solid‐phase extraction disk for fast separation and preconcentration of trace polycyclic aromatic hydrocarbons from environmental water samples

Graphene has great potentials for the use in sample preparation due to its ultra high specific surface area, superior chemical stability, and excellent thermal stability. In our work, a novel graphene‐based SPE disk was developed for separation and preconcentration of trace polycyclic aromatic hydrocarbons from environmental water samples. Based on the strong π–π stacking interaction between the analytes and graphene, the analytes extracted by graphene were eluted by cyclohexane and then determined by GC‐MS. Under the optimized conditions, high flow rate (30 mL/min) and sensitivity (0.84–13 ng/L) were achieved. The proposed method was successfully applied to the analysis of real environmental water samples with recoveries ranging from 72.8 to 106.2%. Furthermore, the property of anticlogging and reusability was also improved. This work reveals great potentials of graphene‐based SPE disk in environmental analytical.     

An interesting two‐phase solvent system and its use in preparative isolation of aconitines from aconite roots by counter‐current chromatography

Two‐phase solvent system plays crucial role in successful separation of organic compounds using counter‐current chromatography (CCC). An interesting two‐phase solvent system, composed of chloroform/ethyl acetate/methanol/water, is reported here, in which both phases contain sufficient organic solvents to balance their dissolving capacities. Adjusting the solvent system to get satisfactory partition coefficients (K values) for target compounds becomes relatively simple. This solvent system succeeded in sample preparation of aconitine (8.07 mg, 93.69%), hypaconitine (7.74 mg, 93.17%), mesaconitine (1.95 mg, 94.52%) from raw aconite roots (102.24 mg, crude extract), benzoylmesaconine (34.79 mg, 98.67%) from processed aconite roots (400.01 mg, crude extract), and yunaconitine (253.59 mg, 98.65%) from a crude extract of Aconitum forrestii (326.69 mg, crude extract).     

3D-QSAR and docking studies on 2-arylbenzoxazole and linker-Y transthyretin amyloidogenesis inhibitors

Transthyretin (TTR), a plasma protein with a tetramer structure, could form amyloid fibril associated with several human diseases through the dissociation of tetramer and the misfolding of monomer. These amyloidogenesis can be inhibited by small molecules which bind to the central channel of TTR. A number of small molecules like 2-arylbenzoxazoles (ABZ) analogues are proposed as promising therapeutic strategy to treat amyloidosis. In this work, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) three-dimensional quantitative structure-activity relationship (3D-QSAR) and docking studies were performed on series of 2-arylbenzoxazoles (ABZ) and linker-Y analogues to investigate the inhibitory activities of TTR amyloidogenesis at atomic level. Significant correlation coefficients for ABZ series (CoMFA, r ² = 0.877, q ² = 0.431; CoMSIA, r ² = 0.836, q ² = 0.447) and those for linker-Y series (CoMFA, r ² = 0.828, q ² = 0.522; CoMSIA, r ² = 0.800, q ² = 0.493) were obtained, and the generated models were validated using test sets. In addition, docking studies on 6 compounds binding to TTR were performed to analyze the forward or reverse binding mode and interactions between molecules and TTR. These results from 3D-QSAR and docking studies have great significance for designing novel TTR amyloidogenesis inhibitors in the future.     

Catalytic wet air oxidation of aromatic compounds: degradation in molybdovanadophosphoric polyoxometalates micellar system under room temperature conditions

Catalytic wet air oxidation process, enable to eliminate organic pollutants with non toxic by-product formation, was investigated in micellar system under room condition. Degradation of a series of aromatic compounds, including aromatic hydrocarbons, benzyl alcohol, benzaldehyde, benzoic acid, and some N-containing compounds was carried out based on molybdovanadophosphoric polyoxometalates [(C₁₆H₃₃)N(CH₃)₃]_3+x PV _x Mo_12?x O₄₀ (x = 1, 2, 3) catalysts and surfactants. Outstanding results (60–96 % degradation efficiencies) were achieved for most of the tested substrates. And the POM micellar catalysts have an excellent stability and can be used as heterogeneous catalysts for about six times.     

Antimicrobial,anticancer and DNA binding studies of transition metal(II) complexes containing 2-phenyl-4-selenazole carboxylic acid

Science China Chemistry - Three novel transition metal complexes [ML2(phen)]·H2O (M= Mn, Co, Zn; HL= C10H7O2NSe, 2-phenyl-4-selenazole carboxylic acid, phen= 1,10-phenanthroline) 1～3...