An improved enzymatic assay for glucose determination in blood serum using a l,1′-dimethylferricinium dye

l,l′-dimethylferricinium (DMFe⁺),a stable and pH-insensitive blue dye, was prepared via enzymatic oxidation of a 1,1′-dimethylferrocene (DMFe):2-hydroxypropyl-β-cyclodextrin (HPCD) watersoluble inclusion complex, using bilirubin oxidase immobilized onto porous aminopropyl glass beads via glutaraldehyde activation. In the presence of glucose, DMFe⁺ was reduced to DMFe by reacting with the reduced glucose oxidase (FADH₂), and the absorbance decrease was followed at 650 nm. In acetate pH 5.2 buffer, the response to glucose in blood serum was nonlinear, especially in the low concentration range, because of a competition for the reduced glucose oxidase between the DMFe⁺ dye and oxygen. At this pH, endogenous ceruloplasmin was also observed to oxidize residual DMFe (16%) in the dye preparation, causing an increase in absorbance at 650 nm. An assay protocol was then developed using maleate buffer, pH 6.5, to overcome these interferences as well as mutarotation of α-D-glucose. The results obtained for glucose in the blood serum samples agreed well with those of the reference hexokinase/glucose-6-phosphate dehydrogenase method.     

Kinetic modeling of the adsorption rate of a gaseous adsorbate on a granular adsorbent by ultra-rapid-scanning Fourier transform infrared spectrometry

A novel method for determining the rates of adsorption of gaseous adsorbates on granular adsorbents in the millisecond time regime is described. Mixtures of the adsorbate and nitrogen are passed through a solenoid valve and 100 mg of the adsorbent for periods of (typically) 100 ms. The concentration of the adsorbate passing into a low-volume, long path length gas cell is measured with an ultra-rapid-scanning Fourier transform infrared spectrometer capable of gathering 200 mid-infrared spectra per second with 6-cm(-1) resolution. The pressure of the gas entering the cell is measured simultaneously with a capacitance manometer. A dynamic mathematical model was developed to analyze and describe the results in terms of a Langmuir isotherm. The success of this approach is demonstrated by the estimation of the rate of adsorption of vapor-phase acetaldehyde on aminopropylsilylated granular silica gel.     

Kinetics of the thermal unimolecular decomposition of hex-1-ene-3-yne. Heat of formation and resonance stabilization energy of the 3-ethenylpropargyl radical

The thermal unimolecular decomposition of hex-1-ene-3-yne (HEY) has been investigated over the temperature range 949–1230 K using the technique of very low-pressure pyrolysis (VLPP). One reaction pathway is the expected C₅? C₆ bond fission to form the resonance-stabilized 3-ethenylpropargyl radical. There is a concurrent process producing molecular hydrogen which probably occurs via the intermediate formation of hexatrienes and cyclohexa-1,3-diene. RRKM calculations yield the extrapolated high-pressure rate parameters at 1100 K given by the expressions 10^16.0±0.3 exp(?300.4 ± 12.6 kJ mol^?1/RT) s^?1 for bond fission and 10^13.2+0.4 exp(?247.7 ± 8.4 kJ mol^?1/RT) for the overall formation of hydrogen. The A factors were assigned from the results of previous studies of related alkynes, alkenes, and alkadienes. The activation energy for the bond fission reaction leads to ΔH [H₂CCHCC?H₂] = 391.9, DH [H₂CCHCCCH₂? H] = 363.3, and a resonance stabilization energy of 56.9 ± 14.0 kJ mol^?1 for the 3-ethenylpropargyl radical, based on a value of 420.2 kJ mol^?1 for the primary C? H bond dissociation energy in alkanes. Comparison with the revised value of 46.6 kJ mol^?1 for the resonance energy of the unsubstituted propargyl radical indicates that the ethenyl substituent (CH₂?CH) on the terminal carbon atom has only a small effect on the propargyl resonance energy. © John Wiley & Sons, Inc.     

The chemistry of electrogenerated transition metals species - the insertion of olefins into a nickelcarbon bond

The nickel(1) complex, Ni(teta)⁺, formed by cathodic reduction of the corresponding nickel(11) complex, reacts rapidly with alkyl bromides to form an unstable intermediate containing a nickelcarbon bond. When the electrolysis medium also contains an activated olefin an insertion reaction occurs. The new metalcarbon bond is cleaved by further reduction and overall the reduction of Ni(teta)²⁺ in the presence of RBr and CH₂CHY leads to high yiels of RCH₂CH₂Y.     

