Mapping the influence of molecular structure on rates of electron transfer using direct measurements of the electron spin-spin exchange interaction

The spin-spin exchange interaction, 2J, in a radical ion pair produced by a photoinduced electron transfer reaction can provide a direct measure of the electronic coupling matrix element, V, for the subsequent charge recombination reaction. We have developed a series of dyad and triad donor-acceptor molecules in which 2J is measured directly as a function of incremental changes in their structures. In the dyads the chromophoric electron donors 4-(N-pyrrolidinyl)- and 4-(N-piperidinyl)naphthalene-1,8-dicarboximide, 5ANI and 6ANI, respectively, and a naphthalene-1,8:4,5-bis(dicarboximide) (NI) acceptor are linked to the meta positions of a phenyl spacer to yield 5ANI-Ph-NI and 6ANI-Ph-NI. In the triads the same structure is used, except that the piperidine in 6ANI is replaced by a piperazine in which a para-X-phenyl, where X = H, F, Cl, MeO, and Me(2)N, is attached to the N' nitrogen to form a para-X-aniline (XAn) donor to give XAn-6ANI-Ph-NI. Photoexcitation yields the respective 5ANI(+)-Ph-NI(-), 6ANI(+)-Ph-NI(-), and XAn(+)-6ANI-Ph-NI(-) singlet radical ion pair states, which undergo subsequent radical pair intersystem crossing followed by charge recombination to yield (3)NI. The radical ion pair distances within the dyads are about 11-12 A, whereas those in the triads are about approximately 16-19 A. The degree of delocalization of charge (and spin) density onto the aniline, and therefore the average distance between the radical ion pairs, is modulated by the para substituent. The (3)NI yields monitored spectroscopically exhibit resonances as a function of magnetic field, which directly yield 2J for the radical ion pairs. A plot of ln 2J versus r(DA), the distance between the centroids of the spin distributions of the two radicals that comprise the pair, yields a slope of -0.5 +/- 0.1. Since both 2J and k(CR), the rate of radical ion pair recombination, are directly proportional to V(2), the observed distance dependence of 2J shows directly that the recombination rates in these molecules obey an exponential distance dependence with beta = 0.5 +/- 0.1 A(-)(1). This technique is very sensitive to small changes in the electronic interaction between the two radicals and can be used to probe subtle structural differences between radical ion pairs produced from photoinduced electron transfer reactions.     

2‐{[(4‐Methylphenyl)sulfonyl]amino}phenyl 4‐methylbenzenesulfonate

The title compound, C₂₀H₁₉NO₅S₂, crystallizes as an almost 2:1 mixture of two molecular orientations (described as Orient‐A and Orient‐B). The consequences of these two orientations is the formation of three types of N—H...O hydrogen‐bonded dimers in which the (Orient‐A + Orient‐A) dimers are likely to be the most stable, while the mixed (Orient‐A + Orient‐B) dimers are more frequent. Extra interactions in the form of C—H...O and C—H...π interactions act to further stabilize these dimers and probably allow the less energetically favourable (Orient‐A + Orient‐B) and (Orient‐B + Orient‐B) hydrogen‐bonded dimers to exist by preventing their conversion to (Orient‐A + Orient‐A)‐only hydrogen‐bonded dimers during the crystal‐growth process.     

Large-scale fabrication of wafer-size colloidal crystals, macroporous polymers and nanocomposites by spin-coating

This paper reports a simple spin-coating technique for rapidly fabricating three types of technologically important materials--colloidal crystal, macroporous polymer, and polymeric nanocomposite, each with high crystalline qualities and wafer-scale sizes. Dispersion of monodisperse silica colloids in triacrylate monomers is spin-coated onto a variety of substrates. Shear-induced ordering and subsequent polymerization lead to the formation of three-dimensionally (3D) ordered colloidal crystals trapped inside a polymer matrix. The thickness of as-synthesized colloidal crystal-polymer nanocomposite is highly uniform and can be controlled simply by changing the spin speed and time. Selective removal of the polymer matrix and silica spheres lead to the formation of large-area colloidal crystals and macroporous polymers, respectively. The wafer-scale process is compatible with standard semiconductor microfabrication, as multiple micrometer-sized patterns can be created simultaneously for potential device applications. Normal-incidence transmission spectra in the visible and near-infrared regions show distinct peaks due to Bragg diffraction from 3D ordered structures. The spin-coating process opens a new route to the fundamental studies of shear-induced crystallization, melting and relaxation.     

