AuCl(3)-catalyzed benzannulation: synthesis of naphthyl ketone derivatives from o-alkynylbenzaldehydes with alkynes

The reaction of o-alkynylbenzaldehydes 1 and alkynes 2 in the presence of a catalytic amount of AuCl3 in (CH2Cl)2 at 80 degrees C gave naphthyl ketone products in high yields. The AuCl3-catalyzed formal [4 + 2] benzannulation proceeds most probably through the coordination of the triple bond of 1 to AuCl3, the formation of benzo[c]pyrylium auric ate complex via the nucleophilic addition of the carbonyl oxygen atom, the Diels-Alder addition of alkynes 2 to the auric ate complex, and subsequent bond rearrangement. Similarly, the AuCl3-catalyzed reactions of o-alkynylacetophenone and o-alkynylbenzophenone with phenylacetylene afforded the corresponding naphthyl ketone products in good yields.     

Synthesis of 2-, 4- and 5-(2-alkylcarbamoyl-1-methylvinyl)-7-alkyloxybenzo[b]furans and their leukotriene B4 receptor antagonistic activity

Variable benzo[b]furan derivatives having (E)- and (Z)-2-alkylcarbamoyl-1-methylvinyl groups at the 2-, 4- and 5-positions and a carboxylpropoxy or (1-phenyl)ethoxy group at the 7-position were prepared to find novel and selective leukotriene B4(LTB4) receptor antagonists. (E)-2-(2-diethylcarbamoyl-1-methylvinyl)-7-(1-phenylethoxy)benzo[b]furan (4v) showed selective inhibition to the human BLT2 receptor (hBLT2). On the other hand, (E)-2-acetyl-4-(2-diethylcarbamoyl-1-methylvinyl)-7-(1-phenylethoxy)benzo[b]furan (7v) inhibited both human BLT(1) receptor (hBLT1) and hBLT2. The (E)-2-(2-diethylcarbamoyl-1-methylvinyl) group lay on approximately the same plane as the benzo[b]furan ring, whereas the (E)-4-(2-diethylcarbamoyl-1-methylvinyl) group had the torsion angle (45.7 degree) from the benzo[b]furan ring plane. However, the (Z)-(2-alkylcarbamoyl-1-methylvinyl)benzo[b]furans were inactive. The inhibitory activity depended on the conformation of the 2-diethylcarbamoyl-1-methylvinyl group.     

Incorporating tritiated water into a 14C-sampling system for quantitative estimation of 14C activity in airborne effluent

The effects of incorporating tritiated water into a ¹⁴C-sampling system in sample preparation and ¹⁴C activity measurement by liquid scintillation counting were investigated. Experiments derived the limit of water content in the prepared sample, and also demonstrated that ¹⁴C activity can be determined without any interference from ³H contamination for a clear-sample solution. The results enabled us to estimate the permissible relative humidity of air required for accomplishing sample preparation and ¹⁴C activity measurement. These showed that for sampling of air with less than the permissible relative humidity, total ¹⁴C activity in airborne effluent can be evaluated accurately without dehumidification of air.The authors would like to thank T. Kozawa, K. Isaka and Y. Adachi of Inspection Development Company Ltd., Y. Hiyama of Zuihou Sangyou Company Ltd., and T. Mizutani, H. Watanabe, M. Takeishi and K. Shinohara of Japan Nuclear Cycle Development Institute for their valuable assistance.     

Kinetics of γ-ray polymerization of formaldehyde in the presence of carbon dioxide

A kinetic study of the γ-ray polymerization of formaldehyde in toluene solution in the presence of carbon dioxide was carried out at temperatures of + 13 to ?17°C. Two modes of the polymerization, spontaneous and γ-ray polymerization, occur in this system. The γ-ray polymerization, experimentally separated from the spontaneous polymerization, was investigated. The rate of γ-ray polymerization increased slightly with the square root of carbon dioxide concentration. The rate of polymerization was also found to be proportional to the dose rate and the square of monomer concentration. The molecular weight of polymer formed was independent of the reaction condition. The apparent activation energy was estimated to be 10.3 kcal./mole. The kinetics of the γ-ray polymerization in the presence of carbon dioxide are explained quantitatively by a cationic mechanism, and the role of carbon dioxide is as an action of retardation for neutralization of the cationic initiating species, which was produced by γ-radiation, by means of a reverse reaction with an electron. Physical and mechanical properties of the polymer obtained by γ-ray polymerization were also investigated.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part I

