Theoretical STM images of alkaline-earth metal adsorbed Si(1 1 1)3 × 2 surfaces

We have performed total-energy calculations to study theoretical scanning tunneling microscopy (STM) images of the Si(1 1 1)3 × 2 surfaces induced by the adsorption of alkaline-earth metals (AEMs). Previously, in a series of works on Ba/Si(1 1 1) system, we have found that the observed Si(1 1 1)3 × 1-Ba LEED phase indeed has a 3 × 2 periodicity with a Ba coverage of 1/6 ML and the HCC substrate structure. Based on results of the Ba case, we proposed that the HCC structure is also adopted for other AEM atoms, which was confirmed by our recent work. In this paper, we mainly report the STM simulations for different AEM systems to compare with existing experimental data. We discuss the difference in the detailed STM images for different AEM adsorbates. Especially, the difference in filled-state images between Mg and other AEM atoms is attributed to the strong Mg-Si interaction.     

Structural and electrical properties of core–shell structured GaP nanowires with outer Ga2O3 oxide layers

This paper presents a review of our current experimental research on GaP nanowires grown by a vapor deposition method. Their structural, electrical, opto-electric transport, and gas-adsorption properties are reviewed. Our structural studies showed that a GaP nanowire consisted of a core–shell structure with a single-crystalline GaP core and an outer Ga₂O₃ layer. The individual GaP nanowires exhibited n-type field effects. Their electron mobilities were in the range of about 6 to 22 cm²/V s at room temperature. When the nanowires were illuminated with an ultraviolet light source, an abrupt increase of conductance occurred resulting from carrier generation in the nanowire and de-adsorption of adsorbed OH^- or O₂ ^- ions on the Ga₂O₃ surface shell. Using an intrinsic Ga₂O₃ shell layer as a gate dielectric, top-gated GaP nanowire field-effect transistors were fabricated and characterized. Like other metal oxide nanowires, the carrier concentration and mobility of GaP nanowires were significantly affected by the surface molecular adsorption of OH or O₂. The GaP nanowire devices were fabricated as sensors for NO₂, NH₃, and H₂ gases by using a simple metal decoration technique. PACS 73.63.-b; 72.80.Ey; 85.35.-p     

High-pressure effect on the crystal and magnetic structure of LuMnO3: Correlation between a distortion of the triangular lattice and the symmetry of the magnetic state in hexagonal frustrated manganites

The effect of a high pressure (up to 6 GPa) on the crystal and magnetic structure of the hexagonal manganite LuMnO₃ is studied by neutron diffraction in the temperature range 10–295 K. It is found that, as the pressure increases, the ordered magnetic moment of Mn ions at T = 10 K decreases noticeably from 2.48 (0 GPa) to 1.98 μ_B (6 GPa). This decrease is due to an enhancement of the geometrical frustration effects on the triangular lattice. At the same time, the symmetry of the triangular antiferromagnetic state (the irreducible representation Γ₂) remains unchanged. A correlation is revealed between the distortion parameter of the triangular lattice formed by Mn ions and the symmetry of the antiferromagnetic state of hexagonal manganites RMnO₃. Based on this correlation, a generalized magnetic phase diagram of these compounds is constructed. The obtained phase diagram provides an explanation for the changes observed in the magnetic state of hexagonal manganites caused by high pressure and chemical substitution.     

Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

Fluorescence anisotropy decay study of self-association of bacterial luciferase intermediates

The fluorescence dynamics parameters of the fluorescent transient flavin-luciferase species from the typesVibrio fischeri andPhotobacterium leiognathi are presented. The fluorescence anisotropy decay is a single exponential function for both types. The correlation time is 70 ns for theP. leiognathi fluorescent transient intermediate (2°C, aqueous buffer, pH 7.0), consistent with the rotational correlation time of the luciferase macromolecule (77 kD) to which the flavin fluorophore is rigidly attached. In contrast, for theV. fischeri species the observed correlation time for the anisotropy decay function is 133 ns. This suggests that protein self-association occurs in theV. fischeri case and this is confirmed by filtration, where the fluorescent transient fromV. fischeri does not pass through a 100,000 molecular weight cutoff membrane, whereas theP. leiognathi species does. The filtration method also demonstrates self-association in the luciferase peroxyflavin and photoflavin fromV. fischeri. A monomer-dimer equilibrium also explains the previously reported high correlation times for theV. harveyi luciferase-flavin species. It is proposed that the self-association competes with the lumazine protein interaction in the bioluminescence reaction.     

Regioselective construction of polysubstituted benzene ring from Baylis-Hillman adduct via [4+2] annulation strategy

A new and regioselective [4+2] benzannulation protocol toward polysubstituted benzenes was developed. Nitroalkane derivative, which was prepared from Baylis-Hillman adduct, served as the four-carbon unit and Michael acceptor as a two-carbon unit.     

An experimental and computational investigation of crack initiation and stable crack growth of ductile materials

Crack initiation and stable crack growth under monotonic loading in steels has been studied using an elastic-plastic finite element analysis. The fracture criterion used for crack initiation and stable crack growth was the critical strain energy density. In addition the shift core method for the analysis of crack extension was used. In the shift core modelling method, crack advance is simulated by moving the coordinates of the core region which surrounds the crack tip, to obtain the stiffness reduction. Simultaneously the core itself geometrically undergoes a simple rigid-body motion or translation during the crack extension. The analytically calculated and experimentally measured load for crack initiation and the subsequent stable crack growth agreed well.     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.