Three-stage sequential extraction procedure for metal partitioning in polluted soils and sediments

The sequential extraction procedure proposed by the Standard, Measurements and Testing program "SM&T" of the European Union has been applied to evaluate the amounts of Cr, Cu, Mn, Ni, Pb and Zn, extracted at each stage and indirectly their mobility and bioavailability in soil and sediment samples from a polluted area. Analysis of the extracts was carried out by flame atomic absorption spectrometry (FAAS). No significant matrix interferences were found except for Cr in the acetic acid and hydroxylammonium chloride extracts, which required determination by the standard additions method. Both of soils and sediments studied show similar partitioning of Mn, Ni, Cu and Cr. Mn and Ni can be considered to have significant component bound to the acido-soluble fraction, whereas, Cr and Cu occur largely in the organic and residual phases. The partitioning of Pb and Zn was different between soil and sediment. In terms of mobility and bioavailability, in soils, Ni and Mn can be regarded as moderately available followed by a lower availability of Pb while Cu, Zn and Cr have a very limited availability. In sediments, a higher availability (short-medium term) of Mn and Zn was presumed followed by a lower availability of Ni and Pb, whereas, Cu and Cr, occurring largely in the organic and residual phases, were of very limited availability.     

Electrochemically Induced Iron Release of Adsorbed Horse Spleen Ferritin: Quantitation of Iron Using Long Optical Path Length Thin‐Layer Spectroelectrochemistry

In this work, long optical path length thin‐layer electrochemical cell was constructed using indium‐tin oxide on glass as the electrode material. Iron release from ferritin adsorbed on the electrode was induced by applying a negative potential sweep in the presence of 1,10‐phenanthroline. The usefulness of spectroelectrochemistry as a means of determining the quantity of iron released from an adsorbed layer of ferritin is demonstrated.     

Correlation between Solution and the Solid State: The pH Dependent Composition in the Ternary System [Co(H2O)6]2+ or [Ni(H2O)6]2+/Piperazine/Phosphate

The protolytic equilibria of piperazine (C₄H₁₀N₂) and phosphate have been investigated in the presence of cobalt or nickel chloride or nitrate by potentiometric titrations between pH 2 and 8. Potentiometric titrations suggest the presence of [M²⁺(H₂O)₅(C₄H₁₁N₂⁺)]³⁺ and [M²⁺(H₂O)₅(C₄H₁₀N₂)]²⁺ in solution with stability constants logK of 3.1 and 3.8 for M = Co and 3.1 and 3.6 for M = Ni, respectively. Crystallization experiments were then conducted at selected pH values to isolate desired species from the known solution composition. Crystallization afforded [M(H₂O)₆]²⁺(C₄H₁₂N₂²⁺)(HPO₄^2—)₂ at pH 3.5 and 6.2 (M = Co, Ni), and Co₃(PO₄)₂·8H₂O at pH 10.5. No crystals with the dihydrogenphosphate anion or a metal‐bound piperazine ligand could be isolated under the reaction conditions. The solid‐state assembly in the isomorphous structures of [M(H₂O)₆](C₄H₁₂N₂)(HPO₄)₂ with M = Co and Ni is based on an extended hydrogen bonded network between the three ionic building blocks.     

The preparation and characterization of mono- and bis-chelated cadmium(II) complexes of the di-2-pyridylketone Schiff base of S-methyldithiocarbazate (Hdpksme) and the X-ray crystal structure of the [Cd(dpksme)2] · 0.5 MeOH complex

New cadmium(II) complexes of empirical formulae, [Cd(dpksme)X] (dpksme = anionic form of the Schiff base; X = NCS^–, Cl^–, I^–) and [Cd(dpksme)₂] · 0.5MeOH, respectively have been prepared and characterized. The mono-ligated cadmium(II) complexes, [Cd(dpksme)X] are four-coordinate and tetrahedral but the bis-ligand complex, [Cd(dpksme)₂] · 0.5MeOH is six-coordinate and octahedral. The crystal and molecular structure of [Cd(dpksme)₂] · 0.5MeOH has been determined by X-ray diffraction. The complex has a distorted mer-octahedral structure in which the ligands are coordinated as uninegatively charged tridentate chelating agents via the pyridine nitrogen atoms, the azomethine nitrogen atoms and the thiolate sulfur atoms. The distortion from regular octahedral geometry is ascribed to the restricted bite angles of the ligands. The Schiff base and its cadmium(II) complexes exhibit mild antibacterial activities against Shigella dysenteriae, Bacillus cereus, Staphylococcus aureus and Escherichia coli. They are also mildly fungitoxic against the phytopathogenic fungi, Alternaria alternata and Macrophomina phaseolina.     

