Microwave-assisted synthesis and characterization of phthalocyanines substituted with azo compound containing eugenol moiety

The new metallophthalocyanines (Co, Ni, Cu, and Zn) substituted with azo compound containing eugenol moiety are described. Firstly, azo compound (I) containing eugenol moiety was synthesized by treating eugenol with p-hydroxyaniline. Then phthalonitrile compound (1) was synthesized by microwave-assisted synthesis method. The purification of phthalonitrile compound (1) was carried out by column chromatographic separation. Intramolecular hydrogen bonding in the azo compound (I) prevent base-catalyzed nucleophilic aromatic substitution of OH group belongs eugenol. At the last step, metallophthalocyanines (1a, 1b, 1c, and 1d) were synthesized by the microwave irradiation. The microwave-assisted synthesis method reduces reaction times and enhances the yield of the reactions. All phthalocyanine compounds are soluble in DMF and DMSO. The structures were confirmed by elemental analysis, ¹H NMR, ¹³C NMR, UV/Vis, IR and Mass spectra.     

Single step sol-gel made silver chloride on Titania xerogels to inhibit <Emphasis Type="Italic">E. coli</Emphasis> bacteria growth: effect of preparation and chloride ion on bactericidal activity

We report the antibacterial efficacies of silver and/or silver chloride containing titania xerogels synthesized with modified single step sol-gel methods against Escherichia coli bacteria. As the silver loading in TiO₂ increases, the amount of the xerogel required to inhibit the growth of the bacteria decreases and also we found that pure TiO₂ was not bactericidal. Among modified single step sol-gel methods used in this study, the additional HCl treatment sol-gel route III was very effective to obtain only AgCl crystallites in TiO₂. Based on viable cell count method, 0.125 g/L of 29%Ag/TiO₂ (made with HNO₃ sol-gel route I) was enough to inhibit the growth of E. coli whereas 0.6 g/L of 29%Ag/TiO₂ (made with the additional HCl treatment sol-gel route III) was required. However, antibacterial activity of 29%Ag/TiO₂ (made with HNO₃ sol-gel route I) after 6 usages was the same as 29%Ag/TiO₂ (made with the additional HCl treatment sol-gel route III).     

Determination of carotenoid and tocopherol content in maize flour and oil samples using near-infrared spectroscopy

Abstract

Secondary metabolites are important components in terms of nutrition and health. Carotenoids and tocopherols, two groups of the fat-soluble components, are also included in this category. There is an increasing interest in the detection of secondary metabolites with near-infrared spectroscopy. However, the number of scientific studies for the detection of these components, especially for tocopherols in corn flour or oil samples by near-infrared reflectance spectroscopy is rather limited. This study was carried out to determine the amount of carotenoids and tocopherols in flour and oil samples of 250 different maize genotypes by near-infrared reflectance spectroscopy using the partial least squares regression modeling method. Liquid chromatography mass spectrophotometry was used as a reference method in order to determine the contents of five carotenoids and four tocopherol subcomponents. The estimation models were created by using the spectral data collected from ground samples, and oil samples extracted from the same flour; along with the results of the reference analysis. The reliability of these models was tested by external validation (n?=?50). The prediction models generated by the spectra taken from corn flour yielded more successful results than the models created with the spectra taken from the oil samples. Among the models compared, the one developed with the spectra taken from flour samples for lutein was the most successful. It is seen that the estimation models generated from flour samples can be used for screening purposes, though different approaches are needed to increase the success of models.     

Leaching kinetics of electric arc furnace dust in nitric acid solutions

Electric arc furnace dust contains mainly ZnO, ZnFe₂O₄, and iron oxides. In this study, chemical composition of ZnO, ZnFe₂O₄, and Fe₂O₃ and leaching kinetics of ZnO, ZnFe₂O₄, and Fe₂O₃ in HNO₃ solutions were investigated. It was seen that the dissolution of ZnO is very fast, therefore the leaching kinetics of ZnO cannot be determined. Kinetic parameters and model equations were derived for the leaching of ZnFe₂O₄ and Fe₂O_3. Leaching kinetics of ZnFe₂O₄ was explained by the pseudohomogeneous reaction model. Activation energy and order of HNO₃ concentration were found to be as 37.5 kJ mol⁻¹ and 0.37, respectively. The model equation was derived as . It was determined that experimental data for the leaching kinetics of Fe₂O₃ best fit with the shrinking core model (SCM). Activation energy and order of HNO₃ concentration were found to be as 51.5 kJ mol⁻¹ and 0.67, respectively The model equation was derived using SCM as _.     

