Cationic polymerization of formaldehyde in liquid carbon dioxide. Part I

A cationic polymerization of formaldehyde which gave a high molecular weight polymer was studied in liquid carbon dioxide at 20–50°C. In the polymerization without any catalyst both the rate of polymerization and the molecular weight of the resulting polymer increased rapidly with a decrease in the loading density of the monomer solution to the reaction vessel, and also increased with an increase in the initial monomer concentration. From these results it was concluded that the initiating species could be ascribed to an impurity contained in the monomer solution. Both the rate of polymerization and the degree of polymerization of the polymer also increased with rising temperature. The carboxylic acid added acted as a catalyst in the polymerization because of increase in the polymer yield, the molecular weight of polymer formed, and the number of moles of polymer chain with increasing dissociation constant of acid used. It was concluded that the polymerization in liquid carbon dioxide proceeded by a cationic mechanism. Methyl formate had no influence on the polymerization, but methanol and water acted as a chain-transfer agent.     

Direct observation of adduct formation of alkyl and aromatic iodides with cl atoms using cavity ring-down spectroscopy

The reactions of Cl atoms with RI (R = n-C3H7, n-C4H9, cyclo-C6H11, C6H5, C6F5, and p-CH3C6H4) have been studied using cavity ring-down spectroscopy at a temperature range of 233-313 K and at 100 Torr total pressure of N2 diluent. Visible absorption spectra of the RI-Cl adducts were recorded at 440-520 nm at 263 K. The yields of the adducts were temperature-dependent. There was no discernible reaction of the adducts in the presence of 100 Torr of O2 at 263 K. Theoretical calculations were performed for C4H9I-Cl and C6H5I-Cl for quantitative explanation of the absorption spectra and the strength of the I-Cl bonds in the charge-transfer complexes. Evidence for the adduct formation following the reaction of Cl with C6H5Br was sought but not found at 440 and 520 nm.     

Studies on the biosynthesis of terrecyclic acid A II confirmation of the cyclization mechanism and hydrogen shifts using [2-2H3]acetate and [213C2H3]acetate

Feeding experiments with [2-³H₃]acetate and [2-¹³C²H₃]acetate in $\text{Aspergillus terreus}$ Thom No. 14 indicated that the hydrogen at C-2 in terrecyclic acid A is incorporated without migration from the precursor acetic acid; the results favour our group's earlier speculation for the cyclization to the tricyclic skeleton in the biosynthetic scheme.     

Novel gas chromatography-mass spectrometry database for automatic identification and quantification of micropollutants

A novel gas chromatography-mass spectroscopy (GC-MS) database for identification and quantification of micropollutants in environmental and food samples is reported. GC retention times, calibration curves, and mass spectra of nearly 700 chemicals were registered in the database, and the GC retention times of registered chemicals in actual samples were predicted from the retention times of n-alkanes measured before sample analysis. Differences between predicted and actual retention times were less than 3 s, an accuracy that is nearly identical to that obtained by analysis of standard substances. After the retention times were predicted, a calibration file for the GC-MS instrument was created from the predicted retention times, calibration curves, and mass spectra of the registered chemicals. With the resulting calibration file, automated identification of all the chemicals in actual samples was possible without the use of standards, and the identification method was as reliable as conventional methods. When the GC inlet, column, and tuning conditions were adjusted using GC-MS performance check standards, relative standard deviations of 20% or less for determination values could be obtained. More than 90% of the chemicals in the database could be detected at a sensitivity sufficient for all practical purposes (100 pg or less). Because each chemical in the database, to which new substances can easily be added, can be determined in 1 h, micropollutants in samples can be analyzed efficiently and inexpensively.     

Retardation of discoloration of poly(vinyl chloride) and decolorization of discolored poly(vinyl chloride) with diimide

Retardation of discoloration of poly(vinyl chloride) with diimide was studied in dimethylformamide at 130°C. with the use of p-toluenesulfonylhydrazide (PSH) as a source of diimide. A process was proposed that involved prolonging the induction periods of discoloration by inhibiting the development of conjugated polyene structure. The optimum proportion of PSH was one fourth of the poly(vinyl chloride), the best results. Furthermore, poly(vinyl chloride) discolored by thermal degradation in o-dichlorobenzene or gamma-ray irradiation under vacuum was decolorized in solution at 130°C. by addition of PSH. The decolorized poly(vinyl chloride) thus obtained was thermally stable compared with that obtained by oxidative methods.     

