Reaction of magnesium alkylidene carbenoids with lithium acetylides and lithium thiolates: a novel synthesis of conjugated enynes and vinyl sulfides

Magnesium alkylidene carbenoids were generated from 1-chlorovinyl p-tolyl sulfoxides with i-PrMgCl at −78 °C in THF or toluene via the sulfoxide-magnesium exchange reaction. Reaction of the generated magnesium alkylidene carbenoids with lithium acetylides or lithium thiolates gave conjugated enynes or vinyl sulfides, respectively, in moderate to good yields. The intermediate of this reaction was found to be the alkenyl anion and it could be trapped with some electrophiles to give tetra-substituted conjugated enynes and vinyl sulfides.     

Bromination by means of sodium monobromoisocyanurate (SMBI)

A variety of aromatic compounds with both activating and deactivating substituents were brominated with sodium monobromoisocyanurate (SMBI) 1, diethyl ether, diethyl ether-methanesulfonic acid, trifluoroacetic acid, or sulfuric acid were employed as solvents. Thus nitrobenzene was conveniently brominated in sulfuric acid, benzene was readily monobrominated in diethyl ether-methanesulfonic acid, and phenol was selectively brominated at the ortho position under mild conditions in refluxing diethyl ether. With substituents that are easily protonated, trifluoroacetic acid may be employed as solvent in the reaction with 1, in contrast NBS was ineffective in trifluoroacetic acid. This renders 1 a superior reagent relative to NBS. In addition to aromatics, alkenes, ketones and esters were also brominated with 1. Diethyl malonate was brominated with 1 and then subjected to a Bingel reaction with NaH to afford the desired methanofullerene in reasonable yield.     

Novel alkenylative cyclization using a ruthenium catalyst

Novel alkenylative cyclization of enyne was developed using Cp*RuCl(cod) under ethylene gas at room temperature.     

Isomerization of aldehyde-2,4-dinitrophenylhydrazone derivatives and validation of high-performance liquid chromatographic analysis

The most widely used method for qualitative and quantitative analysis of carbonyl compounds is the 2,4-dinitrophenylhydrazine method through the formation of 2,4-dinitrophenylhydrazone derivatives. However, this method may cause an analytical error because 2,4-dinitrophenylhydrazones have both E- and Z-stereoisomers. Purified aldehyde-2,4-dinitrophenylhydrazone demonstrated only the E-isomer. However under UV irradiation and the addition of acid, both E- and Z-isomers were seen. The spectral patterns of Z-isomers were different from those of E-isomers and the absorption maximum wavelengths were shifted towards shorter wavelengths by 5-8 nm. An equilibrium Z/E isomer ratio was observed in 0.02-0.2% (v/v) phosphoric acid solutions. In the case of acetaldehyde- and propanal-2,4-dinitrophenylhydrazones, the equilibrium Z/E isomer ratios were 0.32 and 0.14, respectively. However, when irradiated with ultraviolet light at 364 nm, the isomer ratios were increased beyond this constant ratio and reached 0.55 and 0.33, respectively. Zero-order rates for decreases of aldehyde derivatives were observed under UV irradiation (364 nm), however the decreases of concentration were not observed in phosphoric acid solutions. The best method for the determination of aldehyde-2,4-dinitrophenylhydrazones by HPLC is to add phosphoric acid to both the sample and the standard solution, to form a 0.02-1% acid solution.     

Stereoselective synthesis of (Z)-2-fluoro-1-alkenyl(phenyl)iodonium tetrafluoroborates

[reaction: see text] (Z)-2-Fluoro-1-alkenyl(phenyl)iodonium salts were stereoselectively prepared by the reaction of alkynyl(phenyl)iodonium salts with aqueous HF in good yields. The method is applicable to the synthesis of fluoroalkenyliodonium salts having functional groups such as ketone, ester, and chloride. (Z)-2-Fluoro-1-alkene, (Z)-2-fluoro-2-alkenoate, and (Z)-beta-fluoroenyne could be stereoselectively prepared from the fluoroalkenyliodonium salt.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

Synthesis of 1-alkylselenocyclobutene via intermediate allenyl selenoketene

Reactions of 2-alkynyl arylethynyl selenide 1 with alkyl iodides 3 in the presence of lithium aluminium hydride via allenyl selenoketene 2 afforded cyclobutene 4. Allenyl group of the intermediate allenyl selenoketene 2 was monitored by React IR.     

