Thermal decomposition mechanisms of sequential bipolyesters based on propeneglycol and hydroxybenzoic/phthalic diacid derivatives

Some bipolyesters consisting of 1,2-propene glycol residue (P) and symmetric aromatic diacid residue constituted by two p-oxybenzoyl groups coupled by a terephthaloyl (HTH), phthaloyl (HOH) and isophthaloyl (HIH) group, and a nonsymmetric diacid residue constituted by a p-oxybenzoyl and a terephthaloyl group (HT), have been investigated by direct pyrolysis–mass spectrometry. The results show that intramolecular exchange reactions occurring at the pyrolysis stage cause a reorganization of the copolymer sequences. Sequential bipolyesters I–IV are ideal materials for the investigation of the extent of thermal reorganization induced in the bipolymer sequences by the pyrolytic process.     

Electron-transfer reaction of cinnamic acids and their methyl esters with the DPPH(*) radical in alcoholic solutions

The kinetic behavior of cinnamic acids, their methyl esters, and two catechols 1-10 (ArOH) in the reaction with DPPH(*) in methanol and ethanol is not compatible with a reaction mechanism that involves hydrogen atom abstraction from the hydroxyl group of 1-10 by DPPH(*). The rate of this reaction at 25 degrees C is, in fact, comparatively fast despite that the phenolic OH group of ArOH is hydrogen bonded to solvent molecules. The observed rate constants (k(1)) relative to DPPH(*) + ArOH are 3-5 times larger for the methyl esters than for the corresponding free acids and, for the latter, decrease as their concentration is increased according to the relation k(1) = B/[ArOH](0)(m), where k(1) is given in units of M(-1) s(-1), m is ca. 0.5, and B ranges from 0.02 (p-coumaric acid) to ca. 3.48 (caffeic acid) in methanol and from 0.04 (p-coumaric acid) to ca. 13 (sinapic acid) in ethanol. Apparently, the reaction mechanism of DPPH(*) + ArOH involves a fast electron-transfer process from the phenoxide anion of 1-10 to DPPH(*). Kinetic analysis of the reaction sequence for the free acids leads to an expression for the observed rate constant, k(1), proportional to [ArOH](0)(-1/2) in excellent agreement with the experimental behavior of these phenols. The experimental results are also interpreted in terms of the influence that adventitious acids or bases present in the solvent may have. These impurities dramatically influence the ionization equilibrium of phenols and cause a reduction or an enhancement, respectively, of the measured rate constants.     

The exo-selectivity of the new non-natural chiral auxiliary (+)-(1R,endo)-2-benzonorbornenol in an asymmetric aza-Diels-Alder reaction

The recently reported compound (+)-(1R,endo)-2-benzonorbornenol (2) proved to be an efficient chiral auxiliary in the asymmetric aza-Diels-Alder reaction between cyclopentadiene and the N-benzyl imine of its glyoxylate, which afforded a virtually all-exo mixture of cycloaducts with a 1S:1R diastereomeric ratio of 63:37.     

Protein secondary structure and stability determined by combining exoproteolysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In the post-genomic era, several projects focused on the massive experimental resolution of the three-dimensional structures of all the proteins of different organisms have been initiated. Simultaneously, significant progress has been made in the ab initio prediction of protein three-dimensional structure. One of the keys to the success of such a prediction is the use of local information (i.e. secondary structure). Here we describe a new limited proteolysis methodology, based on the use of unspecific exoproteases coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), to map quickly secondary structure elements of a protein from both ends, the N- and C-termini. We show that the proteolytic patterns (mass spectra series) obtained can be interpreted in the light of the conformation and local stability of the analyzed proteins, a direct correlation being observed between the predicted and the experimentally derived protein secondary structure. Further, this methodology can be easily applied to check rapidly the folding state of a protein and characterize mutational effects on protein conformation and stability. Moreover, given global stability information, this methodology allows one to locate the protein regions of increased or decreased conformational stability. All of this can be done with a small fraction of the amount of protein required by most of the other methods for conformational analysis. Thus limited exoproteolysis, together with MALDI-TOF MS, can be a useful tool to achieve quickly the elucidation of protein structure and stability.     

