Electronic structure and oxygen vacancies in PdO and ZnO: validation of DFT models

PdO is one of the most important catalytic materials currently used in the industry. In redox catalytic reactions involving PdO, the bulk phase is an additional source of oxygen. This leads to strong transformations not only at the surface of PdO but also in the near sub-surface and bulk regions. The redox process is, therefore, governed not only by the extent of PdO d-band filling, but also depends on the material properties of the PdO crystal--the ease with which its structure can be deformed. Methane oxidation is of key industrial interest, and therein the rate of CH(4) conversion depends strongly on the reversible oxygen defects formation on the surface and in the bulk of the catalyst. The present study gives a first insight into these complex phenomena at the atomistic level. Comparison of different density functional theory (DFT) approaches and their capacity to reproduce experimental values of the heat of formation as well as the band gap of the PdO are discussed in detail. Results from DFT calculations for an oxygen vacancy creation in the bulk and on the surface of PdO are presented and compared at the level of accuracy of the implemented approaches with defect calculations for ZnO. Many different modeling approaches based on functionals and pseudopotentials (non-modified PP and empirically tuned) have been evaluated in their aptness to capture key PdO properties. It was shown that simulations with the PP-115 pseudopotential gave the closest possible agreement to the relevant PdO thermodynamic data and energy of oxygen vacancy formation.     

Volumes,heat capacities,and compressibilities of the mixtures of acetonitrile and 2-methoxyethanol

Heat capacities and speed of sound of (acetonitrile + 2-methoxyethanol) mixtures at 298.15 K and the densities of the same mixtures at T = (308.15 and 318.15) K were determined over the whole composition range. The excess of molar volume and isobaric heat capacity of the mixture, the partial molar volumes and heat capacities of both components of the mixture as well as the adiabatic and isothermal coefficients of compressibility and their excess were calculated from the obtained experimental data. The internal pressure of the examined system was also calculated. The results of investigations were analyzed and discussed. The behavior of the analyzed functions is similar to that observed in the case of the mixtures of acetonitrile with some aprotic solvents examined earlier.     

Effectiveness of nitric oxide ozonation

Attempts to develop new technologies of NO _x (NO + NO₂) emission reduction are still carried out all around the world. One of the relatively new approaches is the application of ozone injection into the exhaust gas stream followed by the absorption process. Ozone is used to transform NO _x to higher nitrogen oxides which yield nitric acid with better effectiveness. The main objective of this paper was to study the influence of mole ratio (MR) O₃/NO used in the ozonation process of NO _x on the effectiveness of NO _x oxidation to higher oxides. The ozonation process was carried out in a flow reactor for concentrations of nitric oxide in the range of 1.5 × 10⁻⁵−7.7 × 10⁻⁵ mol dm⁻³ and varying O₃/NO mole ratios. Measurements were conducted with the use of a FTIR spectrometer. The results obtained prove that for MR higher than 1, the oxidation effectiveness of nitric oxides generally reaches 95 %, whereas for MR higher than 2, oxidation of NO _x to higher nitrogen oxides is completed.     

Amidophenol-modified amphiphilic calixarenes: synthesis, interfacial self-assembly, and acetaminophen crystal nucleation properties

Three amidophenol-modified calixarenes have been produced reacting the parent 5,11,17,23-tetracarboxy-25,26,27,28-tetradodecyloxycalix[4]arene with o-, m-, and p-aminophenol. The produced amphiphiles have been shown to form stable monomolecular Langmuir layers on water. Working on subphases containing 1 mM acetaminophen (APAP), it has been demonstrated that the produced amphiphiles interact with this active pharmaceutically ingredient (API) with a relevant preference for the para-derivative that possesses in its structure substituents that are analogous to the target. Working at supersaturating concentrations of APAP, it has been demonstrated that the so-produced calixarene Langmuir monolayers do favor crystallization of APAP (polymorph I), with a clear effect of the packing density of the amphiphile at the interface on the quantity of produced crystals. Monolayers of the para-derivative have been transferred on solid substrates using the Langmuir-Blodgett technique; the so-produced ultrathin films have been shown to initiate surface crystal nucleation of APAP. The produced solids have been analyzed by single-crystal X-ray crystallography and shown to preferentially grow in the [010] direction.     

Quantitative mapping of elastic moduli at the nanoscale in phase separated polyurethanes by AFM

The micro phase separated nanoscale morphology of phase separated polyurethanes (PUs) was visualized by atomic force microscopy (AFM) height and phase imaging of smooth surfaces obtained by ultramicrotonomy. PUs were obtained from 4,4′-methylenbis (phenyl isocyanate) (MDI), 1,4-butanediol (BD) and poly(tetrahydrofurane) polyether polyol (PTHF). The segmented polyether PUs with varying stoichiometric ratio of the isocyanate and hydroxyl groups were prepared to investigate the effect of molar mass, as well as the type and number of end-groups on their morphology and mechanical performance.The PU samples studied show characteristic “fingerprint” AFM phase images. Novel dynamic imaging modes of AFM, including HarmoniX material mapping and Peak Force Tapping were used to assess the mechanical performance of phase separated polyurethanes quantitatively as a function of their molecular structure. The values of surface elastic moduli were determined with nanoscale resolution and were in excellent agreement for both AFM modes. While tensile testing provides a bulk average value for the elastic modulus of the elastomers, the novel AFM based elastic moduli mappings introduced enable the study of surface stiffness with nanoscale resolution in a quantitative way.     