Profiling and comprehensive expression analysis of ABC transporter solute-binding proteins of Bacillus subtilis membrane based on a proteomic approach

We analyzed ABC transporter solute-binding proteins (SBPs) of the Bacillus subtilis membrane using a proteomic approach. We prepared a washed cell membrane fraction that was insoluble in 134 mM nondetergent sulfobetaine and then extracted proteins using mixtures of detergents in a stepwise manner. The membrane proteins were resolved by three two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) or two one-dimensional (1-D) PAGE procedures, electroblotted, and digested in the presence of 5% or 80% acetonitrile. Thereafter, matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF MS) identified 637 proteins corresponding to 15.9% of the total cellular proteins. We predicted that among these, 256 were membrane proteins, 101 were lipoproteins or secretory proteins and 280 were soluble proteins containing peripheral proteins that function in both the cytoplasm and the cell membrane such as SecA and FtsY. Among the 637 proteins, we identified 30 SBPs among 38 importers predicted by a bioinformatic search of the genome. We confirmed expression of the genes for the 30 SBPs using DNA microarray analysis. We compared the 2-D gel separation profiles of submembrane fractions solubilized by 1% n-dodecyl-beta-D-maltoside from cells cultured on Luria Bertani (LB), S7, and S7 medium without glutamate as well as DNA microarray data on LB and S7. The results suggested that YcdH, YtmK and YurO are binding proteins for Mn(++), glutamate and glucose, respectively, and that YqiX and YxeM are binding proteins for amino acids (tryptophan in S7 medium).     

Double-chelation-assisted Rh-catalyzed intermolecular hydroacylation between salicylaldehydes and 1,4-penta- or 1,5-hexadienes

Intermolecular hydroacylation between salicylaldehydes 1, 26-40 and 1,4-penta- or 1,5-hexadienes 4-13 by Rh-catalyst proceeded under mild reaction conditions to give a mixture of iso- and normal-hydroacylated products 14-25, 41-55, and 57-60. In the hydroacylation reaction, chelation of both salicylaldehyde and diene to the Rh-complex plays a crucial role. The ratio of iso- and normal-hydroacylated products could be regulated by the addition of salicylic acid or amines. The effects of various Rh-complexes, solvents, and additives were examined, and the plausible mechanisms of the catalytic cycle were proposed on the basis of the deuterium-labeling salicylaldehyde experiments.     

Higher triplet excited states of benzophenones and bimolecular triplet energy transfer measured by using nanosecond-picosecond two-color/two-laser flash photolysis

The lifetimes of benzophenone in the higher triplet excited state (BP(T(n))) and several BP derivatives in the T(n) states were measured directly to be tau(T(n))=37+/-7 ps and 20-33 ps, respectively, by using the nanosecond-picosecond (ns-ps) two-color/two-laser flash photolysis method. Based on the direct measurements of tau(T(n)) of BP(T(n)), the triplet energy transfer (TET) from BP(T(n)) to quenchers (Q), such as carbon tetrachloride (CCl4), benzene (Bz), and p-dichlorbenzene (DCB), was investigated. The fast TET from BP(T(n)) to Q can be attributed to the lifetime-dependent quenching process, according to the Ware theoretical model of the bimolecular energy transfer reaction. The contribution of the lifetime-dependent term on k(TET) was 27, 60, and 86% for CCl4, Bz, and DCB as the Q of BP(T(n)), respectively, indicating that the TET from BP(T(n)) to Q is influenced not only by tau(T(n)), but also by the size of Q.