Use of transition elements to enhance sensitivity for selenium determination by graphite-furnace atomic-absorption spectrophotometry combined with solvent extraction with the APDC-MIBK system

A microanalytical method for the measurement of selenium in waters and biological materials by a flameless atomic-absorption technique has been developed. The ammonium pyrrolidinedithiocarbamate-methyl isobutyl ketone extraction system is used for separation from interfering materials such as large amounts of alkali and alkaline earth metal salts and mineral acids. The atomic-absorption sensitivity for selenium is found to be enhanced to a large extent by co-extraction of some transition metal ions. Copper(II) has been used successfully as such an additive to diminish the volatility of selenium in the graphite furnace during the ashing step of the atomization cycle. When the aqueous phase/organic solvent volume ratio is 5 and the volume injected into the graphite furnace is 20 mul, the sensitivity for selenium is 0.3 ng/ml for 1% absorption. The relative standard deviation is ca. 2%. Interference by other metal ions is prevented by masking with EDTA. The method has been applied satisfactorily for the determination of minute amounts of selenium in waters and various biological materials.     

Novel quinazoline ring synthesis by cycloaddition of N-arylketenimines with N,N-disubstituted cyanamides

The reaction of N-aryl-substituted ketenimines with N,N-disubstituted cyanamides or (MeS)2C=N-CN under high pressure afforded 4-(N,N-disubstituted amino) or 4-(MeS)2C=N-substituted quinazoline derivatives, respectively. These products were formed by [4+2] cycloaddition between the aza-diene moieties of the N-arylsubstituted ketenimines and cyano groups. A 4-(unsubstituted amino)quinazoline derivative was synthesized by hydrolysis of the latter product.     

Transformation of arctiin to estrogenic and antiestrogenic substances by human intestinal bacteria

After anaerobic incubation of arctiin (1) from the seeds of Arctium lappa with a human fecal suspension, six metabolites were formed, and their structures were identified as (-)-arctigenin (2), (2R,3R)-2-(3',4'-dihydroxybenzyl)-3-(3",4"-dimethoxybenzyl)butyrolactone (3), (2R,3R)-2-(3'-hydroxybenzyl)-3-(3",4"-dimethoxybenzyl)butyrolactone (4), (2R,3R)-2-(3'-hydroxybenzyl)-3-(3"-hydroxy-4"-methoxybenzyl)butyrolactone (5), (2R,3R)-2-(3'-hydroxybenzyl)-3-(3",4"-dihydroxybenzyl)butyrolactone (6), and (-)-enterolactone (7) by various spectroscopic means including two dimensional (2D)-NMR, mass spectrometry, and circular dichroism. A possible metabolic pathway was proposed on the basis of their structures and the time course of the transformation. Enterolactones obtained from the biotransformation of arctiin and secoisolariciresinol diglucoside (SDG, from the seeds of Linum usitatissium) by human intestinal bacteria were proved to be enantiomers, with the (-)-(2R,3R) and (+)-(2S,3S) configurations, respectively. Compound 6 showed the most potent proliferative effect on the growth of MCF-7 human breast cancer cells in culture among 1 and six metabolites, while it showed inhibitory activity on estradiol-mediated proliferation of MCF-7 cells at a concentration of 10 microM. These results indicate that the transformation of 1 by intestinal flora might be essential for the manifestation of the estrogenic and antiestrogenic activity of 1.     

Chirality control in optically active polysilane aggregates

A novel strategy for controlling the higher order chirality of aggregates prepared from enantiopure polysilanes is experimentally probed and discussed. Structurally similar poly[n-alkyl(aryl)]silanes were synthesized in which one side chain comprised the chiral (S)-2-methylbutyl group and the other an achiral m- or p-alkyl-substituted phenyl ring. In solution the polymers adopt helical conformations with the same induced preferential screw sense chirality, as evidenced by circular dichroism (CD) spectroscopy. Aggregates, however, formed by addition of a nonsolvent to a polymer solution, show oppositely signed CD spectra. Consistent results were obtained for another series of poly[p-n-alkyl(aryl)]silanes where alkyl is butyl, propyl, and ethyl. The sense of the aggregate higher order chirality is dependent on the chemical composition and environment and is coarse-tunable by adjusting the length of the achiral side chain and fine-tunable by adjusting the good/poor solvent ratio. The origin of these effects is discussed with reference to a simple model.     

