Rapid determination method of radiocesium in sea water by cesium-selective resin

A rapid and precise method of determining radiocesium corresponding to 5 mrem/y, the Japan AEC's guideline, was proposed. The development and practical performance of cesium-selective resin and the determination method was described in this paper. The resin was prepared by the formation of ammonium molybdophosphate in the structure of Amberlite XAD-7 resin. It took only 3 hours to carry out all the procedures the authors proposed. This value represents 1/10∼1/2 of the time of conventional method. The concentration of¹³⁷Cs and¹³⁴Cs in sea water was determined to be 0.13∼0.16 pCi/1 and less than 7.1·10⁻² pCi/1, respectively.     

Aurilide, a cytotoxic depsipeptide from the sea hare Dolabella auricularia: isolation, structure determination, synthesis, and biological activity

The bioassay-guided fractionation of the cytotoxic constituents of the Japanese sea hare Dollabella auricularia led to the isolation of aurilide (1), a 26-membered cyclodepsipeptide. The gross structure of 1 was established by spectroscopic analysis including 2D NMR techniques. The absolute stereostructure was determined by chiral HPLC analysis of acid hydrolysates of 1 and by the enantioselective synthesis of a degradation product arising from a dihydroxylated fatty acid portion. The enantioselective synthesis of 1 was achieved in 12% overall yield (16 steps) and confirmed the absolute stereostructure of 1. The cytotoxicity of 1 was evaluated using a synthetic sample, which was found to exhibit potent cytotoxicity against HeLa S₃ cells with an IC₅₀ of 0.011 μg/mL. Further biological and pharmacological studies of 1 have been carried out by using synthetic 1.     

Partial purification and characterization of a factor for the enhancement of colony formation in vitro by myeloid progenitor cells.

We have purified a factor, hematopoietic promoting factor (HPF), from porcine kidney extract (PKE), which exhibits a promoting activity on granulocyte/macrophage (GM) colony and burst-forming-unit-erythroid (BFU-E)-derived colony formation by progenitors from murine bone marrow cells in vitro. The addition of HPF resulted in an enhancement of the GM colonies as well as BFU-E-derived colonies, but did not enhance the colony-forming-unit-erythroid (CFU-E)-derived colony formation. HPF was added to the BFU-E cultures together with cytokines, such as recombinant murine interleukin-3 (IL-3), recombinant murine GM colony-stimulating-factor (GM-CSF) and recombinant human G-CSF, which have all been shown to enhance BFU-E growth. The combination of HPF plus these cytokines resulted in an enhancement of benzidine negative colony formation in comparison to the case of each cytokine alone; however, no increase was found on BFU-E colony formation. HPF is able to enhance the granulopoiesis and erythropoiesis in vitro. And the synergistic activity of HPF is significantly affected by the presence of cytokines in the cultures.     

Preparation and photochromism of diarylethene covalently bonded onto layered sodium-magadiite surfaces

Diarylethene derivatives (DE) covalently bonded to silanol oxygens of layered silicate surfaces, i.e., magadiite (Mag), were synthesized and investigated for their photochromic behavior. The DE-Mag layered hybrids were found to undergo reversible color change by alternating UV and visible light irradiation. A more highly efficient, reproducible photochromic behavior was realized with DE-Mag than with a corresponding DE-Si possessing silyl substituents on DE in place of the Mag surface. Moreover, the present covalently bonded DE exhibited an improvement over DE hybrids incorporated in layered double hydroxide (LDH) clays, in which the repetitive photochromic behavior decreased during alternating irradiation, due to the accumulation of the photochemically inert parallel isomers of DE.     

A comparison of supercritical carbon dioxide and organic solvents for the intercalation of 4-phenylazoaniline into a pillared clay mineral

The intercalation of 4-phenylazoaniline (PAA) in supercritical carbon dioxide (SC-CO(2)) into montmorillonite (TMA-Mnt) pillared with tetramethylammonium ions at 313 K and 15 MPa was investigated. The adsorption rate and equilibrium PAA uptake were compared with those in n-hexane, CCl(4) and benzene solutions at 313 K. The XRD and N(2) adsorption/desorption analyses showed that TMA-Mnt after adsorption of PAA in SC-CO(2) had the same pore structure as after adsorption of PAA in normal solvents. SC-CO(2) was found to be a good medium for PAA adsorption owing to its having a relatively high adsorption rate and the highest adsorptivity at the same PAA concentration. The properties of PAA adsorption on TMA-Mnt could be well elucidated by the difference in solubility parameters between liquid and solid phases.     

Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.     

Solvent extraction of sodium picrate with 15-crown-5 into carbon tetrachloride. The determination of the dimer-formation constant of a crown ether-univalent metal salt 1∶1∶1 complex

The theory is derived to determine the dimer-formation constant,K ₂, of a crown ethermetal salt 111 complex in organic solvents of low dielectric constant by solvent extraction. The theoretical predictions are verified experimentally by extraction of sodium picrate (NaA) with 15-crown-5 (15C5) into carbon tetrachloride. All the experiments were conducted at 25°C. The logK ₂ value of the Na(15C5)A complex in carbon tetrachloride has been determined to be 4.05±0.11. Moreover, the partition constant of the complex is calculated.