High stability amperometric biosensor based on enzyme entrapment in microgels

The preparation and characterization of an amperometric glucose biosensor based on the entrapment of glucose oxidase (GOx) in a polyacrylamide microgel is described. This study proves that polyacrylamide microgels provide an excellent matrix for GOx immobilization that can be used as a biological material in amperometric biosensors. The interference produced by ascorbic and uric acid has been eliminated by including acrylic acid in the polymeric matrix. With this modification, we obtain an adequate device for glucose determination in complex samples such as blood and serum. The study of the temperature effect in the response of biosensors indicates that swelling of the microgels directly influences the enzymatic activity. Thus, the behaviour of the enzyme in the swollen microgels is similar to the enzyme in solution, but the enzyme's activation energy increases when the water content in the microgels decreases. One important property of these biosensors is their remarkable stability. After 4 months of its manufacture, there is no loss in the initial response. Furthermore, the enzymatic activity of freeze-dried microgels containing enzyme remains unaltered for at least 18 months.     

Conformational behaviour of 2,2′-bipyrrole

The rotational potential around the interannular bond in 2,2-bipyrrole has been calculated making use of standard minimal STO-3G and split valence 4-31G basis sets. Geometrical optimization concerning the most significant interannular internal parameters has been performed with both basis sets. The trans conformer is predicted to be more stable than the cis. The minimal basis set predicts the existence of a cisoid-gauche minimum which after limited optimization becomes very shallow and it seems to be an artifact of the rigid rotor approximation. At 4-31G level, both the trans and cis conformers represent maxima in the potential curve and two gauche minima appear at =46.0° and =147.6°, the latter being the absolute minimum. The absolute maximum of the potential curve corresponds to the cis conformer.     

Peptide backbone folding induced by the C(alpha)-tetrasubstituted cyclic alpha-amino acids 4-amino-1,2-dithiolane-4-carboxylic acid (Adt) and 1-aminocyclopentane-1-carboxylic acid (Ac5c). A joint computational and experimental study

The conformational study of a new group of synthetic peptides containing 4-amino-1,2-dithiolane-4-carboxylic acid (Adt), a cysteine-related achiral residue, has been carried out through a joint application of computational and experimental methodologies. Molecular Dynamics simulations clearly suggest the tendency of this molecule to adopt a gamma-turn conformation in vacuum and help in analyzing the complex and crucial conformational behaviour of the dithiolane ring which appears to preferentially adopt a C(S)-like structure. Electronic structure calculations carried out in solution using the Density Functional Theory also indicate the preservation of the gamma-like folding in apolar solvents and the helix-like one in more polar solvents. A comparison with the achiral 1-aminocycloalkane-1-carboxylic acid (Ac5c) has been carried out using the same computational tools. NMR and IR data on dipeptide derivatives containing the Adt or Ac5c residue show that in chloroform solution all the models prefer a gamma-turn structure, centered at the cyclic residue, stabilized by an intramolecular H-bond, whereas in a more polar solvent, i.e. dimethyl sulfoxide, this folding is not maintained. The experimental conformational studies, extended to N-Boc protected tripeptides, clearly indicate the remarkable tendency of both the five-membered C(alpha)-tetrasubstituted cyclic amino acids Adt and Ac5c to induce the gamma-turn structure also in models able to adopt the beta-bend conformation.     

Synthesis of imidazo[1,2-c] quinazoline and some of its methyl derivatives

The synthesis of imidazo [1,2-c] quinazoline was effected by manganese dioxide oxidation of the 5,6-dihydroimidazo [1,2-c] quinazoline which was prepared by treatment of 2-(o-nitro-phenyl)-1-hydroxyimidazole-3-oxide with zinc powder and formic acid. The synthesis of some methyl derivatives of this ring system are also described. Structural assignments for all of the products were made from spectral data.     

Association of bound states of the coulomb potential with resonances of the coulomb potential perturbed by a barrier

In the present article we show how the bound states of the Coulomb potential may be associated with resonances that occur when this potential is perturbed by a barrier potential. The main idea is to trace the bound states on successive switching on of the barrier perturbation. It is found that those bound states that are localized inside the barrier are highly sensitive to variation with respect to the barrier height, whereas those that are localized outside are less sensitive. However, there are certain intervals for the barrier height when the role of being “a state localized inside the barrier” is shifted from one bound state to another. The result can be pictured as a “relay race,” where the “deliveries of the baton” are carried out over corresponding avoided crossings. The baton is ultimately handed over to a shape-type resonance state.     

Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.