Studies on polymers containing functional groups. II. Polymerization behavior of o-hydroxystyrene

The polymerization behavior of o-hydroxystyrene with free-radical and cationic initiators and without an initiator was examined. The structures thus obtained were estimated. Although polymerization behavior of o-hydroxystyrene was rather complicated, according to the results, it appeared that each polymerization more or less might simultaneously follow the two types of mechanisms: normal vinyl polymerization and polymerization through the addition to benzene nuclei. The proportion of addition to benzene nuclei was considered to be highest in the polymerization with BF₃·(OEt)₂ and lowest in that with azobisisobutyronitrile. Degrees of polymerization of these polymers were low in all cases (42–82). Some brief experiments on copolymerization of o-hydroxystyrene were carried out.     

Polymer-supported bases. IX. Synthesis and catalytic activity of polymer-bound 4-(1-pyrrolidino)pyridine moieties

Polystyrene-bound 4-(1-pyrrolidino)pyridine moieties were prepared by the reaction of chloromethylated polystyrene resins with pyrrolidinopyridine derivatives containing hydroxyl groups. The supported amines were effective catalysts for acylations of tert-alcohols or enols, acylrearrangements, and diester synthesis from epoxides and anhydrides. Some of the low ring-substituted (8–15%) catalysts exhibited high activity comparable to that of 4-(N,N-dimethylamino)pyridine, though the activity was a little lower than that of 4-(1-pyrrolidino)pyridine. The recovered catalysts can be re-used, except for acyl rearrangements, without significant decrease in activity.     

Polymerizability of unsaturated monomers capable of forming stable radicals

Some unsaturated monomers bearing hindered phenol and arylamine groups capable of forming stable radicals were prepared. Radical polymerizations of vinyl monomers having such groups were investigated with the use of azobisisobutyronitrile, benzoyl peroxide, cumene hydroperoxide, and tetraethylthiuram disulfide as initiator. Polymerizations of these monomers went normally only when azobisisobutyronitrile was used as initiator. The other initiators inhibited polymerizations remarkably or completely. The results suggest that radicals resulting from benzoyl peroxide and cumene hydroperoxide or tetraethylthiuram disulfide abstract hydrogen of the phenol or the amine to produce the stable radicals, thereby inhibiting the polymerization. Meanwhile, carbon radicals resulting from azobisisobutyronitrile add selectively to the vinyl double bonds of the monomers to initiate the polymerizations. The vinyl derivatives as well as allyl derivatives and cinnamic acid derivatives copolymerize easily with conventional monomers such as styrene, maleic anhydride, and butadiene, again, only when azobisisobutyronitrile was used as initiator. Antioxidative properties for styrene copolymers and butadiene-styrene copolymers incorporating the hindered phenol monomers were investigated.     

Surface magnetism of β-FeO(OH) by Mössbauer spectroscopy

Fine particles of -FeO(OH) were prepared using the⁵⁶Fe isotope and the surfaces of the particles were coated with extremely thin⁵⁷Fe(III) layers. Mössbauer results show that the Fe(III) ions in the top surface layer are involved in the magnetic order and occupy two kinds of surface sites. Both of the two exchange field at surface sites, estimated from the temperature dependences of the hyperfine fields, are smaller than the bulk value. The decrease of exchange fields at the surface sites corresponds to the reduced number of neighboring magnetic ions at each site.     

Aminyl radical cyclization by means of anodic oxidation. Stereoselective synthesis of cis-1-methyl-2,5-disubstituted pyrrolidines

Neutral aminyl radicals generated by anodic oxidation of lithium alkenylamides 2 undergo a stereoselective cyclization to give $\text{cis}$-1-methyl-2,5-disubstituted pyrrolidines 4. Their $\text{cis}$ stereochemistry was confirmed by a comparison with $\text{trans}$-1,2-dimethyl-5-phenylpyrrolidine, the structure of which was established by X-ray crystallographic analysis of its quarternary ammonium bromide 6.