Frequency-Dependent Streaming Potentials

An experimental apparatus and data acquisition system was constructed to measure the streaming potential coupling coefficients as a function of frequency. The purpose of the experiments was to measure, for the first time, the real and imaginary portion of streaming potentials. In addition, the measured frequency range was extended beyond any previous measurements. Frequency-dependent streaming potential experiments were conducted on one glass capillary and two porous glass filters. The sample pore diameters ranged from 1 mm to 34 μm. Two frequency-dependent models (Packard and Pride) were compared to the data. Both Pride's and Packard's models have a good fit to the experimental data in the low- and intermediate-frequency regime. In the high-frequency regime, the data fit the theory after being corrected for capacitance effects of the experimental setup. Pride's generalized model appears to have the ability to more accurately estimate pore sizes in the porous medium samples. Packard's model has one unknown model parameter while Pride's model has four unknown model parameters, two of which can be independently determined experimentally. Pride's additional parameters may allow for a determination of permeability. Copyright 2001 Academic Press.     

Electron-impact-induced fragmentation of aromatic cyclic diazoketones

The mass spectra of eleven diazoketones have been obtained. High resolution mass measurements of selected ions have shown initial loss of nitrogen followed by loss of carbon monoxide. In many of the spectra, flat-topped metastables were observed.     

Use of electrospray mass spectrometry (ESI-MS) for the study of europium(III) complexation with bis(dialkyltriazinyl)pyridines and its implications in the design of new extracting agents

ESI mass spectrometry was used to investigate the europium complexation by tridentate ligands L identical with 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)-pyridines (DATP) that have shown unique separation properties of actinides(III) from lanthanides(III) in nitric acid solutions. Complexes of three ligands, namely methyl (DMTP), n-propyl (DnPTP), and iso-propyl (DiPTP), have been investigated in acidic solutions to check the aqueous-phase stability of Eu(L)(3)(3+) ions identified previously in the solid state. The data obtained show, first, the presence of stable Eu(L)(3)(3+) ions with DnPTP (log beta(3)(app) = 12.0 +/- 0.5) and DiPTP (log beta(3)(app) = 14.0 +/- 0.6) in methanol/water (1:1 v/v) solutions under pH range 2.8-4.6 and, second, a mechanism whereby alkyl moieties contribute to a self-assembling process leading to the formation of Eu(L)(3)(3+) ions. Other complexes such as Eu(L)(2)(3+) ions are only observed for DnPTP (log beta(2)(app) = 6.7 +/- 0.5) and DMTP (log beta(2)(app) = 6.3 +/- 0.1) and Eu(L)(3+) only for DMTP (log beta(1)(app) = 2.9 +/- 0.2). The log beta(n)(app) values for the Eu(L)(n)(3+) (n = 1-3) complexes were determined at pH 2.8. Better insight was given in this study concerning the role of the hydrophobic exterior of the ligands for the design of a new range of extracting agents.     

Reaction of bis(phosphine)(hydrotris(3,5-dimethylpyrazolyl)borato)rhodium(I) with phenylacetylene,p-nitrobenzaldehyde,and triphenyltin hydride: structures of [Rh(Tp)(PPh(3))(2)], [Rh(Tp)(H)(C(2)Ph)(P(4-C(6)H(4)F)(3))], [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PPh(3))], and [Rh(Tp)(H)(SnPh(3))(PPh(3))

