烷基硫酸盐表面张力的量子化学研究

用AMl量子化学计算法优化了十三烷基硫酸根阴离子和——CH3在不同取代位的十二烷基硫酸根阴离子的几何构型，得到最优构型时最高占据分子轨道能级EHOMO、最低空轨道能级ELUMO、电子能量Eele和偶极矩μ等数据．将这些电子结构数据分别与表面张力相拟合，得到很好的相关性。文中讨论了——CH3在不同位置取代对表面张力的影响。     

量子算法的NMR实现方法

量子计算机是一种以量子耦合方式进行信息处理的装置[1 ] 。原则上 ,它能利用量子相干干涉方法以比传统计算机更快的速度进行诸如大数的因式分解、未排序数据库中的数据搜索等工作[2 ] 。建造大型量子计算机的主要困难是噪音、去耦和制造工艺。一方面 ,虽然离子陷阱和光学腔实验方法大有希望 ,但这些方法都还没有成功实现过量子计算。另一方面 ,因为隔离于自然环境 ,核自旋可以成为很好的“量子比特” ,可能以非传统方式使用核磁共振 (NMR)技术实现量子计算。本文介绍一种用NMR方法实现量子计算的方法 ,该方法能够用比传统方法少的步骤解决一个纯数学问题。基于该方法的简单量子计算机使用比传统计算机使用更少的函数“调用”判断一未知函数的类别。     

Three-Step Predictor-Corrector of Exponential Fitting Method for Nonlinear Schroedinger Equations

We develop the three-step explicit and implicit schemes of exponential fitting methods. We use the three- step explicit exponential fitting scheme to predict an approximation, then use the three-step implicit exponential fitting scheme to correct this prediction. This combination is called the three-step predictor-corrector of exponential fitting method. The three-step predictor-corrector of exponential fitting method is applied to numerically compute the coupled nonlinear Schroedinger equation and the nonlinear Schroedinger equation with varying coefficients. The numerical results show that the scheme is highly accurate.     

线性泛函方程解的振动性的新结果

本文研究高阶泛函方程x(g(t))=P(t)x(t)+Q1(t)x(g2(t))+…+Qk(t)x(gk+1(t))解的振动性,得到了一些新的振动条件.改进和推广了已有结果.     

Synthesis and Crystal Structure of a Novel Organic Adduct Nonlinear Optical Material: 3,5-Dinitrobenzonic Acid·ethanolamine (3,5-DNBEA)

The title compound (C2H7NO·C7H4N2O6) has been obtained by the reaction of etha- nolamine with 3,5-dinitrobenzoic acid in deionized water at room temperature. The crystal crystal- lizes in orthorhombic, space group P212121 with a = 6.048(2), b = 9.146(3), c = 21.955(7)(A), C9H11N3O7, Mr = 273.21, Z = 4, V = 1214.3(7)(A)3, Dc = 1.494 g/cm3, F(000) = 568, μ(MoKα) = 0.131 mm-1, R1 = 0.0338 and wR2 = 0.0497. The new organic adduct is composed of one ethanolamine and one 3,5-dinitrobenzoic acid, which are linked up by O-H…O and N-H…O types of hydrogen bonds to form a nine-membered ring and an eleven-membered ring, extending into a one-dimensional network structure.     

高功率LDA紧密侧面抽运Nd:YLF两级双程离轴放大系统实验研究

 介绍了一台10mm口径两级双程离轴放大系统，实现了对5mm×5mm口径光束的激光放大，耦合系统采用高功率LDA紧密侧面直接抽运棒状Nd:YLF方式。分析并实验研究了在不同抽运电流、放大脉冲与放大器LDA抽运时刻的不同延时及不同注入能量条件下，放大系统及光束每次放大时放大特性的规律。实验得到：在放大系统5mm×5mm软光阑处注入1.58mJ能量时，放大系统可输出129.2mJ能量，能量提取效率达到19.5%，满足该系统的设计指标。     

