Preparation and characterization of sulfonated polyimide ionomers via post‐sulfonation method for fuel cell applications

This paper describes our work on the synthesis of a series of sulfonated homo‐/co‐polyimides (SPI) which were obtained by post‐sulfonation method over three steps. In the first step, 4,4′‐oxydianiline (ODA) and 4,4′‐diaminodiphenylsulfone (DDS) dissolved in N‐methyl pyrrolidone (NMP) were reacted with benzophenonetetracarboxylic dianhydride (BTDA) in order to yield poly(amic acid) (PAA). Secondly, precipitated PAA was sulfonated via concentrated sulfuric acid (95–98%) at room temperature to give post‐sulfonated PAA (PSPAA). Finally, PSPAA was converted into post‐sulfonated PI (PSPI) by the thermal imidization method. PSPIs with ion exchange capacity (IEC) ranging from 0.20 to 0.67 meq/g were prepared. The thermal properties of the PSPIs were evaluated and high desulfonation temperature was found in the range of 190–350°C, suggesting the high stability of sulfonic acid groups. In water, PSPI‐5 membrane displayed similar proton conductivity to Nafion®117, whereas this membrane showed poor conductivity in dry state. All PSPIs displayed good solubility in common polar aprotic solvents such as NMP and dimethylacetamide (DMAc). Furthermore, the effects of post‐sulfonation reaction on chemical structure, thermal oxidative behavior, and physical properties of the PSPI membranes such as membrane quality/stability and water uptake were discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Supplier diversification under binomial yield

We consider supplier diversification in an EOQ type inventory setting with multiple suppliers and binomial yields. We characterize the optimal policy for the model and show that, in this case, it does not pay to diversify, in contrast to previous results in the random yield literature.     

Funktionen mit nichtnegativem Realteil in abstrakten Hardyalgebren

Ohne ZusammenfassungDer Verfasser führte seine Untersuchungen größtenteils während eines Gastaufenthaltes am Mathematischen Institut der Universität des Saarlandes durch. Er dankt der Alexander von Humboldt-Stiftung für großzügige Unterstützung während dieser Zeit.     

Eine neue Methode der organischen Elementaranalyse

Ohne Zusammenfassung     

A novel ditopic ring-expanded N-heterocyclic carbene ligand-assisted Suzuki-Miyaura coupling reaction in aqueous media

A series of seven-membered ditopic ring-expanded N-heterocyclic carbene (dre-NHC) precursors, bearing sterically demanding and electron-rich aryl groups, were synthesised in moderate yields via the reaction of 1,2,4,5-tetrakis(bromomethyl)benzene with the corresponding N,N′-diarylformamidines in the presence of K₂CO₃ in acetonitrile under an air atmosphere. All new compounds were characterised by HRMS, NMR spectroscopy, and microanalysis, as well as X-ray crystallography for compound 1c. The development of an efficient catalytic system for the Suzuki-Miyaura coupling reaction of aryl chlorides with various boronic acids was also investigated using the in situ generated dre-NHC ligands.     

Optimization of the liquid scintillation counting technique for the European interlaboratory comparison on gross α/β activity concentrations in water

A liquid scintillation counting (LSC) measurement method optimization for the gross α/β activity analysis in drinking waters with different chemical and radionuclide composition was performed. The optimized method was suitable to provide gross radioactivity results in drinking waters with the levels of the accuracy and precision similar to those obtained using other radioactivity screening techniques. Robust LSC results contributed to the calculation of gross α/β activity reference values of EC-JRC interlaboratory comparison water samples in 2012. Some of the most common errors in the determination of the gross radioactivity using the LSC are presented.

     

Dependency of thermal and electrical conductivity on temperature and composition of Sn in Pb–Sn alloys

The variations of thermal conductivity with temperature for Pb–Sn alloys were measured using a radial heat flow apparatus. The variations of electrical conductivity with the temperature for same alloys were determined from the Wiedemann–Franz law by using the measured values of thermal conductivity. According to present experimental results, the thermal and electrical conductivity of Pb–Sn alloys linearly decrease with increasing temperature but exponentially increase with increasing the composition of Sn. The enthalpy of fusion and the change of specific heat for Pb–Sn alloys were also determined by means of differential scanning calorimeter (DSC) from heating trace during the transformation from eutectic liquid to eutectic solid.     

An Analysis of Low Frequency Discharge in a CH3SiCl3-Ar-H2 Mixture by Optical Emission Spectroscopy and Actinometry

Low frequency (100 kHz) discharge in Ar-H₂ and CH₃SiCl₃-Ar-H₂ mixtures was studied to obtain information on the processes involved in plasma deposition of Si_xC_y:H films from CH₃SiCl₃-Ar-H₂ plasma once the properties of Ar-H₂ plasma are known. The plasmas were studied using optical emission spectroscopy. The addition of small amounts of nitrogen to the plasma mixtures also permitted the use of an actinometry technique. First, plasma parameters (electron density and temperature) and actinometric concentrations of atomic hydrogen in an argon–hydrogen plasma were investigated as a function of the hydrogen content in the feed. Second, the emission intensities of Si, Si⁺, CH, H, Ar and Ar⁺ species produced in the CH₃SiCl₃-Ar-H₂ discharge were analysed as a function of time following the introduction of CH₃SiCl₃ (methyltrichlorosilane, MTCS) to the argon–hydrogen plasmas with various proportions of the feed gasses. The results reveal a rapid decay of the Si-excited state number density versus time, while those of Si⁺ and CH fell off more slowly. The emission of atomic silicon was believed to be a result of electron impact dissociative and excitation processes occurring in the bulk of the discharge, whereas the Si⁺ and CH seemed to originate mainly from products of sputtering of the growing film surface. The fragmentation of the MTCS associated with HCl formation and enhanced atomic hydrogen production as a result of HCl dissociation are proposed. Variations in the radical densities of H and CH₃ were determined using an actinometry technique. The results indicate a significant role for H₂ in gas-phase reactions occurring in the CH₃SiCl₃-Ar-H₂ plasma, as well as in gas-surface interactions, leading to competition between deposition and chemical sputtering of already deposited material.     

Lippia origanoides chemotype differentiation based on essential oil GC‐MS and principal component analysis

Chromatographic (GC/flame ionization detection, GC/MS) and statistical analyses were applied to the study of essential oils and extracts obtained from flowers, leaves, and stems of Lippia origanoides plants, growing wild in different Colombian regions. Retention indices, mass spectra, and standard substances were used in the identification of 139 substances detected in these essential oils and extracts. Principal component analysis allowed L. origanoides classification into three chemotypes, characterized according to their essential oil major components. α‐ and β‐phellandrenes, p‐cymene, and limonene distinguished chemotype A; carvacrol and thymol were the distinctive major components of chemotypes B and C, respectively. Pinocembrin (5,7‐dihydroxyflavanone) was found in L. origanoides chemotype A supercritical fluid (CO₂) extract at a concentration of 0.83±0.03 mg/g of dry plant material, which makes this plant an interesting source of an important bioactive flavanone with diverse potential applications in cosmetic, food, and pharmaceutical products.