Application of micellar electrokinetic chromatography to the quality control of a pharmaceutical preparation containing three bronchodilators

Theophylline(1,3-dimethylxanthine), dyphylline [7-(2,3-dihydroxypropyl)theophylline] and proxyphylline [7-(beta-hydroxypropyl)theophylline] are three bronchodilators administered jointly in a single pharmaceutical preparation used against asthma. A micellar electrokinetic chromatography (MEKC) method for their resolution using a background electrolyte consisting of 20 mM tetraborate at pH 8.5 and 100 mM sodium dodecyl sulfate is proposed. The method was used to determine the three active principles in a pharmaceutical preparation. The small amount of sample required and the expeditiousness of the procedure allow content uniformity to be determined in individual tablets. The values of the validation parameters for the method (viz. selectivity, linearity, accuracy, precision, limit of detection, limit of quantitation and robustness) are reported. A complete factor design (2(3)x2) including pH, the surfactant concentration and the ionic strength of the background electrolyte as factors was used to estimate robustness. Based on the results, the method is robust enough for quantitation purposes.     

Metal furnace heated by flame as a hydride atomizer for atomic absorption spectrometry: Sb determination in environmental and pharmaceutical samples

The present work describes a metallic hydride atomizer for atomic absorption spectrometry, by evaluating the performance of the Inconel 600^® tube. For this purpose, stibine was used as the model volatile compound and antimony determination in river and lake sediments and in pharmaceutical samples was carried out to assess the metal furnace performance. Some parameters are evaluated such as those referring to the generation and transport of the hydride (such as KBH₄ and acid concentrations, carrier gas flow rate, injected volume, etc.), as well as those referring to the metal furnace (such as tube hole area, flame composition, long-term stability, etc.). The method presents linear Sb concentration from 2 to 80 μg L⁻¹ range (r > 0.998; n = 3) and the analytical frequency of ca. 140 h⁻¹. The limit of detection (LOD) is 0.23 μg L⁻¹ and the precision, expressed as R.S.D., is less than 5% (40 μg L⁻¹; n = 10). The accuracy is evaluated through the reference materials, and the results are similar at 95% confidence level according to the t-test.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Determination of site-site distance and site concentration within polymer beads: a combined swelling-electron paramagnetic resonance study

This work proposes a combined swelling-electron paramagnetic resonance (EPR) approach aiming at determining some unusual polymer solvation parameters relevant for chemical processes occurring inside beads. Batches of benzhydrylamine-resin (BHAR), a copolymer of styrene-1% divinylbenzene containing phenylmethylamine groups were, labeled with the paramagnetic amino acid 2,2,6,6-tetramethylpiperidine-1-oxyl-4-amine-4-carboxylic acid (TOAC), and their swelling properties and EPR spectra were examined in DCM and DMF. By taking into account the BHARs labeling degrees, the corresponding swelling values, and some polymer structural characteristics, it was possible to calculate polymer swelling parameters, among them, the volume and the number of sites per bead, site-site distances and site concentration. The latter values ranged from 17 to 170 A and from 0.4 to 550 mM, respectively. EPR spectroscopy was applied to validate the multistep calculation strategy of these swelling parameters. Spin-spin interaction was detected in the labeled resins at site-site distances less than approximately 60 A or probe concentrations higher than approximately 1 x 10(-2) M, in close agreement with the values obtained for the spin probe free in solution. Complementarily, the yield of coupling reactions in different resins indicated that the greater the inter-site distance or the lower the site concentration, the faster the reaction. The results suggested that the model and the experimental measurements developed for the determination of solvation parameters represent a relevant step forward for the deeper understanding and improvement of polymer-related processes.     

Antimony(III) Oxide Film on a Cellulose Fiber Surface: Preparation and Characterization of the Composite

Cellulose/antimony(III) oxide composites, Cel/Sb(2)O(3), with oxide loadings of 1.7, 5.4, and 9.2 wt% were prepared by reacting the precursor SbCl(3) reagent with cellulose in dry ethanol solution. The reaction of the Lewis acid and the cellulose fibers occurred at the~amorphous domains of the biopolymer, increasing the crystallinity degree of the composite compared with that of the untreated cellulose. The scanning electron microscopy images and metal mapping for all samples showed that the oxide film layer uniformly covered the fiber surfaces with no detectable agglomerates of the oxide particles. The synchrotron X-ray diffraction patterns indicated that the antimony oxide film was obtained as a crystalline phase with orthorombic structure. The atomic ratios of O/Sb, determined by X-ray photoelectron spectroscopy, indicated that, for Cel/Sb(2)O(3) samples with 9.3 wt% loading, the fiber surface is nearly saturated by the oxide layer. The thermal stability of Cel/Sb(2)O(3) compared to that of untreated cellulose is practically unaffected. Copyright 2000 Academic Press.     