Comparison of phase structures and surface free energy values for the coatings synthesised from linear polyurethanes and from waterborne polyurethane cationomers

WAXS, DSC and AFM methods were employed to compare phase structures of the coatings obtained from waterborne polyurethane cationomers which had been synthesised in the reaction of some diisocyanates (MDI, IPDI, TDI and HDI) with polyoxyethylene glycols (M?=?600 and 2,000) and butane1,4-diol or N-methyl- or N-butyldiethanolamine and 2,2,3,3-tetrafluoro-1,4-butanediol. The structures were also analysed of the coatings derived from linear polyurethanes which had been synthesised on the basis of similar raw materials. Better rigidity was found for generally amorphous cationomer coats. Changes were discussed in the surface free energy (SFE) values and in their components, as calculated independently with the use of the van Oss-Good and Owens-Wendt methods. Polyurethane coats turned out more hydrophobic as compared to cationomer ones. In both coat types, fluorine incorporated into cationomers contributed to lower SFE values: from 50 down to about 30?mJ/m(2).     

Continua of interactions between pairs of atoms in molecular crystals

The electron density distributions in crystals of five previously studied DMAN complexes and five Schiff bases (two new ones) have been analysed in terms of various properties of bond critical points (BCPs) found in the pair-wise interactions in their lattices. We analysed the continua of interactions including covalent/ionic bonds as well as hydrogen bonds and all other types of weak interactions for all pairs of interacting atoms. The charge density at BCPs and local kinetic and potential energy densities vary exponentially with internuclear distance (or other measures of separation). The parameters of the dependences appear to be characteristics of particular pairs of atom types. The Laplacian and the total (sum of kinetic and potential) energy density at BCPs show similar behaviour with the dependence being of the Morse type. The components lambda1, lambda2, lambda3 of the Laplacian at BCPs vary systematically with internuclear distance according to the type of atom pair. For lambda1 and lambda2 the distribution is of the exponential type, whereas lambda3 does not seem to follow any simple functional form, consistent with previous theoretical findings. Analytical nonlinear dependences of Laplacian on charge density have been found. They agree reasonably well with those obtained by least square fit of the Laplacian to charge density data. There are four distinct regions of the [symbol: see text]2rho(BCP)/rho(BCP) space, generated by E(BCP) = 0 and G(BCP)/rho(BCP) = 1 conditions. Two regions clearly correspond to the shared-shell and closed-shell interactions and the other two to some intermediate situation.     

Electroanalysis of the Anthelmintic Drug Bithionol at Edge Plane Pyrolytic Graphite Electrode

An electrochemical study of the anthelmintic drug bithionol using edge plane pyrolytic graphite electrode (EPPGE) is presented for the first time by applying different electrochemical techniques, such as cyclic voltammetry (CV), square‐wave voltammetry (SWV), square‐wave adsorptive stripping voltammetry (SWAdSV), and alternating current (AC) impedance spectroscopy. Mechanistic aspects of the electrode reaction were studied implying a quasireversible electrode reaction from an adsorbed state of the reactant, coupled with a follow‐up chemical reaction to a final electroinactive product. The overall mechanism appears totally irreversible under conditions of CV at moderate scan rate, while being quasireversible under conditions of the fast SWV. Furthermore, an optimisation of the analytical procedure for quantitative determination of bithionol was conducted by applying SWV in an adsorptive stripping mode. The calibration curve was constructed in the concentration range of 0.1–1.0 μmol L^?1 (R²=0.9984) with a sensitivity of 3.6 μA L μmol^?1 and LOD of 26.7 nmol L^?1. The simple and sensitive SWAdSV procedure was proved to be suitable for the analysis of spiked urine samples.     

Synthesis of type II beta-turn surrogate dipeptides based on syn-alpha-amino-alpha,beta-dialkyl-beta-lactams

The achiral bis(trimethylsilyl)methyl group acts as an efficient stereochemical determinant of the alpha-alkylation reaction in beta-branched alpha-phenyloxazolidinyl- or alpha-diphenyloxazolidinyl-beta-lactams and provides the first stereocontrolled access to syn-alpha-amino-alpha,beta-dialkyl(aryl)-beta-lactams. These products are readily transformed into type II beta-turn mimetic surrogates 2B. [reaction: see text]