Stimuli-responsive electrospun fibers and their applications

Stimuli-responsive electrospun nanofibers are gaining considerable attention as highly versatile tools which offer great potential in the biomedical field. In this critical review, an overview is given on recent advances made in the development and application of stimuli-responsive fibers. The specific features of these electrospun fibers are highlighted and discussed in view of the properties required for the diverse applications. Furthermore, several novel biomedical applications are discussed and the respective advantages and shortcomings inherent to stimuli-responsive electrospun fibers are addressed (136 references).     

Growth mechanisms involved in the synthesis of smooth and microtextured films by acetylene magnetron discharges

The growth of hydrogenated amorphous carbons (a-C:H) produced by continuous or pulsed discharges of acetylene (C(2)H(2)) in an unbalanced magnetron setup was investigated. At 5 × 10(-3) Torr, only smooth films are obtained, whereas at 5 × 10(-1) Torr using a pulsed discharge some microtextured films are formed if the duty cycle is low. The morphology of these microtextured films consists of nanoparticles, filamentary particles, and particular agglomerates ("microflowers"). This paper presents a study of acetylene gas phase polymerization by mass spectrometry, and a detailed analysis of bulk structure of films by combining three techniques which include IR spectroscopy, Raman spectroscopy, and laser desorption/ionization Fourier transform mass spectrometry (LDI-FTMS). Finally, based on the study of gas phase and film structure, we propose a model for the growth of both smooth and microtextured films.     

Influence of surface roughness on cetyltrimethylammonium bromide adsorption from aqueous solution

The influence of surface roughness on surfactant adsorption was studied using a quartz crystal microbalance with dissipation (QCM-D). The sensors employed had root-mean-square (R) roughness values of 2.3, 3.1, and 5.8 nm, corresponding to fractal-calculated surface area ratios (actual/nominal) of 1.13, 1.73, and 2.53, respectively. Adsorption isotherms measured at 25 °C showed that adsorbed mass of cetyltrimethylammonium bromide per unit of actual surface area below 0.8 cmc, or above 1.2 cmc, decreases as the surface roughness increases. At the cmc, both the measured adsorbed amount and the measured dissipation increased dramatically on the rougher surfaces. These results are consistent with the presence of impurities, suggesting that roughness exacerbates well-known phenomena reported in the literature of peak impurity-related adsorption at the cmc. The magnitude of the increase, especially in dissipation, suggests that changes in adsorbed amount may not be the only reason for the observed results, as aggregates at the cmc on rougher surfaces are more flexible and likely contain larger amounts of solvent. Differences in adsorption kinetics were also found as a function of surface roughness, with data showing a second, slower adsorption rate after rapid initial adsorption. A two-rate Langmuir model was used to further examine this effect. Although adsorption completes faster on the smoother surfaces, initial adsorption at zero surface coverage is faster on the rougher surfaces, suggesting the presence of more high-energy sites on the rougher surfaces.     

Regioselectivity of the Claisen rearrangement in meta-allyloxy aryl ketones: an experimental and computational study, and application in the synthesis of (R)-(-)-pestalotheol D

A study of the regioselectivity of the Claisen rearrangement of meta-allyloxy aryl ketones showed that the electron-withdrawing carbonyl group has a major influence and strongly directs rearrangement to the more hindered ortho position. However, when the ketone is part of a ring structure, its electronic effect can be negated by conversion into its triisopropylsilyl enol ether, which dramatically reverses the regiochemistry of the Claisen rearrangement. DFT calculations suggest that the effect is electronic although there is also a steric effect of the bulky silyl group. This strategy for influencing the regiochemical outcome of the Claisen rearrangement was then employed in a short synthesis of the furo[2,3-g]chromene, (-)-pestalotheol D, that confirms the absolute stereochemistry of the natural product.     

