A stroboscopic approach for fast photoactivation-localization microscopy with Dronpa mutants

The photophysical properties and photoswitching scheme of the reversible photoswitchable green fluorescent protein-like fluorescent proteins Dronpa-2 and Dronpa-3 were investigated by means of ensemble and single-molecule fluorescence spectroscopy and compared to those of the precursor protein Dronpa. The faster response to light and the faster dark recovery of the new mutants observed in bulk also hold at the single-molecule level. Analysis of the single-molecule traces allows us to extract the efficiencies and rate constants of the pathways involved in the forward and backward switching, and we find important differences when comparing the mutants to Dronpa. We rationalize our results in terms of a higher conformational freedom of the chromophore in the protein environment provided by the beta-can. This thorough understanding of the photophysical parameters has allowed us to optimize the acquisition parameters for camera-based sub-diffraction-limit imaging with these photochromic proteins. We show that Dronpa and its mutants are useful for fast photoactivation-localization microscopy (PALM) using common wide-field microscopy equipment, as individual fluorescent proteins can be localized several times. We provide a new approach to achieve fast PALM by introducing simultaneous two-color stroboscopic illumination.     

Investigation of the first shot phenomenon in MALDI mass spectrometry of protein complexes

Matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) of noncovalent protein complexes is difficult, due to the disruptive nature of processes occurring during MALDI sample preparation and ion formation. Sometimes the observation of intact noncovalent protein complexes with MALDI is only possible if data are acquired from the first laser shot fired at a fresh sample; this is called the 'first shot phenomenon'. To study the origin of the first shot phenomenon, we used MALDI-MS and confocal laser scanning microscopy (CLSM) to examine typical MALDI sample preparations with embedded protein complexes, labeled with fluorophores. Fluorescence energy transfer techniques allowed the differentiation between intact and dissociated protein complexes with CLSM. In cases where a first shot behavior was observed by MALDI-MS, it was found to be accompanied by localization of protein complexes at the exterior of the sample crystals. Segregation of the large protein complexes to the exterior and dissociation of the complexes in the crystal interior during sample crystallization can rationalize this observation.     

Factorial analysis of the trihalomethanes formation in water disinfection using chlorine

The factors that affect trihalomethane (THM) (chloroform, bromodichloromethane, chlorodibromomethane and bromoform) formation from the chlorination of aqueous solutions of hydrophobic fulvic acids (FA) were investigated in a prototype laboratorial simulation using factorial analysis. This strategy involved a fractional factorial design (16 plus 5 center experiments) of five factors (fulvic acids concentration, chlorine dose, temperature, pH and bromide concentration) and a Box Behnken design (12 plus 3 center experiments) for the detailed analysis of three factors (FA concentration, chlorine dose and temperature). The concentration of THM was determined by headspace analysis by GC-ECD. The most significant factors that affect the four THM productions were the following: chloroform-FA concentration and temperature; bromodichloromethane-FA concentration and chlorine dose; chlorodibromomethane-chlorine dose; and, bromoform-chlorine dose and bromide concentration. Moreover, linear models were obtained for the four THM concentrations in the disinfection solution as function of the FA concentration, chlorine dose and temperature, and it was observed that the complexity of the models (number of significant factors and interactions) increased with increasing bromine atoms in the THM. Also, this study shows that reducing the FA concentration the relative amount of bromated THM increases.     

Validation of a high-performance liquid chromatographic method with fluorescence detection for the simultaneous determination of tetracyclines residues in bovine milk

A high-performance liquid chromatography-fluorescence detection method was optimized and validated to determine tetracyclines residues in bovine milk. Post-column derivatization using metal complexation in non-aqueous reagent increased the fluorescence of chelates by a factor up to 2.54 compared to water (signal-to-noise ratio enhancement). Overall recoveries ranged from 61 to 115%, with RSD_r from 5 to 15% (n = 54). Detection limits ranged from 5 to 35 μg kg⁻¹. Limits of quantification were established at 50 μg kg⁻¹. Decision limits (CCα) were 109, 108 and 124 μg kg⁻¹ and detection capabilities (CCβ) 119, 117 and 161 μg kg⁻¹ for oxytetracycline, tetracycline and chlortetracycline, respectively. The method was applied successfully in a national monitoring program.     

Growth dynamics of CdTe nanoparticles in liquid and crystalline phases

Normally the size dependence of the chemical potential is used to explain the growth dynamics of semiconductor nanoparticles. Instead we show that very small CdTe nanoparticles continue to grow at high dilution, the growth rate is virtually independent of monomer concentration, nucleation continues after the growth of larger particles has saturated, and the growth rate has a much greater nonlinear dependence on particle size than predicted by theory. We suggest that nanoparticle growth is fast in the liquid phase and then saturates as the particles change phase from liquid to crystal at a threshold size which depends on the growth temperature and not the monomer concentration. The photoluminescence quantum efficiency becomes high when tellurium is depleted in the reaction solution giving a cadmium enriched surface.     