Extraction Equilibria between Benzene and Water of Uni- and Bivalent Metal Picrates with Lariat 16-Crown-5: Effect of the Side Arms on the Extraction Ability and Selectivity

The overall extraction constants (K_ex) of uni- andbivalent metal picrates with 15-(2,5-dioxahexyl)-15-methyl-16-crown-5(L16C5) were determined between benzene and water at 25°C. TheK_ex values were analyzed into the constituent equilibriumconstants, i.e., the extraction constant of picric acid, the distributionconstant of the crown ether, the stability constant of the metalion–crown ether complex in water, and the ion-pair extraction constantof the complex cation with the picrate anion. The K_ex valuedecreases in the orders Ag⁺ > Na⁺ >Tl⁺ > K⁺ > Li⁺ andPb²⁺ > Ba²⁺ > Sr²⁺ for theuni- and bivalent metals, respectively, which are the same as those observedfor 16C5. The extraction selectivity was found to be governed by theselectivity of the ion-pair extraction of the L16C5–metal picratecomplex rather than by that of the complex formation in water. Theextraction ability of L16C5 is smaller for all the metals than that of 16C5,which is mostly attributed to the higher lipophilicity of L16C5. Differencesin the extraction selectivity between L16C5 and 16C5 were observed for thebivalent metals but little for the univalent metals. The side-arm effect onthe extraction selectivity was interpreted on the basis of the negativecorrelation between the effect on the complex stability constant in waterand that on the ion-pair extraction constant.     

ESR study of free radicals produced in polyethylene irradiated by ultraviolet light

ESR studies of ultraviolet-irradiated polyethylene (PE) were carried out. Irradiation effects different from those of high-energy radiation are observed. Ultraviolet radiation is absorbed selectively, and especially in carbonyl groups in PE produced by oxidation. Radicals produced were identified as \documentclass{article}\pagestyle{empty}\begin{document}$ \hbox{---} {\rm CH}_2 \hbox{---} {\dot {\rm C}} {\rm H} \hbox{---}{\rm CHO}$\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ \hbox{---} {\rm CH}_2 \hbox{---} {\dot {\rm C}} {\rm H} \hbox{---}{\rm CH}_2 \hbox{---}$\end{document}. Some radicals giving a quintet signal stable at room temperature were also observed but remained unidentified. The radical \documentclass{article}\pagestyle{empty}\begin{document}$ \hbox{---} {\rm CH}_2 \hbox{---} {\dot {\rm C}} {\rm H} \hbox{---}{\rm CHO}$\end{document} undergoes a mutual conversion with the acyl radical:      

Structural confirmation of oligosaccharides newly isolated from sugar beet molasses

ABSTRACT: BACKGROUND: Sugar beet molasses is a viscous by-product of the processing of sugar beets into sugar. The molasses is known to contain sucrose and raffinose, a typical trisaccharide, with a well-established structure. Although sugar beet molasses contains various other oligosaccharides as well, the structures of those oligosaccharides have not been examined in detail. The purpose of this study was isolation and structural confirmation of these other oligosaccharides found in sugar beet molasses. RESULTS: Four oligosaccharides were newly isolated from sugar beet molasses using high-performance liquid chromatography (HPLC) and carbon-Celite column chromatography. Structural confirmation of the saccharides was provided by methylation analysis, matrix-assisted laser desorption/ionaization time of flight mass spectrometry (MALDI-TOF-MS), and nuclear magnetic resonance (NMR) measurements. CONCLUSION: The following oligosaccharides were identified in sugar beet molasses: beta-D-galactopyranosyl-(1- > 6)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named beta-planteose), alpha-D-galactopyranosyl-(1- > 1)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named1-planteose), alpha-D-glucopyranosyl-(1- > 6)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (theanderose), and beta-D-glucopyranosyl-(1- > 3)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (laminaribiofructose). 1-planteose and laminaribiofructose were isolated from natural sources for the first time.     

Dielectrically controlled resolution (DCR) of 3-aminopiperidine via diastereomeric salt formation with N-tosyl-(S)-phenylalanine

A useful key intermediate for the dipeptidyl peptidase-4 (DPP-4) inhibitor, 3-aminopiperidine 1, was successfully resolved with an enantiomerically pure resolving agent, N-tosyl-(S)-phenylalanine 2, to give both stereoisomers (R)-1 and (S)-1 as a less-soluble diastereomeric salt with (S)-2, via a dielectrically controlled resolution (DCR) phenomenon.     

On the dynamics of ferro- and antiferro-electric liquid crystals

Abstract

In this work, a set of Landau–Ginzburg equations to investigate the dynamic properties of ferro- and antiferro-electric smectic phases is formulated on the basis of the elastic continuum theory of compressible smectics. In the present framework, the polarization electric field is consistently taken into account through the Poisson equation as seen in our previous work. As a practical application, a few numerical results are presented for the surface-stabilized geometry with inclined and chevron layer structures. An asymmetric bistable switching is found to be achieved in the chevron layer structure under an alternating external field. In an inclined layer structure, however, a symmetric switching is found to be possible. In addition, it is first presented from a theoretical standpoint that the compressible smectic layer structure may be drastically deformed in the chevron and inclined layer structures with a sufficiently large external field.