Differentiation of Regioisomeric Aromatic Ketocarboxylic Acids by Positive Mode Atmospheric Pressure Chemical Ionization Collision-Activated Dissociation Tandem Mass Spectrometry in a Linear Quadrupole Ion Trap Mass Spectrometer

Positive-mode atmospheric pressure chemical ionization tandem mass spectrometry (APCI-MS ⁿ ) was tested for the differentiation of regioisomeric aromatic ketocarboxylic acids. Each analyte forms exclusively an abundant protonated molecule upon ionization via positive-mode APCI in a commercial linear quadrupole ion trap (LQIT) mass spectrometer. Energy-resolved collision-activated dissociation (CAD) experiments carried out on the protonated analytes revealed fragmentation patterns that varied based on the location of the functional groups. Unambiguous differentiation between the regioisomers was achieved in each case by observing different fragmentation patterns, different relative abundances of ion-molecule reaction products, or different relative abundances of fragment ions formed at different collision energies. The mechanisms of some of the reactions were examined by H/D exchange reactions and molecular orbital calculations.     

Stereochemical dependence of 3JCH coupling constants in 2-substituted 4-t-butyl-cyclohexanone and their alcohol derivatives

Theoretical and experimental studies on (3)J(C2H6eq) NMR spin-spin coupling constants in both the 2-X-4-t-butyl-cyclohexanone (X = H, CH(3), F, Cl, and Br) and in their alcohol derivatives series are reported. Results thus found are rationalized in terms of the transmission of the Fermi contact contribution to such couplings. To this end, dependencies of (3)J(C2H6eq) couplings versus the C(2)-C(1)-C(6) angle are compared in both series for equatorial and axial X orientations. The main trend is described in terms of the rear lobes interaction. Besides, for X = halogen atom in equatorial orientation a rather strong interaction between oxygen and halogen lone pairs is observed, and its influence on (3)J(C2H6eq) couplings is discussed and rationalized in terms of different Fermi contact transmission pathways.     

Polynomial approximation of nonlinear differential systems with prefixed accuracy

This paper presents a method for constructing polynomial approximations of the solutions of nonlinear initial value systems of differential equations. Given an a priori chosen accuracy, the degree of the vector polynomial can be adapted so that the approximate solution has the required precision. The method is based on the AI-method of Dzyadyk developed for the scalar case, and the computational cost is shown to be competitive with other methods.     

Highly polar carbohydrates stack onto DNA duplexes via CH/π interactions

Carbohydrate-nucleic acid contacts are known to be a fundamental part of some drug-DNA recognition processes. Most of these interactions occur through the minor groove of DNA, such as in the calicheamicin or anthracycline families, or through both minor and major groove binders such as in the pluramycins. Here, we demonstrate that carbohydrate-DNA interactions are also possible through sugar capping of a DNA double helix. Highly polar mono- and disaccharides are capable of CH/π stacking onto the terminal DNA base pair of a duplex as shown by NMR spectroscopy. The energetics of the carbohydrate-DNA interactions vary depending on the stereochemistry, polarity, and contact surface of the sugar involved and also on the terminal base pair. These results reveal carbohydrate-DNA base stacking as a potential recognition motif to be used in drug design, supramolecular chemistry, or biobased nanomaterials.     

Templated synthesis of glycoluril hexamer and monofunctionalized cucurbit[6]uril derivatives

We report that the p-xylylenediammonium ion (11) acts as a template in the cucurbit[n]uril forming reaction that biases the reaction toward the production of methylene bridged glycoluril hexamer (6C) and bis-nor-seco-CB[10]. Hexamer 6C is readily available on the gram scale by a one step synthetic procedure that avoids chromatography. Hexamer 6C undergoes macrocylization with (substituted) phthalaldehydes 12, 14, 15, and 18-in 9 M H(2)SO(4) or concd HCl at room temperature to deliver monofunctionalized CB[6] derivatives 13, 16, 17, and 19-that are poised for further functionalization reactions. The kinetics of the macrocyclization reaction between hexamer and formaldehyde or phthalaldehyde depends on the presence and identity of ammonium ions as templates. p-Xylylenediammonium ion (11) which barely fits inside CB[6] sized cavities acts as a negative template which slows down transformation of 6C and paraformaldehyde into CB[6]. In contrast, 11 and hexanediammonium ion (20) act as a positive template that promotes the macrocyclization reaction between 6C and 12 to deliver (±)-21 as a key intermediate along the mechanistic pathway to CB[6] derivatives. Naphthalene-CB[6] derivative 19 which contains both fluorophore and ureidyl C═O metal-ion (e.g., Eu(3+)) binding sites forms the basis for a fluorescence turn-on assay for suitable ammonium ions (e.g., hexanediammonium ion and histamine).