Excited-state characters and dynamics of [W(CO)(5)(4-cyanopyridine)] and [W(CO)(5)(piperidine)] studied by picosecond time-resolved IR and resonance Raman spectroscopy and DFT calculations: roles of W --> L and W --> CO MLCT and LF excited states revised

The characters, dynamics, and relaxation pathways of low-lying excited states of the complexes [W(CO)(5)L] [L = 4-cyanopyridine (pyCN) and piperidine (pip)] were investigated using theoretical and spectroscopic methods. DFT calculations revealed the delocalized character of chemically and spectroscopicaly relevant molecular orbitals and the presence of a low-lying manifold of CO pi-based unoccupied molecular orbitals. Traditional ligand-field arguments are not applicable. The lowest excited states of [W(CO)(5)(pyCN)] are W --> pyCN MLCT in character. They are closely followed in energy by W --> CO MLCT states. Excitation at 400 or 500 nm populates the (3)MLCT(pyCN) excited state, which was characterized by picosecond time-resolved IR and resonance Raman spectroscopy. Excited-state vibrations were assigned using DFT calculations. The (3)MLCT(pyCN) excited state is initially formed highly excited in low-frequency vibrations which cool with time constants between 1 and 20 ps, depending on the excitation wavelength, solvent, and particular high-frequency nu(CO) or nu(CN) mode. The lowest excited states of [W(CO)(5)(pip)] are W --> CO MLCT, as revealed by TD-DFT interpretation of a nanosecond time-resolved IR spectrum that was measured earlier in a low-temperature glass (Johnson, F. P. A.; George, M. W.; Morrison, S. L.; Turner, J. J. J. Chem. Soc., Chem. Commun. 1995, 391-393). MLCT(CO) excitation involves transfer of electron density from the W atom and, to a lesser extent, the trans CO to the pi orbitals of the four cis CO ligands. Optical excitation into MLCT(CO) transition of either complex in fluid solution triggers femtosecond dissociation of a W-N bond, producing [W(CO)(5)(solvent)]. It is initially vibrationally excited both in nu(CO) and anharmonicaly coupled low-frequency modes. Vibrational cooling occurs with time constants of 16-22 ps while the intramolecular vibrational energy redistribution from the v = 1 nu(CO) modes is much slower, 160-220 ps. No LF excited states have been found for the complexes studied in a spectroscopically relevant range up to 6-7 eV. It follows that spectroscopy, photophysics, and photochemistry of [W(CO)(5)L] and related complexes are well described by an interplay of close-lying MLCT(L) and MLCT(CO) excited states. The high-lying LF states play only an indirect photochemical role by modifying potential energy curves of MLCT(CO) states, making them dissociative.     

Highly selective palladium catalyzed kinetic resolution and enantioselective substitution of racemic allylic carbonates with sulfur nucleophiles: asymmetric synthesis of allylic sulfides,allylic sulfones,and allylic alcohols

