Alternating copolymerization of polar vinyl monomers in the presence of zinc chloride. I. Propagation and initiation of the copolymerization of acrylonitrile with styrene copolymer

Copolymerization of acrylonitrile with styrene spontaneously occurred on addition of zinc chloride without addition of any other radical initiator. The composition of the copolymer approached that of strictly alternating copolymer as zinc chloride added to the copolymerization system increased. The significance of the apparent monomer reactivity ratios of this copolymerization system was studied from a kinetic point of view, and it was shown that the monomer sequence distribution is indicated by the apparent monomer reactivity ratios. Further, equations which represent the relation between the apparent monomer reactivity ratios and Q,e values at a given salt concentration were derived. These equations reasonably accounted for the decrease of the apparent monomer reactivity ratios of the copolymerization of acrylonitrile with styrene in the presence of zinc chloride and the behavior of the other acrylonitrile copolymerization systems in the presence of zinc chloride. The initiation step of the spontaneous radical copolymerization of acrylonitrile with styrene in the presence of zinc chloride was explained by a cross-initiation mechanism.     

Studies directed towards the asymmetric total synthesis of antileukemic lignan lactones. Synthesis of optically pure key intermediate and its utility

By the self-immolative asymmetric synthesis, optically pure key intermediate β-piperonyl-γ-lactone (R)-(+)-$\text{6}$ was found to be prepared in reasonable yield from the easily available chiral γ-lactone synthon ($\text{1}$) which had been also reported to give an antipode (S)-(-)-$\text{6}$. The optically pure (R)-(+)-$\text{6}$ was shown to be converted successfully into several optically pure natural lignan lactones.     

Synthesis of new azonia-helicenes with a quaternary nitrogen at the inner helix skeleton

The 16c-azonia[6]helicene salts, in which a carbon atom at the inner helix skeleton of [6]helicene is replaced by a quaternary nitrogen atom, have been synthesized by photo-induced intramolecular quater-nization of 2-[2-(1-chloronaphthyl)vinyl]benzo[h]quinolines in acetonitrile.     

First asymmetric total synthesis of (+)-steganacin determination of absolute stereochemistry

(+)-Steganacin was synthesized in a new and highly specific asymmetric pathway based on the novel application of chiral γ-lactone as a chiral synthon. By this synthesis the absolute stereochemistry of natural (?)-steganacin could be determined in unequivocal way.     

Vacancy ion-exclusion chromatography of carboxylic acids on a weakly acidic cation-exchange resin

In this preliminary study, a new approach to ion-exclusion chromatography is proposed to overcome the relatively poor conductivity detection response which occurs in ion-exclusion chromatography when acids are added to the eluent in order to improve peak shape. This approach, termed vacancy ion-exclusion chromatography, requires the sample to be used as eluent and a sample of water to be injected onto a weakly acidic cation-exchange column (TSKgel OApak-A). Vacancy peaks for each of the analytes appear at the retention times of these analytes. Highly sensitive conductivity detection is possible and sharp, well-shaped peaks are produced, leading to efficient separations. Retention times were found to be affected by the concentration of the analytes in the eluent, and also by the presence of an organic modifier such as methanol in the eluent. Detection limits for oxalic, formic, acetic, propionic, butyric and valeric acids were 0.1, 0.2, 0.3, 0.3, 0.4 and 0.5 microM, respectively, and linear ranges for some acids extended over two orders of magnitude. Precision values for retention times were 0.21% and for peak areas were <1.90%. The vacancy ion-exclusion chromatography method was found to give detection responses four to 10 times higher than conventional ion-exclusion chromatography using sulfuric acid eluent and two to five times higher than conventional ion-exclusion chromatography using benzoic acid eluent.     

Adsorption properties of activated carbon from waste newspaper prepared by chemical and physical activation

Adsorption properties of activated carbons prepared from waste newspaper by chemical and physical activation were investigated using water vapor, ammonia, methane, and methylene blue (MB) as adsorbents. The water vapor adsorption isotherms show type V behavior and the maximum vapor adsorption of the chemically and physically activated products is about 1050 and 450 ml/g, respectively. The higher water vapor adsorption of the chemically activated products is attributed to the higher specific surface area (S(BET)) and greater hydrophilic activity (arising from the surface oxygen-containing functional groups) than in the physically activated products. The adsorption of ammonia and methane was measured by temperature-programmed desorption (TPD). NH(3) adsorption is found to be higher in the chemically activated product than in the physically activated product while methane adsorption is slightly higher in the physically activated products even though these have lower S(BET) values. In the MB adsorption, the chemically activated products show higher adsorption (390 mg/g) than the physically activated product. These results are suggested to be related to the surface characteristics.     

Reaction of poly(vinyl alcohol) with formaldehyde and polymer stereoregularity. Model compounds

The reaction of stereoisomers of pentane-2, 4-diol and heptane-2, 4, 6-triol with formaldehyde was investigated as a model for the formalization reaction of poly(vinyl alcohol) in order to determine effect of the stereochemical configuration of the polyol molecules on the reaction. The isotactic (meso) diol portion reacted with formaldehyde to give cis-formal several times faster than did the syndiotactic (dl) diol portion to give trans-formal at 30–80°C. In the reaction of heterotactic (meso-dl) triol which provides both the isotactic and syndiotactic diol portions in a molecule, the proportion of trans-formal in the total formal decreased as the reaction proceeded. This shows that the formation of cis-formal is also favored thermodynamically to a greater extent, and hence the intramolecular migration of trans-formal to cis-formal did occur during the reaction. The rates of hydrolysis of formals of the diols were compared with those of the triols in order to see the effect of a hydroxyl group adjacent to the formal ring on the reaction. No appreciable rate difference was observed between the dimer and trimer models both in cis- and trans- formals. Therefore it was deduced from these results that the increase of the rate of hydrolysis of poly(vinyl formal) with the increase of hydroxyl groups along the polymer chain is a characteristic of macromolecules that is not observed in the low molecular weight models.     

Determination of electrochemical kinetic parameters by square-wave polarography: Polarographic reduction of Zn(II) in 1 M KCl,KBr, and KNCS solutions

A new method of determining electrochemical kinetic parameters by square-wave polarography was presented, in which the faradaic current at θ/2, θ being the half-period of superimposed square-wave voltage, was used for the analysis. The method gave the following kinetic parameters for the electrode reaction, Zn(II) + 2e(Hg), in aqueous solutions at 25° C: k_c^θ=0.0052 cm s^?1 and α_c=0.36 in 1 M KCl, k_c^θ=0.011 cm s^?1 and α_c=0.30 in 1 M KBr, and k_c^θ=0.020 cm s^?1 and α_c=0.52 in 1 M KNCS. Induced adsorption of Zn(II) on the dropping mercury electrode was suggested in solutions containing thiocyanate ions.     

Chiral ligand-controlled asymmetric conjugate addition of lithium amides to enoates

The external chiral ligand-controlled asymmetric conjugate addition reaction of lithium amides with alpha,beta-unsaturated esters provided beta-amino esters in high yields and high enantioselectivities.     

Thermal and photochemical rearrangements of 1,4-dithiin sulfoxides

Thermolysis of 2,5-diphenyl-1,4-dithiin-1-oxide afforded 2-formyl-2,4-diphenyl-1,3-dithiole, which was obtained also in photolysis along with another rearranged product, 2-benzoyl-4-phenyl-1,3-dithiole.