The complexes [Rh(Tp)(PPh(3))(2)] (1a) and [Rh(Tp)(P(4-C(6)H(4)F)(3))(2)] (1b) combine with PhC(2)H, 4-NO(2)-C(6)H(4)CHO and Ph(3)SnH to give [Rh(Tp)(H)(C(2)Ph)(PR(3))] (R = Ph, 2a; R = 4-C(6)H(4)F, 2b), [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PR(3))] (R = Ph, 3a), and [Rh(Tp)(H)(SnPh(3))(PR(3))] (R = Ph, 4a; R = 4-C(6)H(4)F, 4b) in moderate to good yield. Complexes 1a, 2b, 3a, and 4a have been structurally characterized. In 1a the Tp ligand is bidentate, in 2b, 3a, and 4a it is tridentate. Crystal data for 1a: space group P2(1)/c; a = 11.9664(19), b = 21.355(3), c = 20.685(3) A; beta = 112.576(7) degrees; V = 4880.8(12) A(3); Z = 4; R = 0.0441. Data for 2b: space group P(-)1; a = 10.130(3), b = 12.869(4), c = 17.038(5) A; alpha = 78.641(6), beta = 76.040(5), gamma = 81.210(6) degrees; V = 2100.3(11) A(3); Z = 2; R = 0.0493. Data for 3a: space group P(-)1; a = 10.0073(11), b = 10.5116(12), c = 19.874(2) A; alpha = 83.728(2), beta = 88.759(2), gamma = 65.756(2) degrees; V =1894.2(4) A(3); Z = 2; R = 0.0253. Data for 4a: space group P2(1)/c; a = 15.545(2), b = 18.110(2), c = 17.810(2) A; beta = 95.094(3) degrees; V = 4994.1(10) A(3); Z = 4; R = 0.0256. NMR data ((1)H, (31)P, (103)Rh, (119)Sn) are also reported.     

Octanuclear and nonanuclear supramolecular copper(II) complexes with linear "tritopic" ligands: structural and magnetic studies

The structures and magnetic properties of self-assembled copper(II) clusters and grids with the "tritopic" ligands 2poap (a), Cl2poap (b), m2poap (c), Cl2pomp (d), and 2pomp (e) are described [ligands derived by reaction of 4-R-2,6-pyridinedicarboxylic hydrazide (R = H, Cl, MeO) with 2-pyridinemethylimidate (a-c, respectively) or 2-acetylpyridine (d, R = Cl; e, R = H)]. Cl2poap and Cl2pomp self-assemble with Cu(NO(3))(2) to form octanuclear "pinwheel" cluster complexes [Cu(8)(Cl2poap-2H)(4)(NO(3))(8)].20H(2)O (1) and [Cu(8)(Cl2pomp-2H)(4)(NO(3))(8)].15H(2)O (2), built on a square [2 x 2] grid with four pendant copper arms, using "mild" reaction conditions. Similar reactions of Cl2pomp and 2pomp with Cu(ClO(4))(2) produce pinwheel clusters [Cu(8)(Cl2pomp-2H)(4)(H(2)O)(8)](ClO(4))(8).7H(2)O (3) and [Cu(8)(2pomp-2H)(4)(H(2)O)(8)](ClO(4))(8) (4), respectively. Heating a solution of 1 in MeOH/H(2)O produces a [3 x 3] nonanuclear square grid complex, [Cu(9)(Cl2poap-H)(3)(Cl2poap-2H)(3)](NO(3))(9).18H(2)O (5), which is also produced by direct reaction of the ligand and metal salt under similar conditions. Reaction of m2poap with Cu(NO(3))(2) produces only the [3 x 3] grid [Cu(9)(m2poap-H)(2)(m2poap-2H)(4)](NO(3))(8).17H(2)O (6) under similar conditions. Mixing the tritopic ligand 2poap with pyridine-2,6-dicarboxylic acid (picd) in the presence of Cu(NO(3))(2) produces a remarkable mixed ligand, nonanuclear grid complex [Cu(9)(2poap-H)(4)(picd-H)(3)(picd-2H)](NO(3))(9).9H(2)O (7), in which aromatic pi-stacking interactions are important in stabilizing the structure. Complexes 1-3 and 5-7 involve single oxygen atom (alkoxide) bridging connections between adjacent copper centers, while complex 4 has an unprecedented mixed micro-(N-N) and micro-O metal ion connectivity. Compound 1 (C(76)H(92)N(44)Cu(8)O(50)Cl(4)) crystallizes in the tetragonal system, space group I, with a = 21.645(1) A, c = 12.950(1) A, and Z = 2. Compound 2 (C(84)H(88)N(36)O(44)Cl(4)Cu(8)) crystallizes in the tetragonal system, space group I, with a = 21.2562(8) A, c = 12.7583(9) A, and Z = 2. Compound 4 (C(84)H(120)N(28)O(66)Cl(8)Cu(8)) crystallizes in the tetragonal system, space group I4(1)/a, with a = 20.7790(4) A, c = 32.561(1) A, and Z = 4. Compound 7(C(104)H(104)N(46)O(56)Cu(9)) crystallizes in the triclinic system, space group P, with a = 15.473(1) A, b = 19.869(2) A, c = 23.083(2) A, alpha = 88.890(2) degrees, beta = 81.511(2) degrees, gamma = 68.607(1) degrees, and Z = 2. All complexes exhibit dominant intramolecular ferromagnetic exchange coupling, resulting from an orthogonal bridging arrangement within each polynuclear structure.     