Gravitational Lensing in a Model of Nonlinear Electrodynamics: The Case for Electrically and Magnetically Charged Compact Objects

The astrophysical applicability of the electrically and magnetically charged black hole solutions obtained in a model of nonlinear electrodynamics proposed by Kruglov is investigated. Theoretical calculations of the bending angles and gravitational redshifts from the theory of general relativity are studied numerically by using the stellar data of charged compact objects and a hypothetical quark star model. Calculations have revealed that although the theoretical outcomes differ from the linear Maxwell case, the plotted bending angles coincide with the linear case and it becomes hard to identify the effect of nonlinearity. However, the calculation of the redshift has shown that while the increase in the electric field leads to a decrease in the gravitational redshift,the presence of the strong magnetic field contributes to the gravitational redshift in an increasing manner.     

Synthesis of tadpole polymers via triple click reactions: Copper‐catalyzed azide–alkyne cycloaddition,diels–alder,and nitroxide radical coupling reactions

We designed a trifunctional initiator ( 3 ) containing anthracene, bromide, and OH functionalities and subsequently used as an initiator in atom transfer radical Polymerization (ATRP) of styrene to yield linear polystyrene (PS) with α‐anthracene, OH, and ω‐bromide terminal groups, of which bromide is later transformed into azide to result in the linear anthracene‐, OH‐, and azide‐terminated PS (l‐α‐anthracene‐OH‐ω‐azide‐PS). The copper‐catalyzed azide–alkyne cycloaddition reaction between l‐α‐anthracene‐OH‐ω‐azide‐PS and α‐furan‐protected‐maleimide‐ω‐alkyne linkage, 4 afforded the linear anthracene‐, OH‐, and maleimide‐terminated PS. The cyclization via intramolecular Diels–Alder click reaction of this linear PS and the subsequent conversion of the hydroxyl into bromide resulted in the cyclic PS with one bromide located on the ring, (c‐PS)‐Br. Finally, the c‐PS‐Br was clicked with either well‐defined tetramethylpiperidine‐1‐oxyl‐terminated poly(ethylene glycol) (PEG) or poly(ε‐caprolactone) (PCL) yielding the tadpole polymer, (c‐PS)‐b‐PEG or (c‐PS)‐b‐PCL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

MIL‐53(Al) as a Versatile Platform for Ionic‐Liquid/MOF Composites to Enhance CO2 Selectivity over CH4 and N2

Five different imidazolium‐based ionic liquids (ILs) were incorporated into a metal–organic framework (MOF), MIL‐53(Al), to investigate the effect of IL incorporation on the CO₂ separation performance of MIL‐53(Al). CO₂, CH₄, and N₂ adsorption isotherms of the IL/MIL‐53(Al) composites and pristine MIL‐53(Al) were measured to evaluate the effect of the ILs on the CO₂/CH₄ and CO₂/N₂ selectivities of the MOF. Of the composite materials that were tested, [BMIM][PF₆]/MIL‐53(Al) exhibited the largest increase in CO₂/CH₄ selectivity, 2.8‐times higher than that of pristine MIL‐53(Al), whilst [BMIM][MeSO₄]/MIL‐53(Al) exhibited the largest increase in CO₂/N₂ selectivity, 3.3‐times higher than that of pristine MIL‐53(Al). A comparison of the CO₂ separation potentials of the IL/MOF composites showed that the [BMIM][BF₄]‐ and [BMIM][PF₆]‐incorporated MIL‐53(Al) composites both showed enhanced CO₂/N₂ and CO₂/CH₄ selectivities at pressures of 1–5 bar compared to composites of CuBTC and ZIF‐8 with the same ILs. These results demonstrate that MIL‐53(Al) is a versatile platform for IL/MOF composites and could help to guide the rational design of new composites for target gas‐separation applications.     

Synthesis of new bio‐based hydrogels derived from bile acids by free‐radical photo‐polymerization

In this article, the study on the swelling and thermal behaviors of a new series of bile acid‐based polymeric hydrogels is reported. For this purpose, in the first step, the reduction of carboxyl acid groups of some common bile acids including cholic acid (CA), chenodeoxy cholic acid (CDCA), and lithocholic acid (LCA) to the corresponding alcohols by lithium aluminum hydride (LiAlH₄) in THF solution is performed. Then, hydroxyl functionalities of the obtained products are reacted with the acryloyl chloride in the presence of triethylamine (TEA). Finally, the cross‐linking reactions between acryloyl functionalized bile acids and methoxy poly(ethylene glycol) monomethacrylate (MPEGMA) are conducted by free‐radical photo‐polymerization technique at λ = 350 nm in the presence of 2,2‐Dimethoxy‐2‐phenylacetophenone (DMPA) as an initiator to achieve the desired bile acid‐based polymeric hydrogels. The resulting hydrogels and their intermediates are characterized by Fourier transform infrared (FT‐IR) and Proton nuclear magnetic resonance (¹H‐NMR) spectroscopies. The swelling and thermal behavior of the obtained hydrogels indicates that the hydrogel starting from cholic acid is more swellable and has enhanced thermostability compared to others. Thus, the results of this study offer beneficial insights to researchers working in particularly bio‐medical industry.