Sheath-assisted focusing of microparticles on lab-on-a-chip platforms

Lab-on-a-chip (LOC) technologies can take advantage of sheath flows for particle/cell focusing before sensing or sorting. The integration of focusing with other microscale manipulation techniques (e.g., sorting) creates a trade-off between the throughput of the device and its performance. Therefore, exploring the effective parameters for cells/particles focusing enables us to improve the desired output of LOC devices. A common configuration for sheath-assisted focusing is Y junctions, which are parametrically studied in this paper. First, a computational model was developed and validated by comparing it with our experimental results. Using COMSOL Multiphysics modeling, the effects of multiple parameters were studied. These parameters include the sheath flow ratio (sheath flow over total flow), width ratio (width of the sheath inlet over the total width), junction angles, and particle size on the focusing width and the distribution of the particles within the focusing region. Then, the numerical data were used to develop two generalized linear models to predict the focusing width of the particles and the standard deviation of the position of the particles. The results showed that the focusing width is greatly impacted by the sheath flow rate ratio. Further, the standard deviation of the position of the particles, which represents the concentration of the particles, is mostly dependent on the flow rate ratio, width ratio, and particle size. Our results provide a better understanding of how the device geometrical and operational factors affect the position of the particles in the development of high-performance on-chip sensing and sorting of both cells and particles.     

On the Degeneration, Regeneration and Braid Monodromy of T×T

This paper is the first in a series of three papers concerning the surface T×T. Here we study the degeneration of T×T and the regeneration of its degenerated object. We also study the braid monodromy and its regeneration.     

Preparation and properties of novel soluble aromatic polyimides from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing triphenylamine unit were prepared by two different methods, i.e., a conventional two-step method starting from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides and the one-step thioanhydride method starting from the aromatic diamine and aromatic tetracarboxylic dithioanhydrides. Both procedures yielded high-molecular-weight polyimides with inherent viscosities of 0.47–1.17 dL/g. Some of these polymers were soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, m-cresol, and pyridine. All the polyimides afforded transparent, flexible, and tough films, and the color varied from pale yellow to dark red, depending markedly on the tetracarboxylic acid components. The glass transition temperatures (T_gs) of these polyimides were in the range of 287–331°C and the 10% weight loss temperatures were above 520°C in air. The polyimides prepared by the one-step method exhibited better solubility in organic solvents and had somewhat lower T_gs than the polymers prepared by a conventional two-step method.     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002     

Screening, substrate specificity and stereoselectivity of yeast strains, which reduce sterically hindered isopropyl ketones

Towards the synthesis of sterically hindered optically active secondary alcohol 2, yeast strains (Candida floricola IAM 13115 and Trichosporon cutaneum IAM 12206) with si-face hydride attack on isopropyl phenylsulfonylmethyl ketone 1 were developed by screening. Strains with complementary re-facial selectivity (Pichia angusta IAM 12895 and Pichia minuta IAM 12215) were also found. Based on the substrate specificity studies of these four strains, microbial reduction was applied to the synthesis of (3S,5S)-2,6-dimethyl-3,5-heptanediol 12a.     

Aliphatic sulfates released from Daphnia induce morphological defense of phytoplankton: isolation and synthesis of kairomones

Six aliphatic sulfates, kairomones released from a crustacean Daphnia pulex induce morphological changes of phytoplankton Scenedesmus gutwinskii at ppb (10⁻⁹ g/mL) concentrations.     

Study of some reactions of ethyl 4-phenyl-3-benzoyl-2-pyrazoline-5-carboxylate

Several reactions of the pyrazoline 1a were investigated. With bromine water, potassium permanganate, hydrogen peroxide, or potassium hydroxide, different pyrazole derivatives were formed. While the reaction with hydroxylamine or some hydrazines gave the corresponding pyrazoline Schiff bases, with aroylhydrazines, pyrazole Schiff bases were formed.     

Synthesis of Substituted Pyrazino[5,6-b]pyrimidine and Some Indole Derivatives

Refluxing dimethyl acetylenedicarboxylate (DMAD) or 1,2-dibenzoylacetylene with isatin-3-thiosemicarbazone or isatin-3-thiocarbohydrazone in methanol produced 3-substituted oxindoles in good yields. Reaction of equimolecular amounts of 5,6-diamino-urasil-solfate, trans-(1R,2R)-diaminocyclohexane, and 3,4-diamino-1,2,4-triazol-5-methyl hydrochlorid with isatin in ethanol (85%) afforded tetracyclic ring systems and ring-opened products in mild reaction conditions.     

Facile Synthesis of Luminescent Ir–Pt–Ir Trimetallic Complexes

A new class of luminescent, heterotrimetallic supramolecular constructs partnering two bis-cyclometalated iridium centers with a diimine platinum acetylide center is introduced. Whereas most supramolecular constructs featuring cyclometalated iridium involve elaborate bridging ligands and are prepared under forcing conditions with low to moderate yields, the three Ir–Pt–Ir complexes described here are prepared at room temperature from simple precursors and isolated in near-quantitative yields. ESI-MS, NMR spectroscopy, and diffusion ordered spectroscopy confirm the identity and homogeneity of the trimetallic products. In comparison with monometallic model complexes, analysis of UV/Vis absorption, steady-state photoluminescence and time-resolved emission reveals the impacts of supramolecular assembly on the photophysical properties. UV/Vis absorption and cyclic voltammetry suggest perturbation of some frontier orbital energies as a result of assembly, and the emission spectra and lifetimes reveal efficient excited-state energy transfer via a Dexter mechanism, and show that the site of luminescence (platinum or iridium) depends on the identity of the cyclometalating ligand bound to iridium.     

Influence of Alkoxy Chain Length on the Properties of Two-Dimensionally Expanded Azulene-Core-Based Hole-Transporting Materials for Efficient Perovskite Solar Cells

A series of two-dimensionally expanded azulene-core-based π systems have been synthesized with different alkyl chain lengths in the alkoxy moieties connected to the partially oxygen-bridged triarylamine skeletons. The thermal, photophysical, and electronic properties of each compound were evaluated to determine the influence of the alkyl chain length on their effectiveness as hole-transporting materials (HTMs) in perovskite solar cells (PSCs). All the synthesized molecules showed promising material properties, including high solubility, the formation of flat and amorphous films, and optimal alignment of energy levels with perovskites. In particular, the derivatives with methyl and n-butyl in the side chains retained amorphous stability up to 233 and 159 °C, respectively. Such short alkoxy chains also resulted in improved electrical device properties. The PSC device fabricated with the HTM with n-butyl side chains showed the best performance with a power conversion efficiency of 18.9 %, which compares favorably with that of spiro-OMeTAD-based PSCs (spiro-OMeTAD=2,2′,7,7′-tetrakis[N,N-bis(p-methoxyphenyl)amino]-9,9′-spirobifluorene).