Analytical methods used to measure acrylamide concentrations in foods

The state-of-the-art of analysis for acrylamide in food is reviewed. The majority of analytical methods adopts a similar approach: addition of internal standard to the specimen, extraction with water, purification of extract using a solid-phase extraction cartridge, and then determination using either gas chromatography coupled to mass spectroscopy (GC/MS) after bromination, or direct measurement with liquid chromatography coupled to mass spectroscopy (LC/MS). The available methods generally show good agreement and are likely to be accurate. However, improvements in precision (within-laboratory) and repeatability (between-laboratory) are needed by particular data users.     

Trapped interfacial redox introduces reversibility in the oxygen reduction reaction in a non-aqueous Ca2+ electrolyte

Electrochemical investigations of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have been conducted in a Ca²⁺-containing dimethyl sulfoxide electrolyte. While the ORR appears irreversible, the introduction of a tetrabutylammonium perchlorate (TBAClO₄) co-salt in excess concentrations results in the gradual appearance of a quasi-reversible OER process. Combining the results of systematic cyclic voltammetry investigations, the degree of reversibility depends on the ion pair competition between Ca²⁺ and TBA⁺ cations to interact with generated superoxide (O₂⁻). When TBA⁺ is in larger concentrations, and large reductive overpotentials are applied, a quasi-reversible OER peak emerges with repeated cycling (characteristic of formulations without Ca²⁺ cations). In situ Raman microscopy and rotating ring-disc electrode (RRDE) experiments revealed more about the nature of species formed at the electrode surface and indicated the progressive evolution of a charge storage mechanism based upon trapped interfacial redox. The first electrochemical step involves generation of O₂⁻, followed primarily by partial passivation of the surface by Ca_xO_y product formation (the dominant initial reaction). Once this product matrix develops, the subsequent formation of TBA⁺--O₂⁻ is contained within the Ca_xO_y product interlayer at the electrode surface and, consequently, undergoes a facile oxidation reaction to regenerate O₂.

An interlayer product of oxygen reduction with Ca²⁺/TBA⁺ yields a quasi-reversible oxygen evolution reaction by inducing a trapped interfacial redox process.     

Rhodium-103 NMR of [Rh(X)(PPh3)3] [X = Cl, N3, NCO, NCS, N(CN)2, NCBPh3, CNBPh3, CN] and derivatives containing CO, isocyanide, pyridine, H2 and O2. Ligand, solvent and temperature effects

Rhodium-103 chemical shifts are reported for 62 compounds, namely [Rh(X)(PPh3)3] [X = Cl, N3, NCO, NCS, N(CN)2, NCBPh3, CNBPh3, CN] and derivatives formed by replacement of a phosphine by CO, xylyl isocyanide (XNC) and pyridine and/or by oxidative addition of H2 or O2 to give trans-[Rh(X)(PPh3)2(CO)] (delta in the range -816 to -368 ppm) trans-[Rh(X)(PPh3)2(XNC)] (delta -817 to -250 ppm), cis-[Rh(X)(PPh3)2(py)] (the trans isomer is formed with X = CN, CNBPh3) (delta -233 to 170 ppm), [Rh(X)(H)2(PPh3)3] (delta -611 to 119), trans-[Rh(X)(H)2(PPh3)2(py)] (delta -30 to 566 ppm), [Rh(X)(O2)(PPh3)3] (delta 1393 to 3273 ppm) and cis-[Rh(X)(O2)(PPh3)2(py)] (delta 1949 to 3374 ppm). For the majority of these compounds data were obtained from solutions in chloroform and in toluene at temperatures of 247 and 300 K; for [Rh(X)(PPh3)3] (delta -562 to -4 ppm) data are reported at a number of temperatures in the range 195-300 K for solutions in chloroform, toluene and dichloromethane and at 300 K for solutions in DMSO. The expected trend to lower delta(103Rh) with decreasing temperature (vibrational shielding) is observed for the dichloromethane data, but data from solutions {of [Rh(X)(PPh3)3]} in chloroform and toluene show a number of features which diverge from this pattern, i.e. shifts to higher delta are found to accompany a decrease in temperature, most noticeably where X = CN and Cl [on changing the solvent from dichloromethane to chloroform changes in delta(103Rh) of up to 172 ppm are observed]. These results are interpreted in terms of a hydrogen-bonded interaction with the solvent that is enhanced by the presence of a polarizable ligand (CN, Cl). With a ligand (O2CCF3) that is only weakly polarizable the solvent dependence of delta(103Rh) is minimal.     

