Spectroscopic evidence for triplet excitation energy transfer among carotenoids in the LH2 complex from photosynthetic bacterium <Emphasis Type="Italic">Rhodopseudomonas palustris</Emphasis>

The LH2 complex from Rhodopsudomonas (Rps.) palustris is unique in the heterogeneous carotenoid compositions. The dynamics of triplet excited state Carotenoids (³Car* has been investigated by means of sub-microsecond time-resolved absorption spectroscopy both at physiological temperature (295 K) and at cryogenic temperature (77K). Broad and asymmetric T _n ←T ₁ transient absorption was observed at room temperature following the photo-excitation of Car at 532 nm, which suggests the contribution from various carotenoid compositions having different numbers of conjugated C=C double bonds (N_c=c). The triplet absorption bands of different carotenoids, which superimposed at room temperature, could be clearly distinguished upon decreasing the temperature down to 77 K. At room temperature the shorter-wavelength side of the main T_n04T₁ absorption band decayed rapidly to reach a spectral equilibration with a characteristic time constant of ∽1 μs, the same spectral dynamics, however, was not observed at 77 K. The aforementioned spectral dynamics can be explained in terms of the triplet-excitation transfer among heterogeneous carotenoid compositions. Global spectral analysis was applied to the time-resolved spectra at room temperature, which revealed two spectral components peaked at 545 and 565 nm, and assignable to the T_n04 T₁ absorption of Cars with Nc=c=11 and Nc=c=13, respectively. Surprisingly, the decay time constant of a shorter-conjugated Car, i.e. 0.72 ώs (aerobic) and 1.36 ώs (anaerobic), is smaller than that of a longer-conjugated Car, i.e. 2.12 us (aerobic) and 3.75 ώs (anaerobic), which is contradictory to the general rule of carotenoids and relative polyenes. The results are explained in terms of triplet-excitation transfer among different types of Cars. It is postulated that two Cars with different conjugation lengths coexist in an α, β-subunit in the LH2 complex.     

有机溶剂与水溶液引入电感耦合等离子体电子密度和电子温度轴向分布的比较

为了研究有机ICP最佳分析条件与水溶液ICP明显不同的原因,本文在不同的等离子体操作条件下测量了Hβ486.133nm Stark变宽,分别计算了有机溶剂和水溶液引入1CP轴向的n_e和Te值,并进行了比较。有机溶剂引入ICP时,在固定的功率,观测高度及载气流量下其轴向ne和Te均比用水溶液引入时低一些。有机ICP的优异分析性能只有在比水溶液ICP有较高的入射功率和较低的载气流量条件下才能展现出来。     

Fast and continuous chemical isolation of short-lived isotopes of Hf,Ta and W as homologs of elements 104, 105 and 106

Some short-lived isotopes of Hf, Ta and W, synthesized at the U-400 cyclotron of JINR-Dubna, have been isolated using a previously elaborated fast continuous method of chemical isolation of element 104 from nuclear reaction products. The products were transported by a NaCl aerosol jet, from the irradiated targets to a separation device in which Hf, Ta and W were isolated by using three coupled ion-exchange columns.     

Analysis of Chlorogenic Acid in Herbal Medicines by Capillary Electrophoresis

Atpresent,thecommonlyusedmethodforanalyzingherbalmedicinesishighperformanceliquidchromatography(HPLC).However,theuseofHPLCisrestrictedformanyreasons.Themostseriousproblemisthatthechromatographiccolumniseasilycontaminated.ComparedwithHPLC,capillaryelectrophoresis(CE)ischaracterizedwithhighefficiency,rapidity,lowcostandmultiplemodestobechosen.Inaddition,thecapillarycanbeeasilyregenerated.SoCEisidealforanalyzing"dirty"samples,suchasChineseherbalmedicines.Infact,studiesintheareaarebecoming…     

Modeling and electrokinetic evidences on the processes of the Al(III) sorption continuum in SiO2(s) suspension