稀土粉末Eu∶Y_2O_3的自由感应衰减量子拍

稀土固体是重要的激光和光电子材料。目前 ,由于以宽带信号和太赫兹比特数据传输率为特征的信息技术的发展 ,稀土固体材料的相干瞬态动力学过程成为宽带与高速信息光子学的基本物理问题之一。研究了室温下稀土粉末样品Eu3+ ∶Y2 O3自由感应衰减的相干瞬态光谱 ,这有助于理解有效的光吸收动力学、激发态弛豫、相干能量传递和超短光脉冲在稀土固体中的传播。用一对紫外飞秒相干光脉冲作用于稀土粉末样品Eu3+ ∶Y2 O3,然后监测物质激发态的布居数随两个激发脉冲之间的延时的变化 ,测量到其自由感应衰减量子拍 (FID) ,从拍频周期分析确定了其能级精细结构 ,能级的退相时间长达皮秒量级。理论分析和实验结果符合得很好。对稀土离子的量子干涉的研究 ,表明其在受激受控光放大方面具有潜在的应用前景     

双阳极磁控注入枪束流特性的研究

 介绍了用于34GHz基波回旋速调管的双阳极磁控注入枪的结构特点，为了准确分析磁控注入枪的束流特性，建立了阴极表面理论模型，用新编制的程序模拟了电子轨迹。模拟和测量结果显示磁场对磁控注入枪的束流有影响，磁控注入枪的束流也与阴极温度和空间电荷效应有关系。     

硅光电二极管激光损伤阈值随激光脉宽的变化

 对飞秒激光辐照下硅光电二极管损伤阈值进行了实验测量，对从1s到60fs不同脉宽激光辐照下硅光电二极管损伤阈值进行了讨论。实验数据表明，在1s到10ns脉宽范围内损伤所需能量密度近似而非严格地与脉宽的平方根成正比。信号分析表明硅光电二极管的损伤主要由热效应造成，而60fs激光辐照下的损伤阈值为0.1J/cm2，明显偏离普通温度分布预言的趋势。     

Synthesis of Cationic PEM Emulsion and Application in Waste Water Treatment

Cationic polymer as a kind of flocculant is widely applied in purification treatment of waste water. Because it has positive charge group, it is able to connect strongly the suspended matters, short cellulose and other microparticles. The research on synthesis of cationic polymer and application in treatment of waste water is very universal abroad. But domestic research on those is not general. The technology of synthesis of PEM is simple, and the production cost is low. It is easy to apply in treatment of waste water.Synthesis of PEM Emulsion FlocculantSome distilled water, PVA(poly(vinyl alcohol)), EA(ethyl acrylate), and K2S2O8(potassium persulfate) were put into reaction vessel. Kept stirring up under nitrogen. When heated the solution to 40℃, dropped the water solution of MTA[(2-methacryloxylethyl)trimethyl ammonium].Maintained the temperature at 70℃, reacted about 7-8 hours. Then got the PEM emulsion. Changed the ratio of EA and MTA. Obtained a series of PEM emulsions.Stability and Convertibility of PEM EmulsionThe test results showed that when the EA/MTA was 85/15, the PEM emulsion was most stable.When the total monomer quantity was 35%, the convertibility of PEM emulsion was the highest,i.e.98.6%.The MTA Copolymerization Ratio and Morphology of PEM EmulsionWhen the monomers EA/MTA=85/15 and total monomer quantity was 35%, the MTA copolymerization ratio of PEM emulsion was 95.15%(the highest), and the PEM emulsion was some microspheres with 100-180nm of diameter.The Test Results of PEM Emulsion in Treatment of Waste Water The PEM emulsion flocculant was applied in treatment of waste water of paper mill, and measured the precipitation time(t) and transmittancy(T). The test results were showed in table 1. The optimum value of PEM which was able to make the waste water of paper mill into clear water was 0.008%.