Aggregation and solubility behavior of asphaltenes and their subfractions

Asphaltenes from four different crude oils (Arab Heavy, B6, Canadon Seco, and Hondo) were fractionated in mixtures of heptane and toluene and analyzed chemically, by vapor pressure osmometry (VPO), and by small angle neutron scattering (SANS). Solubility profiles of the asphaltenes and their subfractions indicated strong cooperative asphaltene interactions of a particular subfraction that is polar and hydrogen bonding. This subfraction had lower H/C ratios and modestly higher N, V, Ni, and Fe contents than the less polar and more soluble subfraction of asphaltenes. VPO and SANS studies indicated that the less soluble subfractions formed aggregates that were considerably larger than the more soluble subfractions. In general, asphaltene aggregate size increased with decreasing solvent aromaticity up to the solubility limit, beyond which the aggregate size decreased with heptane addition. The presence of a low wavevector Q feature in the scattering curves at 25 degrees C indicated that the individual aggregates were flocculating; however, the intensity of the feature was diminished upon heating of the samples to 80 degrees C. The solubility mechanism for Canadon Seco asphaltenes, the largest aggregate formers, appears to be dominated by aromatic pi-bonding interactions due to their low H/C ratio and low nitrogen content. B6 and Hondo asphaltenes formed similar-sized aggregates in heptol and the solubility mechanism is most likely driven by polar interactions due to their relatively high H/C ratios and high nitrogen contents. Arab Heavy, the least polar asphaltene, had a H/C ratio similar to Canadon Seco but formed the smallest aggregates in heptol. The enhancement in polar and pi-bonding interactions for the less soluble subfraction indicated by elemental analysis is reflected by the aggregate size from SANS. The less soluble asphaltenes contribute the majority of species responsible for aggregation and likely cause many petroleum production problems such as pipeline deposition and water-in-oil emulsion stabilization.     

P and H NMR studies of the transesterification polymerization of polyphosphonate oligomers

Polymeric phosphonate esters are an interesting class of organophosphorus polymers because both the polymer backbone and phosphorus substituents can be modified. These polymers have been prepared by ring-opening polymerizations of cyclic phosphites, stoichiometric polycondensations of dimethyl phosphonate with diols in conjunction with diazomethane treatment and by transesterification of polyphosphonate oligomers. Our initial attempts to prepare high molecular weight polymeric phosphonate esters by the transesterification methods were unsuccessful. Results indicate that the reactions of dimethyl phosphonate with diols to form polyphosphonate oligomers with only methyl phosphonate end groups are plagued by a serious side reaction that forms phosphonic acid end groups. These end groups do not participate in the transesterification reaction and limit the molecular weights of the polymers that can be obtained. The phosphonic acid end groups can be converted into reactive methyl phosphonate end groups by treatment with diazomethane, however diazomethane is explosive and the polymerization is slow. An alternative route for the production of high molecular weight polymers is the transesterification of the 1,12-bis(methyl phosphonato)dodecane, formed by the reaction of excess dimethyl phosphonate and 1,12-dodecanediol, with a Na₂CO₃ promoter. This allows polymers with molecular weights of up to 4.5×10⁴ to be prepared, and no phosphonic acid end groups are observed in these polymers. Thermal analyses of the poly(1,12-dodecamethylene phosphonate) have shown that this polymer has reasonable thermal stability (onset of thermal decomposition at 273 °C). This polymer also undergoes a cold crystallization process at 15 °C similar to that which has been observed in some polyesters, polyamides and elastomers.     

Structure and magnetism of a new pyrazolate bridged iron(II) spin crossover complex displaying a single HS-HS to LS-LS transition

The dinuclear iron(II) complex [(pypzH)(NCSe)Fe([micro sign]-pypz)(2)Fe(NCSe)(pypzH)].2H(2)O displays a single, sharp spin crossover transition between the [HS-HS] and [LS-LS] states and is structurally characterised above and below the T(1/2)= 225 K value     

Intercrystalline links in polyethylene crystallized from the melt

Intercrystalline links in polyethylene have been revealed by crystallizing from the melt mixtures of fractionated polymer and the linear hydrocarbon n-C₃₂H₆₆, the latter constituent being removed later by washing at room temperature in an organic solvent. These fibrous links measure up to 15,000 A. in length and are 30–300 A. in thickness. Molecular chains are oriented parallel to the lengths of the links, and apparently nucleate on tie molecules formed by the simultaneous crystallization of different parts of the same molecule on the surfaces of different, and often widely separated, crystals. The maximum length of the links found in a given polymer varies as the square root of molecular weight, and there are indications that molecules in the melt are much more extended than is predicted by conventional configurational statistics. The links are under tension and presumably exert a significant influence on physical properties.     

On-line LC-GC-AED and LC-GC-MS – multidimensional methods for the analysis of PAC in fuels,combustion emissions and atmospheric samples

The composition and concentration of polycyclic aromatic compounds (PAC) in fuels. Theier combustion products and in the atmosphere remains a topic of considerable interest. Despite the wealth of literature on the identification of PAC, speciation at low concentrations remains difficult due to instrument limitation and the complexity of fuel and environmental samples. Consequently on line sample preparation procedures (SPE, SFE, LC, etc.) are becomeing an increasingly important step in the analysis procedure particularly where sample clean-up and fractionation are essential for improving analytical resolution. In this study a normal phase high pressure analytical resolution. In this study a normal phase high pressure liquid chromatography-gas chromatography (LC-GC) system has been developed to provide quantitative analysis of samples, as diverse as coal liquids, petroleum fuels, diesel exhaust particulates, and urban air particulates. Separation and identification of parent and alkylated PAH, hetercycline nitro-and oxy-PAC can be achieved by direct coupling to an atomic emission detector and a bech top mass spectrometer. For both systems the primary LC separation combined with the large sample volume transferred to GC vastly improves detection limits. Furthermore the complimentary nature of the two detectors used enables the positive indentification of many unknowns.     

An investigation into the construction of molecular models by the template joining method

Summary The results of a wide-ranging investigation into some of the different methods available for performing the joining of templates to build molecular models show that the choice of algorithm can significantly affect the quality of the results obtained, and different algorithms are most suited to particular categories of join.