Reactions of Al(III) at the interface between SiO2(s) and aqueous solution were characteristically and quantitatively studied using electrophoretic methods and applying a surface complexation/precipitation model (SCM/SPM). The surface and bulk properties of Al(III)/SiO2 suspensions were determined as functions of pH and initial Al(III) concentration. Simulated modeling results indicate that the SCM, accounting for the adsorption mechanism, predicts sorption data for low surface coverage only reasonably well. Al(III) hydrolysis and surface hydroxide precipitation must be invoked as the Al(III) concentration and/or pH progressively increase. Accordingly, the three processes in the Al(III) sorption continuum, from adsorption through hydrolysis to surface precipitation, could be identified by the divergence between the SCM/SPM predictions and the experimental data. SiO2(s) suspensions with low Al(III) concentrations (1 x 10(-4) and 1 x 10(-5) M) exhibit electrophoretic behavior similar to that of a pure SiO2(s) system. In Al(III)/SiO2 systems with high Al concentrations of 1 x 10(-3), 5 x 10(-3) and 1 x 10(-2) M, three charge reversals (CR) are observed, separately representing, in order of increasing pH, the point of zero charge (PZC) on the SiO2 substrate (CR1), the onset of the surface precipitation of Al hydroxide (CR2), and at a high pH, the PZC of the Al(OH)3 coating (CR3). Furthermore, in the 1 x 10(-3) M Al(III)/SiO2(s) system, CR2 is consistent with the modeling results of SCM/SPM and provides evidence that Al(III) forms a surface precipitate on SiO2(s) at pH above 4. SiO2(s) dissolution was slightly inhibited when Al(III) was adsorbed onto the surface of SiO2(s), as compared to the dissolution that occurs in a pure SiO2(s) suspension system. Al hydroxide surface precipitation dramatically reduced the dissolution of SiO2(s) because the Al hydroxide passive film inhibited the corrosion of the SiO2(s) surface by OH- ions.     

Two New ent-Kaurane Diterpenoids from Isodon xerophilus

In continuation of our research on diterpenoids in the Isodon species, several newcompounds"' were obtained from the leaves oflsodon xerophilus (C. Y. Wu et H. W. Li)H. Hara (Labiatae), a perennial shrub native to Yunnan province. Further fractionation ofthe EtOAc extract led to the isolation of tWo new enl-kauranoids, xerophilusin E (l) andxerophilusin F (2). This paper deals with the structUral elucidation of the newcompounds.Xerophilusin E (l), a minor constitUent, was obtained as p…     

Analysis of functional groups on the surface of plasma-treated carbon nanofibers

Plasma chemically modified carbon nanofibers were characterized by X-ray photoelectron spectroscopy with regard to the content of carbon, oxygen, and nitrogen and the contribution of carboxylic groups or ester, carbonyl and hydroxylic groups or ether on the surface. Unfortunately, X-ray photoelectron spectroscopy only provides an average value of the first 10 to 15 molecular layers. For comparison, depth profiles were measured and wet chemical methods were applied to estimate the thickness of the functionalized layer and the distribution of oxygen-containing functional groups within the near-surface layers. The results indicate that the fiber surface is covered by a monomolecular oxygen-containing layer and that plasma treatment allows a complete oxygen functionalization of the uppermost surface layer. The best conditions for plasma treatment found within the set of parameters applied to generate complete functionalization are: plasma gas O(2)/Ar ratio 1:1, gas pressure 1-1.5 hPa, plasma power 80 W, treatment time >or= 5 min. Additionally, three quick and easy methods are presented to estimate the efficiency of plasma treatment with regard to surface functionalization: pyrolysis, contact angle measurements, and light permeability measurements of aqueous carbon nanofiber suspensions.     

Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.     

Preliminary study on dual fluorescence behavior of porphyrin

It is well known that porphyrin derivatives play a key role in the primary process of photo-synthesis[1], in which porphyrins directly absorb the sunlight or indirectly acquire excitation en-ergy from light-harvesting antenna system to reach their excited state, and then donate electrons to quinone acceptors to yield a series of charge-separated species. In general, only first singlet ex-cited state of porphyrins is involved in energy transfer process[2]. However, highly excited state (S2 stat…     

A New Hydroxo‐bridged Chromium(III) Dimer [Cr(saltn)OH]2·4H2O: Synthesis,Crystal Structure and Magnetic Properties

A new hydroxo‐bridged dimeric Cr(III) complex [Cr(saltn)OH]₂·4H₂O [H₂saltn=N,N′‐bis(salicylidene)trimethylenediamine] has been synthesized and its structural and magnetic properties have been investigated. The complex crystallizes in the triclinic space group P‐1 with one dimeric formula unit in a cell of dimensions a=0.95828(19) nm, b=0.95926(19) nm, c=1.0437(2) nm, α=86.77(3)°, β=82.48(3)°, and γ=64.93(3)°. The geometry around each chromium(III) center is six‐coordinate, distorted‐octahedral. The bridging Cr₂O₂ unit is strictly planar, as required by the crystallographic symmetry. The Cr? O? Cr′ bridging angle is 99.94(16)°, and the distance between Cr…Cr′ is 0.3019 nm. The magnetic susceptibility of the complex has been examined in the range of 2‐300 K. By using the spin‐spin coupled model for an S₁=S₂=3/2 dimeric system , the magnetic data were fitted to give the parameters of g=2.01(1), J=‐0.85(2) cm^‐1, and zJ' =0.18(3)cm^‐1, indicating the presence of a weak antiferromagnetic spin‐exchange interaction between the Cr(III) ions in the binuclear complex.