Coordination Compounds of Schiff-Base Ligands Derived from Diaminomaleonitrile (DMN): Mononuclear, Dinuclear, and Macrocyclic Derivatives

Copper(II) and V(IV)O complexes of an open chain (1:2) Schiff-base ligand (H(2)L1), derived by the template condensation of diaminomaleonitrile (DMN) and salicylaldehyde, and dicopper(II) complexes of (2:2) macrocyclic Schiff-base ligands derived by template condensation of diformylphenols and diaminomaleonitrile, have been synthesized and studied. Structures have been established for the first time for mononuclear Cu(II) and V(IV)O derivatives of the open chain ligand H(2)L1 (1:2), a dinuclear macrocyclic Cu(II) complex derived from a 2:2 macrocyclic ligand (H(2)M1), and the half-condensed 1:1 salicylaldehyde ligand (H(2)L2). [Cu(L1)] (1) (L1 = C(18)H(10)N(4)O(2)) crystallized in the monoclinic system, space group P2(1)/n (No. 14), with a = 11.753(6) ?, b = 7.708(5) ?, c = 16.820(1) ?, and Z = 4. [VO(L1)(DMSO] (2) crystallized in the orthorhombic system, space group Pbca (No. 61), with a = 22.534(9) ?, b = 23.31(1) ?, c = 7.694(5) ?, and Z = 8. H(2)L2 (C(18)H(8)N(4)O) (3) crystallized in the monoclinic system, space group P2(1)/c (No. 14), with a = 13.004(6) ?, b = 11.441(7) ?, c = 7.030(4) ?, and Z = 4. [Cu(2)(M3)](CH(3)COCH(3)) (4) (M3 = C(32)H(24)N(8)O(4)) crystallized in the monoclinic system, space group C2/c (No. 15), with a = 38.33(2) ?, b = 8.059(4) ?, c = 22.67(2) ?, and Z = 8. [Cu(L3)(DMSO)] (5) (L3 = C(20)H(14)N(2)O(4)) crystallized in the triclinic system, space group P&onemacr; (No. 2), with a = 10.236(4) ?, b = 13.514(4) ?, c = 9.655(4) ?, and Z = 2. 4 results from the unique addition of two acetone molecules to two imine sites in [Cu(2)(M1)](ClO(4))(2) (M1 = 2:2 macrocyclic ligand derived from template condensation of DMN and 2,6-diformyl-4-methylphenol). 4 has extremely small Cu-OPh-Cu bridge angles (92.0, 92.8 degrees ), well below the expected lower limit for antiferromagnetic behavior, but is still antiferromagnetically coupled (-2J = 25.2 cm(-)(1)). This behavior is associated with a possible antiferromagnetic exchange term that involves the conjugated framework of the macrocyclic ligand itself. The ligand L3 in 5 results from hydrolysis of M1 on recrystallization of [Cu(2)(M1)](ClO(4))(2) from undried dimethyl sulfoxide.     

The direct synthesis of the cyclic sulphamidate of (S)-prolinol: SimultaneousN-protection and activation towards nucleophilic displacement of oxygen.

The preparation of the cyclic sulphamidate of (S)-prolinol has been achieved by reaction with sulphuryl chloride at low temperature. This material has been shown to be susceptible to acid catalysed nucleophilic attack to furnish 2-(NN-dialkylamino)methyl- and 2-(methoxymethy]pyrrolidines after hydrolysis of the intermediate sulphamic acid derivatives.