A cationic polymerization of formaldehyde which gave a high molecular weight polymer was studied in liquid carbon dioxide at 20–50°C. In the polymerization without any catalyst both the rate of polymerization and the molecular weight of the resulting polymer increased rapidly with a decrease in the loading density of the monomer solution to the reaction vessel, and also increased with an increase in the initial monomer concentration. From these results it was concluded that the initiating species could be ascribed to an impurity contained in the monomer solution. Both the rate of polymerization and the degree of polymerization of the polymer also increased with rising temperature. The carboxylic acid added acted as a catalyst in the polymerization because of increase in the polymer yield, the molecular weight of polymer formed, and the number of moles of polymer chain with increasing dissociation constant of acid used. It was concluded that the polymerization in liquid carbon dioxide proceeded by a cationic mechanism. Methyl formate had no influence on the polymerization, but methanol and water acted as a chain-transfer agent.     

Chemical compositional separation of styrene-methyl methacrylate copolymers using high-performance liquid chromatography with liquefied carbon dioxide as eluent

Chromatographic separation of styrene-methyl methacrylate (MMA) copolymers depending on the chemical composition was studied using liquefied carbon dioxide as an adsorption promoting solvent, and tetrahydrofuran, chloroform containing ethanol as a desorption promoting solvent in the mobile phase and the column packed non-bonded silica gel by a solvent gradient method. With the increase of MMA content, the elution was retarded indicating that the typical normal-phase type of adsorption occurred. The effects of type of desorption solvents, molecular mass of sample, and column temperature on the elution were investigated.     

Synthesis of a novel potential tridentate anthracene ligand, 1,8-bis(dimethylamino)-9-bromoanthracene,and its application as chelate ligand for synthesis of the corresponding boron and palladium compounds

A novel potential tridentate ligand, 1,8-bis(dimethylamino)-9-bromoanthracene, was synthesized. The key steps are as follows: 1) dimethylamination of 1,8-dibromo-9-methoxyanthracene by a modified Buchwald's method to afford 1,8-bis(dimethylamino)-9-methoxyanthracene, and 2) reduction of the methoxy group by LDBB (lithium di-tert-butylbiphenylide) followed by treatment with BrCF2CF2Br. The corresponding 1,8-bis(dimethylamino)-9-lithioanthracene, which should be a useful versatile tridentate ligand, could be generated by treatment of the bromide with one equivalent of nBuLi. The lithioanthracene reacted with B-chloroborane derivatives to give three 9-boryl derivatives. Although we recently reported that the crystal structure of 1,8-dimethoxy-9-B-catecholateborylanthracene was a symmetrical compound with the almost identical two O-B distances (2.379(2) and 2.441(2) A), the newly prepared 1,8-bis(dimethylamino)-9-borylanthracene derivatives clearly have unsymmetrical structures with coordination of only one NMe2 group toward the central boron atom. However, the energy difference between the unsymmetrical and symmeterical structures was found to be very small based on 1H NMR measurements, in which symmetrical anthracene patterns in the aromatic region (two kinds of doublets and a triplet) and a sharp singlet signal of the two NMe2 groups were observed even at -80 degrees C. 1,8-Bis(dimethylamino)-9-bromoanthracene itself can be a versatile ligand for transition metal compounds. In fact, direct palladation of the bromide took place by the reaction with [Pd2(dba)3].CHCl3 in THF to give the 9-palladated product. X-ray crystallographic analysis of the Pd compound showed that the square planar palladium atom was coordinated in a symmetrical fashion by both NMe2 groups (Pd-N bonds are 2.138(5) and 2.146(5) A).     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002