Remarkably enhanced capacitance of ordered polyaniline nanowires tailored by stepwise electrochemical deposition

A stepwise deposition method was employed to create ordered polyaniline (PANI) nanowires with remarkably enhanced capacitance. Cyclic voltammetry, AC impedance, and galvanostatic charge/discharge cycling were employed to investigate the electrochemical performance of the PANI electrodes. The PANI-deposited electrode exhibits much higher capacitance than those prepared by one-step deposition method, which were mainly contributed from the unique nano structure of PANI and the increased biological, economical, and technical surface areas. The superior capacitive behaviors of the nano PANI electrodes show great potential in preparation of high efficient electrochemical capacitors or rechargeable batteries.     

Simultaneous Determination of Four Flavonoids in Pigeonpea [Cajanus cajan (L.) Millsp.] Leaves Using RP-LC-DAD

A simple and accurate RP-HPLC method using photodiode array detection (PAD) was developed for the simultaneous determination of four flavonoids, namely quercetin (QU),luteolin(LU),apigenin(AP) and isorhamnetin (IS) in pigeonpea leaves.Extract samples were separated on HIQ SIL C₁₈V column using methanol-acetonitrile-water(31:10:59, v/v/v) as mobile phase.The flavonoids were detected at 254.5 nm for QU and IS, and at 345 nm for LU and AP.Contents were determined with satisfactory repeatability (R. S. D. < 2.2%) and recovery (97.27 – 99.98%). The developed method was found to be simple and efficient.     

Time‐Resolved Synchrotron Radiation Excited Optical Luminescence: Light‐Emission Properties of Silicon‐Based Nanostructures

The recent advances in the study of light emission from matter induced by synchrotron radiation: X‐ray excited optical luminescence (XEOL) in the energy domain and time‐resolved X‐ray excited optical luminescence (TRXEOL) are described. The development of these element (absorption edge) selective, synchrotron X‐ray photons in, optical photons out techniques with time gating coincide with advances in third‐generation, insertion device based, synchrotron light sources. Electron bunches circulating in a storage ring emit very bright, widely energy tunable, short light pulses (<100 ps), which are used as the excitation source for investigation of light‐emitting materials. Luminescence from silicon nanostructures (porous silicon, silicon nanowires, and Si–CdSe heterostructures) is used to illustrate the applicability of these techniques and their great potential in future applications.     

CO(υ)高振动激发态向C2H2的振动传能研究

用时间分辨富里叶红外发射谱研究了高振动激发态ＣＯ向Ｃ２Ｈ２的传能，得到了ＣＯ（ｖ＝１－３）各振动态布居及其随时间的变化。利用微分法解出弛豫微分方程组，获得ＣＯ（ｖ＝１－３）向Ｃ２Ｈ２的传能速率常数分别为：２．０±０．１，６．０±０．２和９．４±０．８（１０＾－１３ｃｍ＾３·ｍｏｌｅｃｕｌｅ＾－１·ｓ＾－１）。传能速率随着振动量子数的增加而迅速增加。ＣＯ的振动能应向Ｃ２Ｈ２的对称伸缩模ｖ２近共振Ｖ－     

Two-color resonantly enhanced multiphoton ionization and zero-kinetic-energy photoelectron spectroscopy of jet-cooled indan

We report studies of supersonically cooled indan using two-color resonantly enhanced multiphoton ionization and two-color zero-kinetic-energy photoelectron spectroscopy. With the aid of ab initio and density-functional calculations, vibrational modes of the first electronically excited state of the neutral species and those of the cation have been assigned, and the adiabatic ionization energy has been determined to be 68458 +/- 5 cm(-1). Similar to the ground state and the first electronically excited state of the neutral molecule, the ground state of the cation is also proven to be nonplanar, with an estimated barrier of 213 cm(-1) and a puckering angle of 15.0 degrees. These conclusions will be discussed in comparison with a previous study of an indan derivative 1,3-benzodioxole.     

