A new synthesis of 1,3-dienes from allyl sulfides and allyl sulfones using tri-n-butylstannylmethyl iodide

Allyl 2-pyridyl sulfide $\text{6}$ or allyl phenyl sulfone $\text{7}$ on treatment with n-butyllithium in tetrahyrofuran followed by tri-n-butylstannylmethyl iodide ($\text{4}$) afforded directly the 1,3-diene $\text{8}$ in good yield.     

High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) and its model compounds

High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) were studied in comparison with those of the model formals obtained from stereoisomers of pentane-2,4-diol and heptane-2,4,6-triol in order to learn spectral changes due to differences of the steric structures of the polymer. In the NMR spectrum of transformal obtained from dl diol or dl,dl (syndiotactic) triol, all proton signals were well interpreted by assuming a rapid chair-chair inversion of the formal ring. On the other hand, no such inversion was observed spectroscopically in cis-formal obtained from the meso diol or meso,meso (isotactic) triol, and the cis-formal ring was supposed to take a diequatorial form preferentially. Consequently, dioxymethylene protons gave a single peak (equivalent) in trans-formal and an AB quartet (nonequivalent) in cis-formal. In the spectra of poly(vinyl formal), the dioxymethylene signal was an overlap of the singlet and quartet in dimethylsulfoxide solution. Observations of the spectra of various poly(vinyl formals) obtained from poly(vinyl alcohols) of different tacticities and study of temperature dependence of the signal have shown that the singlet and quartet are attributed to trans- and cis- formals, respectively, in the polymer spectrum also. In the infrared spectra of poly(vinyl formals), the 800 and 785 cm^-1 bands were found to be related to cis- and trans-formal rings respectively. A linear relationship was confirmed between D₇₈₅/D₈₀₀ and trans/cis ratios determined from the peak intensities of the dioxymethylene proton signals.     

Three-component coupling of acylphosphonates and two carbonyl compounds promoted by low-valent samariums: one-Pot synthesis of beta-hydroxyphosphonates

Three-component coupling of acylphosphonates and two carbonyl compounds leading to beta-hydroxyphosphonates has been achieved with low-valent samariums. Thus, acylphosphonates reacted with aldehydes in the presence of semicatalytic amounts of samarium metal or SmI(2) to give acyloxyphosphonates in good yields. The second coupling reaction of the acyloxyphosphonates with aldehydes or ketones promoted by SmI(2) afforded beta-hydroxyphosphonates instead of olefins. Moreover, these two reactions could be carried out in one pot.     

Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.     

Photophysics of aromatic molecules with low-lying pi sigma* states: excitation-energy dependence of fluorescence in jet-cooled aromatic nitriles

Excitation-energy dependence of fluorescence intensity and fluorescence lifetime has been measured for 4-dimethylaminobenzonitrile (DMABN), 4-aminobenzonitrile (ABN), 4-diisopropylaminobenzonitrile (DIABN), and 1-naphthonitrile (NN) in a supersonic free jet. In all cases, the fluorescence yield decreases rather dramatically, whereas the fluorescence lifetime decreases only moderately for S1 (pi pi*, L(b)) excess vibrational energy exceeding about 1000 cm(-1). This is confirmed by comparison of the normalized fluorescence excitation spectrum with the absorption spectrum of the compound in the vapor phase. The result indicates that the strong decrease in the relative fluorescence yield at higher energies is due mostly to a decrease in the radiative decay rate of the emitting state. Comparison of the experimental results with the TDDFT potential energy curves for excited states strongly suggests that the decrease in the radiative decay rate of the aminobenzonitriles at higher energies is due to the crossing of the pi pi* singlet state by the lower-lying pi sigma*(C[triple bond]N) singlet state of very small radiative decay rate. The threshold energy for the fluorescence "break-off" is in good agreement with the computed energy barrier for the pi pi*/pi sigma* crossing. For NN, on the other hand, the observed decrease is in fluorescence yield at higher excitation energies can best be attributed to the crossing of the pi pi* singlet state by the pi sigma* triplet state.     

Highly diastereoselective chemoenzymatic synthesis of (2′R)- and (2′S)-2′-deoxy[2′-H]guanosines

In an effort to develop an efficient synthetic method of highly diastereoselective (2′R)- and (2′S)-2′-deoxy[2′-²H]guanosines, chemoenzymatic conversion was investigated. The synthesis of (2′R > 98% de)-2′-deoxy[2′-²H]guanosine was achieved by biological transdeoxyribosylation using (2′R > 98% de)-2′-deoxy[2′-²H]uridine, 2,6-diaminopurine, and Enterobacter aerogenes AJ-11125, followed by treatment with adenosine deaminase. (2′S > 98% de)-2′-Deoxy[2′-²H]guanosine was synthesized from (2′S > 98% de)-2′-deoxy[2′-²H]uridine and 2,6-diaminopurine using thymidine phosphorylase and purine nucleoside phosphorylase instead of E. aerogenes AJ-11125.     

Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

A temperature study on critical micellization concentration (CMC), solubility, and degree of counterion binding of α-sulfonatomyristic acid methyl ester in water by electroconductivity measurements

 For a sodium salt of α-sulfonatomyristic acid methyl ester (14SFNa), one of the α-SFMe series surfactants, critical micellization concentration (CMC), solubility and degree of counterion binding (β) were determined by means of electrocon-ductivity measurements at different temperatures (at every 5 °C) ranging from 15 to 50 °C. The phase diagram of 14SFNa in pure water was constructed from the CMC- and solubility-temperature data, in which the Krafft temperature (critical solution temperature) was found around 0 °C. The changes in the Gibbs energy, ΔG ⁰ _m, enthalpy, ΔH ⁰ _m, and entropy, ΔS ⁰ _m, upon micelle formation as a function of temperature were evaluated taking βvalues into calculation. Received: 28 August 1996 Accepted: 5 November 1996     

Synthesis of monohalocyclopropane derivatives from olefins by the reaction with trihalomethanes and copper

Fluoro-, chloro-, bromo-, and iodocyclopropane derivatives were obtained in 10–80% yields by the reaction of FCHI₂, ClCHI₂, BrCHI₂, and CHI₃, respectively, with Cu in the presence of olefins. The reaction was electrophilic, and proceeded stereospecifically, i.e., cis and trans olefins afforded cyclopropane derivatives whose configurations with respect to the substituents from original olefins were cis and trans, respectively. Since isomeric olefins were not detected in the reaction mixture which would be expected from the insertion of the corresponding free monohalocarbenes into C—H bonds, the reaction seemed to proceed via organocopper intermediates rather than free monohalocarbenes. With respect to the configuration of the halogen introduced by the new reaction, the cis or endo isomers were generally obtained predominantly over the corresponding trans or exo isomers.