Simultaneous Measurement of Droplet Size and Three-Components of Velocity in Spray

The combination of the optical diagnostics and image processing technique has produced various methods of practical measurement in engineering. The measurement of size and velocity of droplets in fuel spray is one typical example. In general, the spray is a complicated and three-dimensional two-phase flow; therefore multi-dimensional field measurement of the spray field is indispensable. In the present paper, a technique of simultaneous measurement of droplet size and three-components of velocity is proposed and applied to spray issuing from the swirl nozzle as a practical application. The focused image of glare points is captured by a stereoscopic arrangement, and droplet size and the three-components of velocity are evaluated from the doublet image. Fundamental optical arrangements to capture the image of the glare points with a stereo view are established, and the feasibility and the accuracy of the technique are confirmed. © 2004 The Optical Society of Japan     

Extremal Self-Dual [50, 25, 10] Codes with Automorphisms of Order 3 and Quasi-Symmetric 2-(49, 9,6) Designs

Five non-isomorphic quasi-symmetric 2-(49, 9, 6) designs are known. They arise from extremal self-dual [50, 25, 10] codes with a certain weight enumerator. Four of them have an automorphism of order 3 fixing two points. In this paper, it is shown that there are exactly 48 inequivalent extremal self-dual [50, 25, 10] code with this weight enumerator and an automorphism of order 3 fixing two points. 44 new quasi-symmetric 2-(49, 9, 6) designs with an automorphism of order 3 are constructed from these codes.     

The Two-Point Codes with the Designed Distance on a Hermitian Curve in Even Characteristic

In Homma M and Kim SJ [2], the authors considered two-point codes on a Hermitian curve defined over fields of odd characteristic. In this paper, we study the geometry of a Hermitian curve over fields of even characteristic and classify the two-point codes whose minimum distances agree with the designed ones.     

Tristimulus colorimetry using a digital still camera and its application to determination of iron and residual chlorine in water samples.

Tristimulus colorimetry using a digital still camera (DSC) as a colorimeter has been developed. A photograph of a sample and standard solutions was taken simultaneously with the DSC, and it was transferred to a PC. On the PC, the colors of the sample and of the standard solutions were analyzed and L* (brightness), a* (red-green component), and b* (yellow-blue component) values were determined with laboratory-made software. A dedicated light-box containing white-color LEDs as light source was made of white acrylic to make constant exposure at each photograph. Various settings of the DSC, such as exposure mode, white balance, and so on, that affect analytical figures, were studied with determination of iron with 1,10-phenanthroline. This method was successfully applied to the determinations of iron in a river water sample and of residual chlorine in tap water samples with N,N-diethylphenylenediamine (DPD).     

Inductively-coupled plasma/atomic emission spectrometry of sulfur with a vacuum scanning spectrometer and its application to the analysis of coal liquefaction catalysts

Inductively-coupled plasma/atomic emission spectrometry with a high-resolution vacuum scanning monochromator is described for the determination of sulfur at 180.734 nm. The behavior of the signal-to-background ratio is investigated as functions of RF power, argon gas flow rate and observation height above the load coil. Under the operating conditions selected, the detection limit is 3 μg l^?1. The Se I 196.090-nm line is chosen as internal standard, because the S/Se line pair exhibited the least change with carrier gas flow rate and acid concentration of solution. Sulfur in NiMo and CoMo/ Al₂O₃ catalysts used for coal liquefaction is determined as S(II) and S(VI) species. The total amount of the species agreed well with the sulfur value obtained by the conventinal combustion method.     

Ab initio calculations of isomerization reaction of diphosphene 1-sulfide to thiadiphosphirane

Ab initio Calculations of the isomerization reaction of diphosphene 1-sulfide (2′) to thiadiphosphirane (3′) suggest that the energy barrier of the reaction in the ground state is 25 kcal/mol and that 2′ lies 21 kcal/mol above 3′, while the calculations show that there exists one local minimum on the lowest triplet energy surface.     

Synthesis of new axially dissymmetric ligand with large perfluoroalkyl groups

A new axially dissymmetric ligand with large perfluoroalkyl groups, 2,2′-bis(1-hydroxy-1H-perfluorooctyl)biphenyl (1c), which could not be obtained by the coupling reaction of the aryl bromide using copper powder, was synthesized successfully by the coupling reaction using Ni(COD)₂. This ligand showed much higher asymmetric induction in the reaction of diethylzinc with benzaldehyde than the trifluoromethyl (1a) or pentafluoroethyl (1b) analogues.     

Reaction of tetraazathiapentalene and thiadiazolopyrimidine derivatives with heterocumulenes: Cycloaddition and elimination reactions via hypervalent sulfur intermediates

Tetraazathiapentalene derivative 1 reacts with heterocumulenes such as diphenylketene (2) and 2‐pyridylisothiocyanate (5) to give heterocycles 3, 6 and 7 with elimination of methylisothiocyanate. The reactions of thiadiazolopyrimidine derivatives 8a‐b with ethoxycarbonyl isothiocyanate (9) and carbon disulfide (11) gives heterocycles 10 and 12 via thermal decomposition of 1:1 cycloadducts C and D which have a hypervalent sulfur. The mechanistic and reactivity features of these reactions are described.     

Vibrational spectra and molecular conformations of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes

The Raman and IR spectra of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes have been measured. The normal coordinates have been calculated for these molecules using a consistent set of force constants and the molecular conformations studied by analysing the spectra with reference to the results of the calculations. In the crystalline solid state, 1,5-dichloropentane assumes the trans-trans-trans-gauche form and 1,5-dibromopentane, 1,6-dichloro- and 1,6-dibromohexanes assume the all-trans form. The normal coordinate treatment with the well-established force field was of great help in determining the whole molecular form of the relatively large chain molecules.