We describe the highly selective palladium catalyzed kinetic resolutions of the racemic cyclic allylic carbonates rac-1 a-c and racemic acyclic allylic carbonates rac-3 aa and rac-3 ba through reaction with tert-butylsulfinate, tolylsulfinate, phenylsulfinate anions and 2-pyrimidinethiol by using N,N'-(1R,2R)-1,2-cyclohexanediylbis[2-(diphenylphosphino)-benzamide] (BPA) as ligand. Selectivities are expressed in yields and ee values of recovered substrate and product and in selectivity factors S. The reaction of the cyclohexenyl carbonate 1 a (>/=99 % ee) with 2-pyrimidinethiol in the presence of BPA was shown to exhibit, under the conditions used, an overall pseudo-zero order kinetics in regard to the allylic substrate. Also described are the highly selective palladium catalyzed asymmetric syntheses of the cyclic and acyclic allylic tert-butylsulfones 2 aa, 2 b, 2 c, 2 d and 4 a-c, respectively, and of the cyclic and acyclic allylic 2-pyrimidyl-, 2-pyridyl-, and 4-chlorophenylsulfides 5 aa, 5 b, 5 ab, 6 aa-ac, 6 ba and 6 bb, respectively, from the corresponding racemic carbonates and sulfinate anions and thiols, respectively, in the presence of BPA. Synthesis of the E-configured allylic sulfides 6 aa, 6 ab, 6 ac and 6 bb was accompanied by the formation of minor amounts of the corresponding Z isomers. The analogous synthesis of allylic tert-butylsulfides from allylic carbonates and tert-butylthiol by using BPA could not be achieved. Reaction of the cyclopentenyl esters rac-1 da and rac-1 db with 2-pyrimidinethiol gave the allylic sulfide 5 c having only a low ee value. Similar results were obtained in the case of the reaction of the cyclohexenyl carbonate rac-1 a and of the acyclic carbonates rac-3 aa and rac-3 ba with 2-pyridinethiol and lead to the formation of the sulfides 5 ab, 6 ab, and 6 bb, respectively. The low ee values may be ascribed to the operating of a "memory effect", that is, both enantiomers of the substrate give the substitution product with different enantioselectivities. However, in the reaction of the racemic carbonate rac-1 a as well as of the highly enriched enantiomers 1 a (>/=99 % ee) and ent-1 a (>/=99 % ee) with 2-pyrimidinethiol the ee values of the substrates and the substitution product remained constant until complete conversion. Similar results were obtained in the reaction of the cyclic carbonates rac-1 a, ent-1 a (>/=99 % ee) and ent-1 c (>/=99 % ee) with lithium tert-butylsulfinate. Thus, in the case of rac-1 a and 2-pyrimidinthiol and tert-butylsulfinate anion as nucleophiles the enantioselectivity of the substitution step is, under the conditions used, independent of the chirality of the substrate; this shows that no "memory effect" is operating in this case. Hydrolysis of the carbonates ent-1 a-c, ent-3 aa and ent-3 ba, which were obtained through kinetic resolution, afforded the enantiomerically highly enriched cyclic allylic alcohols 9 a-c (>/=99 % ee) and acyclic allylic alcohols 10 a (>/=99 % ee) and 10 b (99 % ee), respectively.     

Built to order: molecular tinkertoys from the [Re(6)(mu(3)-Se)(8)](2+) clusters

Ligand substitution of [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CH(3)CN)](SbF(6))(2) (1) with pyridyl-based ligands, 2,4,6-tri-4-pyridyl-1,3,5-triazine (L1) and 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (L2), produced respectively the star-shaped tricluster (T1) and tetracluster (T2) arrays, wherein three (T1) and four (T2) units of the [Re(6)(mu(3)-Se)(8)](2+) core-containing clusters are interconnected by the corresponding bridging ligands. These novel supramolecular assemblies were characterized by a combination of NMR ((1)H and (31)P) spectroscopy, ESI-MS, and microanalysis. The molecular and solid-state structures of T1 have also been established by single-crystal X-ray diffraction.     

Diastereoselective addition of diethyl difluoromethylphosphonate to enantiopure sulfinimines: synthesis of α,α-difluoro-β-aminophosphonates, phosphonic acids, and phosphonamidic acids

Addition of diethyl lithiodifluoromethylphosphonate to enantiomerically pure aromatic, heteroaromatic, and aliphatic aldehyde-derived sulfinimines afforded N-sulfinyl α,α-difluoro-β-aminophosphonates with generally good enantioselectivity and in high yield. The reaction with acetophenone-derived sulfinimine resulted in the formation of the addition product with high diastereoselectivity and in only moderate yield. A two-step deprotection involving treatment of diastereomerically pure N-sulfinyl α,α-difluoro-β-aminophosphonates with trifluoroacetic acid in EtOH followed by refluxing with 10 N HCl provided enantiopure α,α-difluoro-β-aminophosphonates and α,α-difluoro-β-aminophosphonic acids. The N-Cbz derivative of (R)-2-amino-1,1-difluoro-2-phenylethylphosphonate was a convenient starting point for the preparation of corresponding difluorophosphonate monoester, difluorophosphonic acid, and difluorophosphonamidic acid. At 21 °C difluorophosphonamidic acid was stable in aqueous solution at pH above 5.     