Non-Born-Oppenheimer treatment of the H2 Hookean molecule

We show that the exact non-Born-Oppenheimer Schrodinger equation for the Hookean diatomic molecule H2 (a two-proton, two-electron system where the electron-proton interaction is harmonic while the proton-proton and electron-electron interactions are Coulombic) can be decoupled into equations describing the relative motion of the electrons, the relative motion of nuclei, the motion of a collective mode representing a three-dimensional harmonic oscillator, and the motion of a free particle expressed as a linear combination of the individual center-of-mass coordinates of the nuclei and electrons. Analytic solutions to the relative motion of electrons can be readily obtained for the given values of the harmonic coupling constant. However, exact analytic solutions to the equation for the relative motion of the nuclei cannot be obtained simultaneously due to the fact that the harmonic constants in these two equations are coupled. For this reason, we present for the relative nuclear motion approximate analytic wave functions, one of them obtained variationally and the other by a series solution where the coefficients are determined recursively. We also explore a variational solution to the Taylor-series expansion of the nuclear interaction potential. Properties of the electronic and nuclear intracule densities are examined at different values of the coupling constant. An interesting result of the present non-Born-Oppenheimer treatment of this harmonic model is the fact that the relative nuclear motion occurs in a highly correlated regime. This leads in a natural way to a spatial localization of the nuclei akin to Wigner electronic crystallization.     

Ester synthesis catalyzed by Mucor miehei lipase immobilized on magnetic polysiloxane-polyvinyl alcohol particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding with high activity recovered. The performance of the resulting immobilized biocatalyst was evaluated in the synthesis of flavor esters using heptane as solvent. The impact on reaction rate was determined for enzyme concentration, molar ratio of the reactants, carbon chain length of the reactants, and alcohol structure. Ester synthesis was maximized for substrates containing excess acyl donor and lipase loading of 25 mg/mL. The biocatalyst selectivity for the carbon chain length was found to be different concerning the organic acids and alcohols. High reaction rates were achieved for organic acids with 8 or 10 carbons, whereas increasing the alcohol carbon chain length from 4 to 8 carbons gave much lower esterification yields. Optimal reaction rate was determined for the synthesis of butyl caprylate (12 carbons). Esterification performance was also dependent on the alcohol structure, with maximum activity occurring for primary alcohol. Secondary and tertiary alcohols decreased the reaction rates by more than 40%.     

Synthesis and spectral properties of 2,3-dihydro-4-(para-substituted-phenyl)-7-[(o-, m-, and p-substituted)phenoxy]-1H-1,5-benzodi-azepine-2-thiones

A series of twelve new 2,3-dihydro-4-(para-substituted-phenyl)-7-[(o-, m-, and p-substituted)phenoxy]-1H-1,5-benzodiazepine-2-thiones, which have potentially useful pharmacological properties, has been synthesized by condensing the 3,3-dimercapto-1-(para-substituted phenyl)-2-propen-1-one with 3,4-diaminophenyl-R-phenyl ethers. The structure of all products was corroborated by ir, ¹H-nmr, ¹³C-nmr and ms.     

A flow-through cell for differential pulse anodic stripping voltammetry

A flow-through voltammetric cell with a hanging mercury drop electrode has been developed to fit the static mercury drop electrode (PAR 303). The design has resulted in a linear increase of sensitivity with flow rate and an enhancement of sensitivity by the wall-jet effect. The cell is used in a flow injection system in which samples are introduced with a R??i?ka—Hansen injector. The mercury drop is held at plating potentials while the sample peak passes through the cell. Stripping is done under stopped flow conditions, to reduce noise, after the sample has been washed completely from the cell. The stripping thus takes place into the carrier electrolyte which always has a constant composition independent of sample constituents. Film-forming interfering species will, however, remain on the surface of the mercury drop. The effect of medium exchange on films produced by l-cysteine is reported. The flow-through medium exchange simplifies deaeration, speeds up analysis and reduces contamination.     

Synthesis and spectral properties of 6H-2,7,7-trimethyl-4-(o,p-R-phenylamino)-7,8-dihydrofuro[3,2-c]azepines

The preparation of nine novel 6H-2,7,7-trimethyl-4(o-,p-R-phenylamino)-7,8-dihydrofuro[3,2-c]-azepines with possible pharmacological activity is described. The structure of all products was corroborated by ir, ¹H-nmr and ms.