Structural analysis of phosphatidylcholines by post-source decay matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The utility of post-source decay (PSD) matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was investigated for the structural analysis of phosphatidylcholine (PC). PC did not produce detectable negative molecular ion from MALDI, but positive ions were observed as both [PC+H](+) and [PC+Na](+). The PSD spectra of the protonated PC species contained only one fragment corresponding to the head group (m/z 184), while the sodiated precursors produced many fragment ions, including those derived from the loss of fatty acids. The loss of fatty acid from the C-1 position (sn-1) of the glycerol backbone was favored over the loss of fatty acid from the C-2 position (sn-2). Ions emanating from the fragmentation of the head group (phosphocholine) included [PC+Na-59](+), [PC+Na-183](+) and [PC+Na-205](+), which corresponded to the loss of trimethylamine (TMA), non-sodiated choline phosphate and sodiated choline phosphate, respectively. Other fragments reflecting the structure of the head group were observed at m/z 183, 146 and 86. The difference in the fragmentation patterns for the PSD of [PC+Na](+) compared to [PC+H](+) is attributed to difference in the binding of Na(+) and H(+). While the proton binds to a negatively charged oxygen of the phosphate group, the sodium ion can be associated with several regions of the PC molecule. Hence, in the sodiated PC, intermolecular interaction of the negatively charged oxygen of the phosphate group, along with sodium association at multiple sites, can lead to a complex and characteristic ion fragmentation pattern. The preferential loss of sn-1 fatty acid group could be explained by the formation of an energetically favorable six-member ring intermediate, as apposed to the five-member ring intermediate formed prior to the loss of sn-2 fatty acid group.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

An expedient esterification of aromatic carboxylic acids using sodium bromate and sodium hydrogen sulfite

Treatment of aromatic carboxylic acids and substituted toluenes with a mixture of sodium bromate and sodium hydrogen sulfite in a two-phase system gave the corresponding esters in good yield. The intermediate α-brominated toluene was formed by the in situ generated hypobromous acid. The α-bromotoluene underwent an intermolecular nucleophilic substitution reaction with aromatic carboxylic acids present in the reaction mixture to afford the corresponding esters.     

Spectrophotometric determination of trimethoprim by oxidation in drug formulations

A spectrophotometric determination of trimethoprim is described based on the reaction of its amine group with persulfate which acts as a strong oxidizing agent in alkaline media. The reaction produces a stable yellow colored compound after heating in a boiling water bath for 30 min. At λ_max 355 nm, Beer’s law is obeyed in the concentration range 10–60 μg ml^–1 with a molar absorptivity of 2.7 × 10³ l mol^–1cm^–1. The method is applied to formulations with sulfamethoxazole. Received: 30 July 1996 / Revised: 16 October 1996 / Accepted: 22 October 1996     

Development and Validation of Kinetic Spectrophotometric Method for the Determination of Losartan Potassium in Pure and Commercial Tablets

A validated kinetic spectrophotometric method has been developed for the determination of losartan potassium in pure and dosage forms. The method is based on oxidation of the losartan potassium with alkaline potassium permanganate at room temperature (25 ± 1 °C). The reaction is followed spectrophotometrically by measuring the increase in absorbance with time at 603 nm, and the initial rate, fixed time (at 12.0 min) and equilibrium time (at 90.0 min) methods are adopted for constructing the calibration graphs. All the calibration graphs are linear in the concentration range of 7.5–60.0 μg mL^?1 and the calibration data resulted in the linear regression equations of n? = ?6.422 × 10^?7 + 1.173 × 10^?5 C, A =3.30 × 10^?4 + 5.28 × 10^?3 C and A = ?2.09 × 10^?2 + 1.05 × 10^?1 C for initial‐rate, fixed time and equilibrium time methods, respectively. The limits of detection for initial rate, fixed time and equilibrium time methods are 0.71, 0.21 and 0.19 μg mL^?1, respectively. The activation parameters such as E_a, ΔH^?, ΔS^?, and ΔG^? are also determined for the reaction and found to be 87.34 KJ mol^?1, 84.86 KJ mol^?1, 50.96 JK^?1 mol^?1 and ?15.10 KJ mol^?1, respectively. The variables are optimized and the proposed methods are validated as per ICH guidelines. The method has been applied successfully to the estimation of losartan potassium in commercial tablets. The performance of the proposed methods was judged by calculating paired t‐ and F‐ values. The analytical results of the proposed methods when compared with those of the reference method show no significant difference in accuracy and precision and have acceptable bias.