Viscoelasticity and water plasticization of polymer-cellulose composite films and paper sheets

Viscoelastic properties of cellulose microfibril—polymer composites and paper sheets were studied with dynamic mechanical analysis as a function of relative humidity in order to assess the bonding properties in cellulosic networks. The amount of associated water in the composites (equilibrium moisture content) was measured by thermogravimetry. Water plasticization was evidenced by DMA both in composite and paper samples. Polymers with high affinity to water, e.g. carboxymethyl cellulose, clearly increased the water plasticization in the composites. The plasticization behavior of paper sheet samples was also influenced by polymers. However, the effect of polymers on the plasticization was different between the composite and the paper samples. The consideration of fiber bonding domain in paper structure as a gel-like layer consisting of cellulose microfibrils, polymers, and associated water can help to unveil some of the complex mechanisms behind the strength in fibrous cellulosic materials.     

Luminescence Enhancement from Silica-Coated Gold Nanoparticle Agglomerates Following Multi-photon Excitation

Multi-photon absorption induced luminescence (MAIL) from bare gold nanoparticles, silica-coated particles, as well as silica-coated agglomerated gold nanoparticles suspended in aqueous solution was studied by using time-resolved and steady-state luminescence spectroscopy. The nanoparticles were excited by femtosecond pulses of wavelengths ranging from 630 nm to 900 nm. The luminescence from the particles exhibits a broad spectrum in the UV and VIS region. The time-resolved measurements indicate a luminescence lifetime of a few ps, limited by the response of the experimental system. The studied dependence of the MAIL efficiency on the excitation wavelength showed that the luminescence from silica-coated agglomerates was enhanced over the whole range of excitation wavelengths, when compared to the luminescence from individual gold nanoparticles. The agglomerates show an almost excitation wavelength independent efficiency of the MAIL, while for individual nanoparticles a rapid decrease of the MAIL efficiency was observed with increasing excitation wavelength. The observed enhancement of the MAIL from the agglomerated nanostructures can be attributed to the presence of localized surface plasmon resonances in the spectral region corresponding to the excitation wavelengths. The high MAIL efficiency from the agglomerated nanoparticle structures in the near-infrared could be an advantage in the expanding field of luminescence-based-imaging, as well as in biosensor technology.     

Efficient Conversion of Thioglycosides into Glycosyl Fluorides Using Dimethyl(methylthio)sulfonium Tetrafluoroborate

Abstract

Alkyl and aryl thioglycosides were converted in high yield into the corresponding α-glycosyl fluorides by treatment with dimethyl(methylthio)-sulfonium tetrafluoroborate. Glycosidic linkages and most protective groups are not affected by the reaction conditions. Glycosyl fluorides are proposed to be intermediates in glycosylations promoted by dimethyl(methylthio)-sulfonium tetrafluoroborate.     

Ultra-sensitive high-precision spectroscopy of a fast molecular ion beam

Direct spectroscopy of a fast molecular ion beam offers many advantages over competing techniques, including the generality of the approach to any molecular ion, the complete elimination of spectral confusion due to neutral molecules, and the mass identification of individual spectral lines. The major challenge is the intrinsic weakness of absorption or dispersion signals resulting from the relatively low number density of ions in the beam. Direct spectroscopy of an ion beam was pioneered by Saykally and co-workers in the late 1980s, but has not been attempted since that time. Here, we present the design and construction of an ion beam spectrometer with several improvements over the Saykally design. The ion beam and its characterization have been improved by adopting recent advances in electrostatic optics, along with a time-of-flight mass spectrometer that can be used simultaneously with optical spectroscopy. As a proof of concept, a noise-immune cavity-enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) setup with a noise equivalent absorption of ~2 × 10(-11) cm(-1) Hz(-1/2) has been used to observe several transitions of the Meinel 1-0 band of N(2) (+) with linewidths of ~120 MHz. An optical frequency comb has been used for absolute frequency calibration of transition frequencies to within ~8 MHz. This work represents the first direct spectroscopy of an electronic transition in an ion beam, and also represents a major step toward the development of routine infrared spectroscopy of rotationally cooled molecular ions.     

Electrospray ionization ion-trap multiple-stage mass spectrometry of Quillaja saponins

Fifteen identified C-18 fatty acyl-containing saponin structures from Quillaja saponaria Molina have been investigated by electrospray ionization ion-trap multiple-stage mass spectrometry (ESI-IT-MS(n)) in positive ion mode. Their MS(1)-MS(3) spectra were analyzed and ions corresponding to useful fragments, important for the structural identification of Quillaja saponins, were recognized. A few key fragments could describe the structural variations in the C-3 and the C-28 oligosaccharides of the Quillaja saponins. A flowchart involving a stepwise procedure based on key fragments from the MS(1)-MS(3) spectra of these saponins, together with key fragments from these saponins and 13 previously investigated saponins, was constructed for the identification of structural elements in Quillaja saponins. Peak intensity ratios in MS(3) spectra were found to be correlated to structural features of the investigated saponins and is therefore of value for the identification of regioisomers.     

The aqueous phase behavior of polyion-surfactant ion complex salts mixed with nonionic surfactants

The aim of this work was to study intermolecular interactions in systems containing charged polyion (polyacrylate, PA(-)), charged surfactant (C(16)TA(+)) and nonionic surfactant (C(12)E(5) or C(12)E(8)). To achieve this we have created four different phase diagrams using two different so-called complex salts, C(16)TAPA(25) and C(16)TAPA(6000), both consisting of positively charged surfactant (C(16)TA(+)) with polyacrylate (PA(-)) as counterions (no simple salt). The difference between the salts is the length of the polyion (25 or 6000 monomers). Both are insoluble in water. The results revealed that decreasing polyion length and increasing the PEO chain length of the nonionic surfactant were important factors for increasing the solubility of the complex salt. We also found that the curvature effects are quite small at low water content when gradually exchanging C(12)E(8) for either one of the complex salts while there is a gradual change in curvature for the systems containing C(12)E(5). Another interesting observation was the possibility for relatively large amounts of complex salt to be incorporated into a V(1) (Ia3d, bicontinuous) phase in the C(12)E(8)-containing systems. This gives rise to several questions regarding arrangements and dynamics of the polyion in this phase. In the dilute regime several different liquid crystalline phases can coexist with a dilute liquid phase containing the nonionic surfactant.     

Maximum likelihood prediction

The principle of maximum likelihood is applied to the joint prediction and estimation of a future random variable and an unknown parameter. We assume dependence between present and future, and the approach is non-Bayesian. Our principal application is to the prediction of higher order statistics from lower ones in Type II censored random samples. Some simple criteria for existence and uniqueness of the predictor are given for this situation and the methods are illustrated with several examples.