Simultaneous distillation-extraction of high-value volatile compounds from Cistus ladanifer L

The present paper describes a procedure to isolate volatiles from rock-rose (Cistus ladanifer L.) using simultaneous distillation-extraction (SDE). High-value volatile compounds (HVVC) were selected and the influence of the extraction conditions investigated. The effect of the solvent nature and extraction time on SDE efficiency was studied. The best performance was achieved with pentane in 1 h operation. The extraction efficiencies ranged from 65% to 85% and the repeatability varied between 4% and 6% (as a CV%).The C. ladanifer SDE extracts were analysed by headspace solid phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The HS-SPME sampling conditions such as fiber coating, temperature, ionic strength and exposure time were optimized. The best results were achieved with an 85 μm polyacrylate fiber for a 60 min headspace extraction at 40 °C with 20% (w/v) of NaCl. For optimized conditions the recovery was in average higher than 90% for all compounds and the intermediate precision ranged from 4 to 9% (as CV %). The volatiles α-pinene (22.2 mg g⁻¹ of extract), 2,2,6-trimethylcyclohexanone (6.1 mg g⁻¹ of extract), borneol (3.0 mg g⁻¹ of extract) and bornyl acetate (3.9 mg g⁻¹ of extract) were identified in the SDE extracts obtained from the fresh plant material.     

Cryogenic grinding pre-treatment improves extraction efficiency of fluoroquinolones for HPLC-MS/MS determination in animal tissue

An efficiency extraction of fluoroquinolones in chicken muscle was achieved by pulverizing it in a freezer mill before treatment with NaOH (10mM)/MeCN (1:1). The improvement of cryogenic grinding in the extraction was demonstrated for the same piece (whole leg) of four chickens treated with enrofloxacin in equal doses. A confirmatory method based on high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) was used to analyze the extracts. The chromatographic separation was achieved in 5min with a Synergi Fusion-RP 80A (50 x 2mm, 4μm) column filled with a hybrid polymer. The HPLC was coupled with a detector based in a quadrupole–linear ion trap Q-TRAP that allows a confirmatory detection according to the European legislation. The specificity of the method was assessed by testing a number of representative blank muscle samples (n = 10) to verify the absence of potential interfering compounds. The limits of detection and quantitation were 2 and 5ng g^-1 of quinolones in muscle samples, respectively. The chromatographic method was demonstrated to be linear for the range studied (5–500ng g^-1) with the P value for lack-of-fit in the ANOVA table greater or equal to 0.10 (calibration coefficient 0.9998 and 0.9996 for ciprofloxacin and enrofloxacin, respectively). The mean intra-day relative standard deviation (RSD) (n = 6, c = 50ng g^-1) was 6%; inter-day assay gave a RSD of 12%. The extraction and clean-up were carried out in one step with very satisfactory recovery data (between 65 and 101%).     

A rapid method based on hot water extraction and liquid chromatography-tandem mass spectrometry for analyzing tetracycline antibiotic residues in cheese

A rapid, specific, and sensitive procedure for determining residues of 4 widely used tetracycline antibiotics and 3 of their 4-epimers in cheese is presented. The method is based on the matrix solid-phase dispersion (MSPD) technique followed by liquid chromatography/tandem mass spectrometry (LC/MS/MS). After dispersing samples of mozzarella, asiago, parmigiano, gruyere, emmenthal, and camembert on sand, target compounds were eluted from the MSPD column by passing through it 6 mL water heated at 70 degrees C. After acidification and filtration, 200 microL of the aqueous extract was directly injected into the LC column. For analyte identification and quantification, MS data acquisition was performed in the multireaction monitoring mode, selecting 2 precursor ion-to-product ion transitions for each target compound. Hot water appeared to be an efficient extractant, because absolute recoveries were no lower than 78%. Using demeclocycline as a surrogate analyte, recoveries of analyte added to the 6 types of cheeses at the 30 ng/g level were 96-117%, with relative standard deviation (RSD) not higher than 9%. Statistical analysis of the mean recovery data showed that the extraction efficiency was not dependent on the type of cheese analyzed. This result indicates that this method could be applied to other cheese types not considered here. At the lowest concentration considered, i.e., 10 ng/g, the accuracy of the method ranged between 90 and 107%, with RSDs not larger than 12%. Based on a signal-to-noise ratio of 10, limits of quantitation were estimated to be 1-2 ng/g.     

Rotational fluctuations of water confined to layered oxide materials: nonmonotonous temperature dependence of relaxation times

The rotational molecular dynamics of water confined to layered oxide materials with brucite structure was studied by dielectric spectroscopy in the frequency range from 10(-2) to 10(7) Hz and in a broad temperature interval. The layered double hydroxide samples show one relaxation process, which was assigned to fluctuations of water molecules forming a layer, strongly adsorbed to the oxide surface. The temperature dependence of the relaxation rates has an unusual saddlelike shape characterized by a maximum. The model of Ryabov et al. (J. Phys. Chem. B 2001, 105, 1845) recently applied to describe the dynamics of water molecules in porous glasses is employed also for the layered materials. This model assumes two competing effects: rotational fluctuations of water molecules that take place simultaneously with defect formation, allowing the creation of free volume necessary for reorientation. The activation energy of rotational fluctuations, the energy of defect formation, a pre-exponential factor, and the defect concentration are obtained as main parameters from a fit of this model to the data. The values of these parameters were compared with those found for water confined to nanoporous molecular sieves, porous glasses, or bulk ice. Several correlations were discussed in detail, such as the lower the value of the energy of defect formation, the higher the number of defects. The pre-exponential factor increases with increasing activation energy, as an expression of the compensation law, and indicates the cooperative nature of the motional process. The involvement of the surface OH groups and of the oxygen atoms of the interlayer anions in the formation of hydrogen bonds was further discussed. For the birnessite sample, the relaxation processes are probably overlaid by a dominating conductivity contribution, which is analyzed in its frequency and temperature dependence. It is found that the conductivity of birnessite obeys the characteristics of semiconducting disordered materials. Especially the Barton/Nakajima/Namikawa relationship is fulfilled. Analyzing the temperature dependence of the direct current (dc) conductivity sigma0 in detail gives some hint that sigma0(T) has also an unusual saddlelike form.