Verbindungen A3M5 (A = Erdalkalimetall,M = Triel/Tetrel): Eine Fallstudie zur strukturellen und elektronischen Stabilität polarer intermetallischer Phasen

Compounds A₃M₅ (A = alkaline earth, M = triel/tetrel): A Case Study on Structural and Electronic Factors Stabilizing Polar Intermetallics Starting from the non electron precise binary compounds Ca₃Ga₅/Sr₃In₅ (Hf₃Ni₂Si₃ type) and Ba₃Al₅ at one hand and Ba₃Pb₅ (Pu₃Pd₅ type) at the other hand, a series of new ternary intermetallics of the general formula A₃M₅ (A: alkaline earth, M: triel/tetrel) has been synthesized, structurally characterized and studied by band structure calculations. The chemical substitution of M in A₃M₅ allows, via the continous variation of the radius ratio (r_A:r_M) and the valence electron number (VE/M) the detection of the geometrically and electronically determined stability ranges of the three structure types formed by the binary compounds. At values of r_A:r_M between 1.30 and 1.52 in the triel rich region of A₃M′_xM″_5?x the Hf₃Ni₂Si₃ type (orthorhombic, space group Cmcm) is formed: In Ca₃Ga₅ up to 1.8 Ga can be substituted by Al, in Sr₃In₅ similar amount of In can be replaced by either Al or Ga. The mixed trielide Sr₃Al_2.6Ga_2.4 (a = 468.4(1), b = 1132.5(1), c = 1570.0(2) pm, R1 = 0.0261) can be obtained, although both corresponding binary phases are not known. At larger values of the ratio r_A/r_M as in Ba₃Al₃Ga₂ (Ba₃Al₅ type, hexagonal, space group P6₃/mmc, a = 598.9(1), c = 1456.0(3) pm, R1 = 0.0353) layers of condensed M₅ building blocks with Al‐Al partial bonds are formed. Substituting one In position in Sr₃In₅ against Pb results in the isotypic, but electron precise Zintl compound Sr₃In₄Pb (a = 506.1(1), b = 1191.8(3), c = 1650.2(4) pm, R1 = 0.0286), where the Fermi level in shifted into a distinct minimum of the density of states. Conversely, at the tetrele rich end of the series A₃In_xPb_5?x, characterized by compounds of the Pu₃Pd₅ type (orthorhombic, space group Cmcm) with almost isolated nido clusters M₅, a minimum of the DOS can be reached, if Pb is partially substituted by In (A₃In_xPb_5?x with A = Sr/Ba: x = 0.7/0.6; a = 1084.6(2)/1118.6(2), b = 867.1(2)/904.4(1), c = 1104.8(2)/1133.9(2) pm, R1 = 0.0394/0.0434).     

Intramolecular charge-transfer interactions in pi-extended tetrathiafulvalene derivatives

New electron-donor (D)-electron-acceptor (A) TTF architectures are presented in which two electron-donating 1,3-dithiole moieties are connected by a pi bridge to the weak electron-accepting quinoxaline moiety (D-pi-A compounds 9a and 9b and also two 1,3-dithiole-2-ylidene moieties are connected by a pi bridge to the electron-accepting thieno[3,4-b]quinoxaline bridge (D-pi-A-pi-D compounds 12a-c). There are through-bond intramolecular charge-transfer (ICT) interactions, predicted in theoretical calculations, and confirmed by UV-vis spectroscopy and cyclic voltammetry measurements. This work constitutes the first use of quinoxalines as electron-accepting moieties in D-pi-A compounds.