SEC–MALLS analysis of cellulose using LiCl/1,3-dimethyl-2-imidazolidinone as an eluent

The lithium chloride/1,3-dimethyl-2-imidazolidinone (LiCl/DMI) solvent system for cellulose was adopted as a mobile phase of size-exclusion chromatographic (SEC) analysis of cellulose, and the applicability of this system was examined using multi-angle laser light scattering and ¹³C-NMR analysis. The results indicate that 8% (w/v) LiCl/DMI ID a true solvent for cellulose, and that cellulose molecules dissolving ID 1% (w/v) LiCl/DMI are separated orderly depending on their molecular mass (MM) or root-mean-square (RMS) radius by the SEC system. Practically, no aggregates were detected ID the dilute cellulose/LiCl/DMI solutions. Furthermore, high stability of cellulose/LiCl/DMI solutions has been demonstrated; only a few percent of decline ID average MM was observed even after storage for 6 months at room temperature. Relationships between RMS radius and MM for hardwood bleached kraft pulp ID 1% LiCl/DMI was estimated as the following equation: _g^0.59, corresponding to a Mark–Houwink–Sakurada exponent of 0.77.     

Imaging of enzyme activity by scanning electrochemical microscope equipped with a feedback control for substrate-probe distance

The enzymatic activity of diaphorase (Dp) immobilized on a solid substrate was characterized using a scanning electrochemical microscope (SECM) with shear force feedback to control the substrate-probe distance. The shear force between the substrate and the probe was monitored with a tuning fork-type quartz crystal and used as the feedback control to set the microelectrode probe close to the substrate surface. The sensitivity and the contrast of the SECM image were improved in the constant distance mode (distance, 50 nm) with the shear force feedback compared to the image in the constant height mode without the feedback. By using this system, the SECM and topographic images of the immobilized diaphorase were simultaneously measured. The microelectrode tip used in this study was ground aslant like a syringe needle in order to obtain the shaper topographic images. This shape was also effective for avoiding the interference during the diffusion of the enzyme substrates.     

A study of molecular vibrational relaxation mechanism in condensed phase based upon mixed quantum-classical molecular dynamics. I. A test of IBC model for the relaxation of a nonpolar solute in nonpolar solvent at high density

In order to investigate vibrational relaxation mechanism in condensed phase, a series of mixed quantum-classical molecular dynamics calculations have been executed for nonpolar solute in nonpolar solvent and polar solute in polar solvent. In the first paper (Paper I), relaxation mechanism of I2 in Ar, where Lennard-Jones force is predominant in the interaction, is investigated as a function of density and temperature, focusing our attention on the isolated binary collision (IBC) model. The model was originally established for the relaxation in gas phase. A key question, here, is "can we apply the IBC model to the relaxation in the high-density fluid?" Analyzing the trajectory of solvent molecule as well as its interaction with the solute, we found that collisions between them may be defined clearly even in the high-density fluid. Change of the survival probability of the vibrationally first excited state on collision was traced. The change caused by collisions with a particular solvent molecule was also traced together with the interaction between them. Each collision makes a contribution to the relaxation by a stepwise change in the probability. The analysis clearly shows that the relaxation is caused by collisions even in the high-density fluid. The difference between stepwise relaxation and the continuous one found for the total relaxation in the low-density fluid and in the high-density one, respectively, was clarified to come from just the difference in frequency of the collision. The stronger the intensity of the collision is, the greater the relaxation caused by the collision is. Further, the shorter the collision time is, the greater the resultant relaxation is. The discussion is followed by the succeeding paper (Paper II), where we report that molecular mechanism of the relaxation of a polar molecule in supercritical water is significantly different from that assumed in the IBC model despite that the density dependence of the relaxation rate showed a linear correlation with the local density of water around the solute, the linear correlation being apparently in good accordance with the IBC model. The puzzle will be solved in Paper II.     

Enantioface-selective palladium-catalyzed silaboration of allenes via double asymmetric induction

Enantioenriched beta-borylallylsilanes were synthesized by palladium-catalyzed enantioface-selective addition of the silicon-boron bond to terminal allenes using a palladium catalyst possessing a chiral monodentate phosphine ligand. Use of a silylborane bearing a chiral auxiliary on the boron atom was beneficial to gain enantioface selectivities as high as 96% de.     

Construction of the benzylic quaternary carbon center of zoanthenol by intramolecular Mizoroki-Heck reaction of enone

[reaction: see text]. Stereocontrolled synthesis of the ABC ring framework of zoanthenol has been achieved. Our studies show that a beta,beta-disubstituted enone can act as a good acceptor of arylpalladium intermediates in the formation of a congested benzylic quaternary carbon center through an intramoleculer Mizoroki-Heck reaction. The cis B/C ring system was stereoselectively converted to the trans-fused framework through a SmI2-promoted deoxygenation of the alpha-hydroxy ketone.     

Photocrosslinking of poly(2,3-epithiopropyl methacrylate) by the oxidation of pendant episulfide groups

In the photocrosslinking of poly(2,3-epithiopropyl methacrylate) (PETMA) films the effect of the pendant episulfide group's oxidation on the crosslinking of PETMA was investigated. Thermal crosslinking of PETMA is promoted by peroxides such as benzoyl peroxide and hydrogen peroxide. IR spectrum of the crosslinked PETMA showed that the reaction proceeded through the oxidation of episulfide groups by the peroxides. The anthracene (An) sensitized photocrosslinking of PETMA films also proceeded via the oxidation of episulfide groups by singlet oxygen. It was found that residual tetrahydrofuran (THF) in the films remarkably increased the rate of the photocrosslinking and/or reduced the induction period. From the further investigation concerning casting solvents it was found that residual CS₂, CCl₄, and CHCl₃ in films increased the rate of the photocrosslinking and/or reduced the induction period of the photocrosslinking. The disappearance rate of An in the films was also increased by the presence of residual CS₂, CCl₄, and CHCl₃, differring from the result of THF. These results were explained by a difference in lifetime of singlet oxygen in the films. From the results were explained by a difference in lifetime of singlet oxygen in the films. From the results concerning the effects of hydroperoxides such as THF hydroperoxide and t-butyl hydroperoxide on the photocrosslinking of PETMA films the acceleration effect of the residual THF was deduced to be due to the promotion of singlet oxygen-oxidation of sulfide groups by protic compounds such as THF hydroperoxide and H₂O in the THF.     

Preparation of Gd(2)O(3) : Eu(3+) and Gd(2)O(2)S : Eu(3+) phosphor fine particles using an emulsion liquid membrane system

Size- (submicrometer-sized) and morphology- (spherical) controlled composite Gd-Eu oxalate particles were prepared in an emulsion liquid membrane (water-in-oil-in-water emulsion) system. The oxalate particles thus prepared were calcined in air to obtain Gd(2)O(3) : Eu(3+) phosphor particles and in sulfur atmosphere to obtain Gd(2)O(2)S : Eu(3+) phosphor particles. These submicrometer-sized spherical phosphor particles showed photoluminescence properties with emission peak at 614 nm for Gd(2)O(3) : Eu(3+) and 628 nm for Gd(2)O(2)S : Eu(3+).