Direct synthesis, characterization of Cu-SBA-15 and its high catalytic activity in hydroxylation of phenol by H2O2

Transition metal copper substituted mesoporous silica (Cu-SBA-15) was synthesized using triblock copolymers surfactant as template agent under acidic condition. The result Cu-SBA-15 was characterized with XRD, ICP-AES, FT-IR and N₂ adsorption–desorption measurements, which prove that Cu(II) was mainly incorporated into the framework of Cu-SBA-15. Its catalytic activity was studied for phenol hydroxylation using H₂O₂ (30%). The substituting element (Cu²⁺) is incorporated into the framework position forming a new type of active site which raises the phenol conversion to 62.4% and the diphenol (the mixture of catechol (CAT) and hydroquinone (HQ)) selectivity to 97%. The Cu-SBA-15 has very high selectivity for catechol (about 71% selectivity), which is completely different from that of the microporous titanium silicalite zeolites (47.1% phenol conversion and about 50% selectivity to CAT under same reaction conditions). The results obtained indicate that the selective oxidation of phenol with H₂O₂ by a radical substitution mechanism.     

Effects of cell-wall acetate,xylan backbone,and lignin on enzymatic hydrolysis of aspen wood

Aspen wood substrates with varying degrees of deacetylation, xylan, and lignin removal have been prepared and submitted to enzymatic hydrolysis with a cellulase/hemicellulase preparation for an extended constant period of hydrolysis. Controlled deacetylation has been achieved by treating wood with various alkali metal hydroxide solutions, at various alkali/wood ratios. It has been found that samples with the same extent of deacetylation produce the same sugar yields upon enzymatic hydrolysis. Increased degree of deacetylation increases the yield of sugars obtained from enzymatic hydrolysis, all other compositional parameters held constant. The acetyl group removal is proportional to the stoichiometric relation between added base and wood acetyl content, i.e., the same number of milliequivalents of base/weight of wood remove the same extent of acetyl groups, regardless of the concentration of the base solution. No cation effects are found among Li, Na, and K alkali hydroxide solutions, suggesting that swelling is not as important a parameter as is the removal of the acetyl groups from the xylan backbone in determining the extent of hydrolyzability of the resulting sample.     

Capillary electrochromatographic separation of enantiomers under aqueous mobile phases on a covalently bonded cellulose derivative chiral stationary phase

A chemically bonded cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase (CSP) was prepared by a radical polymerization reaction. The prepared CSP was packed into fused-silica capillaries with inner diameter of 75 microm to perform enantiomer separations in CEC. The electrochromatographic behavior of the CSP was investigated. On the prepared CSP, high EOF could be generated under acidic mobile phases, which represented an advantage for the separation of acidic enantiomers. Several neutral, acidic, and basic enantiomers were resolved on the prepared CSP under aqueous mobile phases. The column efficiencies were between 20,000 and 100,000 plates/m, which were much higher than those of HPLC. In addition, it was observed that the separation of some enantiomers benefited from the adoption of THF as mobile phase modifier.     

Determination of trace rhodium by supramolecular catalytic kinetic spectrofluorimetry of β-CD-rhodium-KBrO3-vanillin salicylhydrazone

A sensitive catalytic kinetic spectrofluorimetric approach for determining ng mL⁻¹ levels of rhodium is presented, and the possible mechanism of the catalytic reaction was investigated. The determination is based on the catalytic property of rhodium to enhance the reaction of o-vanillin salicylhydrazone (OVSH) with potassium bromate in a water-ethanol medium at pH 4.80 and 45 °C. The presence of β-cyclodextrin (β-CD) obviously sensitized the assay due to its high inclusion ability towards OVSH. Under optimized experimental conditions, fluorescence measurements of the β-CD-rhodium-KBrO₃-OVSH catalytic kinetic reaction system were carried out in its fluorescent band centered at λ_ex = 333 nm and λ_em = 476 nm, respectively. The calibration graph was linear over the concentration range of 0.47–100 ng mL⁻¹ with a detection limit of 0.14 ng mL⁻¹. The effect of interferences was discussed, and the results show that the extraction method can be used to separate rhodium from interference species such as iridium. The proposed method, applied to several synthetic mixtures containing rhodium mixed with varying amounts of metal salts, produced satisfactory results.     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。